- Foundation
- About 22 min
- 5 practice questions
Carboxylic acids: preparation, acidity and reactions
Name carboxylic acids, prepare them by oxidation, from nitriles, Grignard reagents, acyl halides and esters, explain their physical properties and acidity with substituent effects and pKa values, and describe their reactions and uses.
If something looks wrong, please tell us.
By the end of this lesson you can
- Give common and IUPAC names of carboxylic acids and describe the carboxyl group.
- Prepare acids from alcohols, aldehydes, alkylbenzenes, nitriles, Grignard reagents, acyl halides and esters.
- Explain why carboxylic acids are stronger than phenols and how substituents change acidity, using pKa.
- Describe reactions: salts and CO₂ evolution, anhydrides, esterification, acyl chlorides, amides, reduction, decarboxylation, HVZ and ring substitution.
The sharp taste of vinegar, the sting of an ant and the smell of rancid butter all come from carboxylic acids. Long-chain acids (C₁₂–C₁₈, fatty acids) are found in fats as esters of glycerol. Carboxylic acids are also the parents of esters, amides, anhydrides and acid chlorides, so they sit at the centre of organic synthesis.
Nomenclature and structure
Common names end in '-ic acid' and recall natural sources: formic acid from ants (Latin formica), acetic acid from vinegar (acetum), butyric acid from rancid butter (butyrum). IUPAC names replace the final 'e' of the alkane by '-oic acid', with the carboxyl carbon as C1. For several –COOH groups, the chain without them is named with 'dicarboxylic acid', 'tricarboxylic acid' and locants, while simple dicarboxylic acids are named as alkanedioic acids.
| Structure | Common name | IUPAC name |
|---|---|---|
| HCOOH | Formic acid | Methanoic acid |
| CH₃COOH | Acetic acid | Ethanoic acid |
| (CH₃)₂CHCOOH | Isobutyric acid | 2-Methylpropanoic acid |
| HOOC–COOH | Oxalic acid | Ethanedioic acid |
| HOOC(CH₂)₄COOH | Adipic acid | Hexanedioic acid |
| C₆H₅COOH | Benzoic acid | Benzenecarboxylic acid (benzoic acid) |
| C₆H₅CH₂COOH | Phenylacetic acid | 2-Phenylethanoic acid |
The bonds to the carboxyl carbon lie in one plane at about 120°. Resonance with the –OH lone pair makes the carboxyl carbon less electrophilic than a carbonyl carbon, so acids do not give the typical addition reactions of aldehydes and ketones.
Preparation
- Oxidation of 1° alcohols and aldehydes: KMnO₄ (neutral, acidic or alkaline), K₂Cr₂O₇ or CrO₃ in acid (Jones reagent): RCH₂OH → RCOOH. Aldehydes are also oxidised by mild oxidants.
- Oxidation of alkylbenzenes: chromic acid or KMnO₄ oxidises the whole side chain, whatever its length, to –COOH, provided it is a 1° or 2° alkyl group (a tertiary group is not affected): C₆H₅CH₂CH₃ → C₆H₅COOH. Suitable alkenes are also oxidised to acids.
- Hydrolysis of nitriles (H⁺ or OH⁻) via amides: RCN → RCONH₂ → RCOOH; mild conditions stop at the amide.
- Grignard reagents + CO₂ (dry ice), then acid: RMgX → RCOOMgX → RCOOH. Nitrile and Grignard routes convert an alkyl halide into an acid with one more carbon (ascending the series).
- Hydrolysis of acyl halides and anhydrides with water (faster with aqueous base, then acid), and of esters: acid hydrolysis gives the acid directly; basic hydrolysis gives the carboxylate, which acid converts to the acid.
Physical properties
Aliphatic acids up to C₉ are colourless liquids with unpleasant smells; higher ones are wax-like, nearly odourless solids. Carboxylic acids boil higher than aldehydes, ketones and even alcohols of similar molar mass, because their molecules associate strongly through hydrogen bonds; most even exist as hydrogen-bonded dimers in the vapour phase or in aprotic solvents. Acids up to four carbons are miscible with water; solubility falls as the hydrocarbon part grows, and benzoic acid is nearly insoluble in cold water. They dissolve in benzene, ether, alcohol and chloroform.
Acidity
Like alcohols, acids liberate H₂ with active metals; like phenols, they form salts with alkalis; but unlike phenols they react with the weaker bases carbonate and hydrogencarbonate, releasing CO₂. This effervescence with NaHCO₃ is the test for a –COOH group. In water: RCOOH + H₂O ⇌ RCOO⁻ + H₃O⁺, with Ka = [RCOO⁻][H₃O⁺] ÷ [RCOOH] and pKa = −log Ka (smaller pKa, stronger acid).
Why acids beat phenols. The carboxylate ion has two equivalent resonance structures with the negative charge on the two electronegative oxygen atoms. In phenoxide the charge is spread less effectively, onto less electronegative carbon atoms, through non-equivalent structures. So carboxylate is more stabilised, and carboxylic acids (pKa about 4–5) are stronger than phenol (about 10) and ethanol (about 16), though weaker than mineral acids (HCl about −7).
Substituent effects. Electron-withdrawing groups stabilise the carboxylate and increase acidity; electron-donating groups decrease it. Strength of the effect: Ph < I < Br < Cl < F < CN < NO₂ < CF₃. The effect grows with the number of such groups and fades with distance from –COOH: CF₃COOH (pKa 0.23) > CCl₃COOH > CHCl₂COOH > ClCH₂COOH > HCOOH > CH₃COOH (4.76) > CH₃CH₂COOH. A phenyl or vinyl group directly on –COOH increases acidity (sp² carbon is more electronegative): benzoic acid (4.19) is stronger than acetic acid. On the ring, –NO₂ increases acidity (4-nitrobenzoic acid 3.41) and –OCH₃ decreases it (4-methoxybenzoic acid 4.46).
Worked example 1: comparing and using pKa
(a) How many times stronger is benzoic acid (pKa 4.19) than acetic acid (pKa 4.76)? (b) Estimate the pH of 0.10 M acetic acid.
(a) Ratio of Ka = 10^(4.76 − 4.19) = 10^0.57 ≈ 3.7 times.
(b) Ka = 10^(−4.76) = 1.74 × 10⁻⁵. [H⁺] ≈ √(Ka × c) = √(1.74 × 10⁻⁶) = 1.32 × 10⁻³ M; pH = 2.88.
Reactions of the –OH part and the carbonyl part
- Anhydride: heating with a dehydrating agent such as P₂O₅ (or H₂SO₄): 2CH₃COOH → (CH₃CO)₂O + H₂O.
- Esterification: with alcohols or phenols and concentrated H₂SO₄ or dry HCl. Mechanism (nucleophilic acyl substitution): protonation of the carbonyl oxygen activates it; the alcohol adds; a proton transfer turns –OH into –OH₂⁺, a good leaving group; water leaves; the protonated ester loses H⁺. The reaction is reversible, so water or ester is removed as it forms.
- Acyl chlorides: PCl₅, PCl₃ or SOCl₂ replace –OH by Cl; SOCl₂ is preferred because SO₂ and HCl escape as gases.
- Amides: with ammonia the acid first gives an ammonium salt, which on strong heating loses water to give the amide: CH₃COONH₄ → CH₃CONH₂ + H₂O.
Reactions of the –COOH group and of the hydrocarbon part
- Reduction: LiAlH₄, or better diborane, reduces –COOH to –CH₂OH (diborane leaves ester, nitro and halo groups alone). NaBH₄ does not reduce –COOH.
- Decarboxylation: sodium salts heated with soda lime (NaOH and CaO, 3 : 1) lose CO₂: RCOONa → RH + Na₂CO₃. Kolbe electrolysis of aqueous sodium or potassium salts gives a hydrocarbon with twice the number of carbons in the alkyl group (2CH₃COONa → C₂H₆).
- Hell–Volhard–Zelinsky (HVZ) reaction: acids with an α-hydrogen react with Cl₂ or Br₂ and a little red phosphorus to give α-halo acids.
- Ring substitution: –COOH deactivates the ring and directs meta (benzoic acid gives m-nitrobenzoic acid). Aromatic acids do not undergo Friedel–Crafts reactions, because the ring is deactivated and AlCl₃ binds to the carboxyl group.
Worked example 2: carbon dioxide from an acid
0.60 g of ethanoic acid (60 g mol⁻¹) reacts completely with excess sodium hydrogencarbonate. What mass of CO₂ is released?
CH₃COOH + NaHCO₃ → CH₃COONa + H₂O + CO₂ (1 : 1).
n(acid) = 0.60 ÷ 60 = 0.010 mol → n(CO₂) = 0.010 mol; mass = 0.010 × 44 = 0.44 g. Phenol, being a weaker acid than carbonic acid, would release no CO₂.
Uses
- Methanoic acid: rubber, textile, dyeing, leather and electroplating industries.
- Ethanoic acid: solvent, and vinegar in the food industry.
- Hexanedioic acid: manufacture of nylon-6,6.
- Benzoic acid: its esters in perfumery; sodium benzoate as a food preservative. Higher fatty acids: soaps and detergents.
Key takeaways
- -oic acid; acids prepared by oxidation, from nitriles or Grignard + CO₂ (one more carbon), or by hydrolysis.
- Strong hydrogen bonding (dimers) gives high boiling points; acids release CO₂ from NaHCO₃.
- Carboxylate is stabilised by two equivalent resonance forms; electron-withdrawing groups increase acidity.
- Reactions: esters, anhydrides, acyl chlorides (SOCl₂), amides, LiAlH₄/B₂H₆ reduction, soda-lime decarboxylation, HVZ α-halogenation, meta substitution.
Check your understanding
-
1. Which test distinguishes benzoic acid from phenol?
- Reaction with sodium metal
- Solubility in ether
- Effervescence with sodium hydrogencarbonate
- Reaction with aqueous NaOH
Show answer
Answer: C. Benzoic acid is strong enough to react with NaHCO₃ and release CO₂ (effervescence); phenol, being a weaker acid than carbonic acid, does not. Both react with sodium and with NaOH.
-
2. Which is the strongest acid?
- CH₃COOH
- ClCH₂COOH
- FCH₂COOH
- CF₃COOH
Show answer
Answer: D. Three strongly electron-withdrawing fluorine atoms on the α-carbon stabilise the carboxylate most, so CF₃COOH (pKa 0.23) is the strongest. One F or Cl helps less, and CH₃COOH has none.
-
3. What is formed when sodium propanoate is heated with soda lime?
- Ethane
- Propane
- Butane
- Ethene
Show answer
Answer: A. Decarboxylation removes the –COONa carbon as Na₂CO₃ and replaces it by H: CH₃CH₂COONa + NaOH → CH₃CH₃ + Na₂CO₃. The product has one carbon fewer: ethane.
-
4. Which reagent converts CH₃CH₂COOH into CH₃CHBrCOOH?
- Br₂ with red phosphorus
- HBr
- Br₂ in water only
- PBr₃ alone
Show answer
Answer: A. The Hell–Volhard–Zelinsky reaction (Br₂ with a little red phosphorus) substitutes bromine at the α-carbon of an acid with α-hydrogens, giving 2-bromopropanoic acid. PBr₃ alone would give the acyl bromide.
-
5. Assertion (A): Carboxylic acids are more acidic than phenols. Reason (R): Phenoxide ion has more resonance structures than carboxylate ion.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: B. Both statements are true, but R does not explain A. Carboxylic acids are stronger because the carboxylate's charge is spread over two electronegative oxygen atoms in equivalent structures, while phenoxide's structures put charge on less electronegative carbon. The number of structures is not the deciding factor.
Sign in to keep track of the lessons you finish.