- Foundation
- About 20 min
- 5 practice questions
Integrated rate equations for zero and first order reactions
Derive the integrated rate equations for zero and first order reactions, recognise each from its straight-line graph, and use them to calculate rate constants, concentrations and times.
If something looks wrong, please tell us.
By the end of this lesson you can
- Derive [R] = [R]₀ − kt for a zero order reaction.
- Derive k = (2.303 ÷ t) log ([R]₀ ÷ [R]) for a first order reaction.
- Identify the order of a reaction from the straight-line plot of its data.
- Give examples of zero order and first order reactions, including pseudo first order ones.
The differential rate law needs instantaneous rates, which are awkward to measure: each one needs a tangent. It is far easier to measure concentrations at different times. Integrating the rate law gives an equation that connects these concentrations directly with k and t. The equation is different for each order; here we derive it for orders zero and one.
Zero order reactions
For R → P with rate independent of [R]:
Rate = −d[R]/dt = k[R]⁰ = k, so d[R] = −k dt.
Integrating: [R] = −kt + I, where I is a constant.
At t = 0, [R] = [R]₀, so I = [R]₀.
Therefore [R] = [R]₀ − kt, and k = ([R]₀ − [R]) ÷ t.
A graph of [R] against t is a straight line with slope −k and intercept [R]₀. The concentration falls by the same amount in each equal time interval.
Examples. Zero order behaviour is uncommon and appears under special conditions, mainly on surfaces and with enzymes. The decomposition of ammonia on a hot platinum surface at high pressure, 2NH₃(g) → N₂(g) + 3H₂(g) (Pt, 1130 K), is zero order because the metal surface is already covered with ammonia; adding more gas cannot increase the amount reacting on the surface. The thermal decomposition of HI on gold is another example.
Worked example 1: a zero order reaction
A zero order reaction has k = 2.0 × 10⁻⁴ mol L⁻¹ s⁻¹ and [R]₀ = 0.10 mol L⁻¹. How long does it take for [R] to fall to 0.040 mol L⁻¹?
t = ([R]₀ − [R]) ÷ k = (0.10 − 0.040) ÷ 2.0 × 10⁻⁴ = 0.060 ÷ 2.0 × 10⁻⁴ = 300 s.
First order reactions
For R → P with Rate = k[R]:
−d[R]/dt = k[R], so d[R]/[R] = −k dt.
Integrating: ln[R] = −kt + I. At t = 0, I = ln[R]₀.
So ln[R] = ln[R]₀ − kt, which can be written [R] = [R]₀ e⁻ᵏᵗ, or
k = (1/t) ln ([R]₀ ÷ [R]) = (2.303 ÷ t) log ([R]₀ ÷ [R]).
Between two times t₁ and t₂: k = [2.303 ÷ (t₂ − t₁)] log ([R]₁ ÷ [R]₂).
A plot of ln[R] against t is a straight line with slope −k and intercept ln[R]₀. Equivalently, a plot of log([R]₀/[R]) against t is a straight line through the origin with slope k ÷ 2.303. The concentration falls by the same fraction in each equal time interval.
Examples. Hydrogenation of ethene (Rate = k[C₂H₄]), decomposition of N₂O₅ and N₂O, and all radioactive decay of unstable nuclei, such as ²²⁶Ra → ⁴He + ²²²Rn, follow first order kinetics.
| Order | Integrated rate law | Straight-line plot | Slope | Units of k |
|---|---|---|---|---|
| 0 | [R] = [R]₀ − kt | [R] against t | −k | mol L⁻¹ s⁻¹ |
| 1 | ln[R] = ln[R]₀ − kt | ln[R] against t | −k | s⁻¹ |
| 1 | log([R]₀/[R]) = kt ÷ 2.303 | log([R]₀/[R]) against t | k ÷ 2.303 | s⁻¹ |
Worked example 2: rate constant of a first order reaction
In a first order reaction, the concentration of a reactant falls from 0.80 mol L⁻¹ to 0.20 mol L⁻¹ in 30 minutes. Find k.
k = (2.303 ÷ t) log ([R]₀ ÷ [R]) = (2.303 ÷ 30) log (0.80 ÷ 0.20) = (2.303 ÷ 30) × log 4 = (2.303 ÷ 30) × 0.602 = 0.0462 min⁻¹.
Worked example 3: time for 90% completion
A first order reaction has k = 1.0 × 10⁻³ s⁻¹. How long does it take to go 90% to completion?
After 90% has reacted, [R] = 0.10 [R]₀, so [R]₀ ÷ [R] = 10 and log 10 = 1.
t = (2.303 ÷ k) × 1 = 2.303 ÷ 1.0 × 10⁻³ = 2303 s (about 38 minutes).
Pseudo first order reactions
Some reactions are truly of higher order but behave as first order because one reactant is present in huge excess. In the acid hydrolysis of ethyl acetate, CH₃COOC₂H₅ + H₂O → CH₃COOH + C₂H₅OH, water is the solvent. If 0.01 mol of ester reacts with 10 mol of water, water falls only from 10 to 9.99 mol, so its concentration is effectively constant and the rate depends only on the ester: Rate = k′[ester]. Such reactions are pseudo first order. The inversion of cane sugar, C₁₂H₂₂O₁₁ + H₂O → C₆H₁₂O₆ (glucose) + C₆H₁₂O₆ (fructose), catalysed by acid, is another example: Rate = k[C₁₂H₂₂O₁₁].
Zero order: [R] = [R]₀ − kt. First order: k = (2.303 ÷ t) log ([R]₀ ÷ [R]). Use log 2 = 0.301, log 4 = 0.602, log 10 = 1.
Key takeaways
- Zero order: concentration falls linearly with time; k has units mol L⁻¹ s⁻¹.
- First order: ln[R] falls linearly with time; k has units s⁻¹.
- Choose the plot that gives a straight line to identify the order.
- Reactions with one reactant in large excess can be pseudo first order.
Check your understanding
-
1. For a zero order reaction with k = 0.0050 mol L⁻¹ min⁻¹ and [R]₀ = 0.25 mol L⁻¹, what is [R] after 20 minutes?
- 0.10 mol L⁻¹
- 0.15 mol L⁻¹
- 0.20 mol L⁻¹
- 0.05 mol L⁻¹
Show answer
Answer: B. [R] = [R]₀ − kt = 0.25 − 0.0050 × 20 = 0.25 − 0.10 = 0.15 mol L⁻¹.
-
2. For which order does a plot of ln[R] against time give a straight line?
- Zero order
- Second order
- First order
- Any order
Show answer
Answer: C. The first order integrated law ln[R] = ln[R]₀ − kt has the form y = c + mx with y = ln[R], so ln[R] against t is a straight line of slope −k. For zero order, [R] itself (not ln[R]) is linear in t.
-
3. A first order reaction has k = 2.0 × 10⁻² s⁻¹. If [A]₀ = 1.0 mol L⁻¹, what is [A] after 100 s? (e⁻² ≈ 0.135)
- 0.135 mol L⁻¹
- 0.50 mol L⁻¹
- 0.80 mol L⁻¹
- 0.020 mol L⁻¹
Show answer
Answer: A. [A] = [A]₀ e⁻ᵏᵗ = 1.0 × e^(−2.0 × 10⁻² × 100) = e⁻² ≈ 0.135 mol L⁻¹.
-
4. A first order reaction takes 40 minutes for its concentration to fall to one-quarter of the initial value. What is k?
- 0.0173 min⁻¹
- 0.0231 min⁻¹
- 0.0462 min⁻¹
- 0.0347 min⁻¹
Show answer
Answer: D. k = (2.303 ÷ t) log ([R]₀ ÷ [R]) = (2.303 ÷ 40) × log 4 = (2.303 ÷ 40) × 0.602 = 0.0347 min⁻¹.
-
5. Assertion (A): The acid-catalysed hydrolysis of ethyl acetate in water follows first order kinetics. Reason (R): Water is present in such large excess that its concentration hardly changes during the reaction.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true. The reaction involves ester and water, but water's concentration stays almost constant, so the rate depends only on the ester: it is pseudo first order. R explains A.
Sign in to keep track of the lessons you finish.