• Foundation
  • About 20 min
  • 5 practice questions

Oxidation, haloform, aldol and Cannizzaro reactions

Distinguish aldehydes from ketones with Tollens' and Fehling's tests, explain the haloform reaction, the acidity of α-hydrogens, aldol and cross aldol condensation and the Cannizzaro reaction, and describe ring substitution and the uses of aldehydes and ketones.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain why aldehydes are easily oxidised and use Tollens' and Fehling's tests to distinguish them from ketones.
  • Use the haloform (iodoform) reaction to detect CH₃CO– and CH₃CH(OH)– groups.
  • Explain the acidity of α-hydrogens and predict aldol and cross aldol products.
  • Predict Cannizzaro products for aldehydes without α-hydrogens, and give uses of carbonyl compounds.

Aldehydes and ketones look alike, but simple test-tube reactions tell them apart: one makes a silver mirror, the other does not. Hydrogens next to the carbonyl group give these compounds another set of reactions that join small molecules into bigger ones, the foundation of many syntheses.

Oxidation

Aldehydes are easily oxidised to carboxylic acids, because the carbonyl carbon carries a hydrogen. Strong oxidants (HNO₃, KMnO₄, K₂Cr₂O₇) and even mild ones do this. Ketones are oxidised only under vigorous conditions (strong oxidants, high temperature), which break C–C bonds and give a mixture of acids with fewer carbon atoms.

  • Tollens' test: warming an aldehyde with freshly prepared ammoniacal silver nitrate (Tollens' reagent) produces a bright silver mirror. The aldehyde is oxidised to the carboxylate ion in this alkaline medium: RCHO + 2[Ag(NH₃)₂]⁺ + 3OH⁻ → RCOO⁻ + 2Ag + 2H₂O + 4NH₃.
  • Fehling's test: Fehling solution A (aqueous CuSO₄) and Fehling solution B (alkaline sodium potassium tartrate, Rochelle salt) are mixed in equal amounts. Heating with an aldehyde gives a reddish-brown precipitate of Cu₂O: RCHO + 2Cu²⁺ + 5OH⁻ → RCOO⁻ + Cu₂O + 3H₂O. Aromatic aldehydes do not respond to this test.
  • Ketones give neither test, so these tests distinguish aldehydes from ketones.

Worked example 1: mass of silver deposited

0.10 mol of propanal is warmed with excess Tollens' reagent. What mass of silver is deposited? (Ag = 108 g mol⁻¹)

Each RCHO is oxidised to RCOO⁻, a two-electron change, and each Ag⁺ takes one electron, so 1 mol of aldehyde deposits 2 mol of Ag.
n(Ag) = 2 × 0.10 = 0.20 mol; mass = 0.20 × 108 = 21.6 g.

The haloform reaction

Aldehydes and ketones with a methyl group on the carbonyl carbon (CH₃CO–, i.e. methyl ketones and ethanal) are oxidised by sodium hypohalite (NaOX) to the sodium salt of an acid with one carbon fewer, while the methyl group becomes haloform, CHX₃. A C=C bond elsewhere in the molecule is not attacked. With sodium hypoiodite (I₂ + NaOH), yellow iodoform, CHI₃, precipitates: the iodoform test detects CH₃CO– and also CH₃CH(OH)– groups (which are first oxidised to CH₃CO–). Examples: ethanol, propan-2-ol, ethanal, propanone and acetophenone give the test; methanol, propanal and pentan-3-one do not.

Worked example 2: identifying an unknown

Compound A, C₈H₈O, gives an orange precipitate with 2,4-DNP and a yellow precipitate with I₂/NaOH, does not reduce Tollens' or Fehling's reagent, and does not decolourise bromine water. Strong oxidation gives benzoic acid, C₇H₆O₂. Identify A.

2,4-DNP positive → aldehyde or ketone. Tollens' and Fehling's negative → ketone. Iodoform positive → methyl ketone (CH₃CO–). The formula is highly unsaturated but bromine water is not decolourised → a benzene ring, not C=C. Benzoic acid on oxidation → one substituent on the ring.
A = acetophenone, C₆H₅COCH₃. With I₂/NaOH it gives CHI₃ and sodium benzoate.

Reactions due to α-hydrogens

Hydrogens on the carbon next to C=O (the α-carbon) are acidic, because the carbonyl group withdraws electrons strongly and the resulting carbanion (enolate) is stabilised by resonance.

Aldol reaction. Aldehydes and ketones with at least one α-hydrogen react in the presence of dilute alkali to give β-hydroxy aldehydes (aldols) or β-hydroxy ketones (ketols): 2CH₃CHO → CH₃CH(OH)CH₂CHO (3-hydroxybutanal). On heating these lose water to give α,β-unsaturated carbonyl compounds, e.g. CH₃CH=CHCHO (but-2-enal): aldol condensation. Ketones such as propanone react similarly, giving 4-hydroxy-4-methylpentan-2-one and then 4-methylpent-3-en-2-one.

Cross aldol condensation is between two different carbonyl compounds. If both have α-hydrogens, four products form (each can act as the nucleophile or the electrophile). With ethanal and propanal, the two self-condensation products are but-2-enal and 2-methylpent-2-enal, and the two crossed products are pent-2-enal and 2-methylbut-2-enal. Ketones can also be one partner.

Aldol reaction of ethanal in dilute alkali

  1. Enolate forms OH⁻ removes an α-hydrogen from CH₃CHO to give ⁻CH₂CHO.
  2. Nucleophilic addition ⁻CH₂CHO attacks the C=O of another ethanal molecule.
  3. Protonation Water protonates the alkoxide, giving the aldol CH₃CH(OH)CH₂CHO and OH⁻.
  4. OH⁻ regenerated The catalyst can start another cycle; heating removes water to give but-2-enal.

Then back to step 1: Enolate forms

Cannizzaro reaction. Aldehydes with no α-hydrogen (such as HCHO, C₆H₅CHO, (CH₃)₃CCHO) undergo self oxidation–reduction (disproportionation) when heated with concentrated alkali: one molecule is reduced to the alcohol and another oxidised to the carboxylate salt. 2HCHO + conc. KOH → CH₃OH + HCOOK; 2C₆H₅CHO + conc. NaOH → C₆H₅CH₂OH + C₆H₅COONa.

Electrophilic substitution. In aromatic aldehydes and ketones the carbonyl group deactivates the ring and is meta-directing: benzaldehyde with concentrated HNO₃/H₂SO₄ gives m-nitrobenzaldehyde.

Uses of aldehydes and ketones

  • Formaldehyde: 40% solution (formalin) preserves biological specimens; used to make bakelite (phenol–formaldehyde resin), urea–formaldehyde glues and other polymers.
  • Acetaldehyde: starting material for acetic acid, ethyl acetate, vinyl acetate, polymers and drugs.
  • Benzaldehyde: perfumery and dye industries.
  • Acetone and ethyl methyl ketone: common industrial solvents. Butyraldehyde, vanillin, acetophenone and camphor are valued for odour and flavour.

Key takeaways

  • Aldehydes reduce Tollens' (silver mirror) and Fehling's (red-brown Cu₂O; not aromatic aldehydes); ketones do not.
  • Iodoform test detects CH₃CO– and CH₃CH(OH)– groups.
  • α-H present + dilute alkali → aldol (β-hydroxy carbonyl) → α,β-unsaturated product on heating.
  • No α-H + concentrated alkali → Cannizzaro (alcohol + carboxylate); C=O is meta-directing.

Check your understanding

  1. 1. Which compound gives a positive iodoform test?

    1. Propanal
    2. Pentan-3-one
    3. Methanol
    4. Propan-2-ol
    Show answer

    Answer: D. Propan-2-ol contains CH₃CH(OH)–, which hypoiodite oxidises to CH₃CO–, and that gives iodoform. Propanal, pentan-3-one and methanol have no CH₃CO– or CH₃CH(OH)– group.

  2. 2. Which reagent distinguishes propanal from propanone?

    1. 2,4-DNP reagent
    2. Tollens' reagent
    3. Sodium hydrogensulphite
    4. Hydroxylamine
    Show answer

    Answer: B. Propanal, an aldehyde, reduces Tollens' reagent to a silver mirror; propanone, a ketone, does not. 2,4-DNP, NaHSO₃ and NH₂OH react with both carbonyl compounds.

  3. 3. Which aldehyde undergoes the Cannizzaro reaction?

    1. 2,2-Dimethylpropanal
    2. Ethanal
    3. Propanal
    4. 2-Methylpropanal
    Show answer

    Answer: A. The Cannizzaro reaction needs an aldehyde with no α-hydrogen. In (CH₃)₃CCHO the α-carbon carries three methyl groups and no hydrogen. The others have α-hydrogens and undergo aldol reactions instead.

  4. 4. What is the aldol product of ethanal in dilute NaOH, before dehydration?

    1. But-2-enal
    2. Butanal
    3. 3-Hydroxybutanal
    4. Ethanoic acid
    Show answer

    Answer: C. The enolate of one ethanal molecule adds to the C=O of another, giving CH₃CH(OH)CH₂CHO, 3-hydroxybutanal (a β-hydroxy aldehyde). Heating removes water to give but-2-enal.

  5. 5. 0.050 mol of propanone reacts completely in the iodoform reaction. What mass of iodoform (CHI₃, 394 g mol⁻¹) forms?

    1. 9.85 g
    2. 19.7 g
    3. 39.4 g
    4. 1.97 g
    Show answer

    Answer: B. Each CH₃COCH₃ gives one CHI₃ (and an acetate ion). n(CHI₃) = 0.050 mol; mass = 0.050 × 394 = 19.7 g.

Privacy · Terms · Refunds · Delivery