Revision notes

Chapter 3 Chemical Kinetics: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Rate of a chemical reaction: average and instantaneous

Average and instantaneous rate

  • Average rate
    • Measured over a finite interval Δt
    • r_av = −Δ[R] ÷ Δt
    • Slope of a chord joining two points on the curve
    • Hides how the rate changes within the interval
  • Instantaneous rate
    • Rate at one moment, as Δt → 0
    • r_inst = −d[R] ÷ dt
    • Slope of the tangent at that point
    • Falls as the reaction proceeds

For aA + bB → cC + dD: Rate = −(1/a) Δ[A]/Δt = −(1/b) Δ[B]/Δt = +(1/c) Δ[C]/Δt = +(1/d) Δ[D]/Δt.

Factors that change the rate of a reaction

  • Concentration (pressure for gases) More reactant particles per unit volume usually means a faster rate; described by the rate law (next lesson).
  • Temperature Most reactions speed up when heated; the Arrhenius equation describes this (lesson 5).
  • Catalyst Provides a path of lower activation energy (lesson 5).
  • Rate = change in concentration per unit time; units mol L⁻¹ s⁻¹ (or atm s⁻¹ for gases).
  • Average rate uses a finite interval; instantaneous rate is the slope of the tangent.
  • Divide each species' rate by its coefficient to get a single rate of reaction.
  • Rate depends on concentration, temperature and catalysts.
Read the full lesson

Lesson 2

Rate law, order and molecularity

Rate laws must be found by experiment
ReactionExperimental rate lawSame as coefficients?
2NO + O₂ → 2NO₂Rate = k[NO]²[O₂]Yes
CHCl₃ + Cl₂ → CCl₄ + HClRate = k[CHCl₃][Cl₂]^½No
CH₃COOC₂H₅ + H₂O → CH₃COOH + C₂H₅OHRate = k[CH₃COOC₂H₅]¹[H₂O]⁰No
Units of the rate constant
Overall orderUnits of k (mol, L, s)
0mol L⁻¹ s⁻¹
1s⁻¹
2L mol⁻¹ s⁻¹
3L² mol⁻² s⁻¹

Order versus molecularity

  • Order
    • Found by experiment
    • Can be 0, a fraction or even negative
    • Defined for elementary and complex reactions
    • For a complex reaction it is set by the slowest step
  • Molecularity
    • A theoretical idea about one step
    • Always a whole number: 1, 2 or 3; never zero
    • Meaningful only for elementary reactions
    • For an elementary reaction it equals the order
  • Rate = k[A]ˣ[B]ʸ; x and y are found by experiment, not from coefficients.
  • Overall order = x + y; units of k = (mol L⁻¹)¹⁻ⁿ s⁻¹.
  • Molecularity is the number of species colliding in one elementary step (1–3).
  • The slowest step of a mechanism determines the rate.
Read the full lesson

Lesson 3

Integrated rate equations for zero and first order reactions

Recognising zero and first order reactions
OrderIntegrated rate lawStraight-line plotSlopeUnits of k
0[R] = [R]₀ − kt[R] against t−kmol L⁻¹ s⁻¹
1ln[R] = ln[R]₀ − ktln[R] against t−ks⁻¹
1log([R]₀/[R]) = kt ÷ 2.303log([R]₀/[R]) against tk ÷ 2.303s⁻¹

Zero order: [R] = [R]₀ − kt. First order: k = (2.303 ÷ t) log ([R]₀ ÷ [R]). Use log 2 = 0.301, log 4 = 0.602, log 10 = 1.

  • Zero order: concentration falls linearly with time; k has units mol L⁻¹ s⁻¹.
  • First order: ln[R] falls linearly with time; k has units s⁻¹.
  • Choose the plot that gives a straight line to identify the order.
  • Reactions with one reactant in large excess can be pseudo first order.
Read the full lesson

Lesson 4

Half-life and applying first order kinetics

First order decay: each half-life halves what is left

  1. Start 100% of the reactant
  2. After 1 half-life 50% remains
  3. After 2 half-lives 25% remains
  4. After 3 half-lives 12.5% remains
  5. After n half-lives (1/2)ⁿ of the original remains
Half-life compared
PropertyZero orderFirst order
Half-lifet½ = [R]₀ ÷ 2kt½ = 0.693 ÷ k
Depends on [R]₀?Yes, directly proportionalNo
Fall in equal timesEqual amountsEqual fractions
  • Zero order: t½ = [R]₀ ÷ 2k, proportional to starting concentration.
  • First order: t½ = 0.693 ÷ k, independent of starting concentration.
  • After n half-lives, (1/2)ⁿ remains; 99.9% completion ≈ 10 half-lives.
  • For A(g) → B(g) + C(g): p_A = 2p_i − p_t.
Read the full lesson

Lesson 5

Effect of temperature and catalysts: Arrhenius equation and collision theory

k = A e^(−Ea/RT), where A is the Arrhenius (frequency or pre-exponential) factor, Ea the activation energy in J mol⁻¹, R = 8.314 J K⁻¹ mol⁻¹ and T the temperature in kelvin.

What a catalyst does and does not do

  • Does
    • Lowers activation energy by an alternative path
    • Speeds up forward and backward reactions equally
    • Helps equilibrium to be reached sooner
    • Works in small amounts
  • Does not
    • Change ΔG of the reaction
    • Make a non-spontaneous reaction happen
    • Change the equilibrium constant
    • Get used up permanently
  • k = A e^(−Ea/RT); ln k against 1/T has slope −Ea/R.
  • log (k₂/k₁) = [Ea ÷ 2.303R] × [(T₂ − T₁) ÷ T₁T₂].
  • Higher temperature enlarges the fraction of molecules with energy ≥ Ea.
  • A catalyst lowers Ea but does not change ΔG or K; effective collisions need energy and orientation.
Read the full lesson

Privacy · Terms · Refunds · Delivery