• Foundation
  • About 20 min
  • 5 practice questions

Preparation of aldehydes and ketones

Prepare aldehydes and ketones from alcohols, alkenes and alkynes, prepare aldehydes by Rosenmund, Stephen and DIBAL-H reductions and from toluene (Etard, CrO₃, side-chain chlorination, Gattermann–Koch), and prepare ketones from acyl chlorides, nitriles and by Friedel–Crafts acylation.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Prepare aldehydes and ketones by oxidation and dehydrogenation of alcohols, ozonolysis and alkyne hydration.
  • Reduce acyl chlorides, nitriles and esters to aldehydes (Rosenmund, Stephen, DIBAL-H).
  • Convert toluene and benzene into benzaldehyde by four methods.
  • Prepare ketones using dialkylcadmium, Grignard reagents with nitriles, and Friedel–Crafts acylation.

To make an aldehyde, the challenge is to stop at the right stage: aldehydes are easily oxidised further to acids, or reduced further to alcohols. Each method in this lesson either oxidises gently or reduces selectively. For ketones the problem is easier, because ketones resist both further oxidation and over-reduction under mild conditions.

Methods for both aldehydes and ketones

  • Oxidation of alcohols: 1° alcohols → aldehydes (PCC or CrO₃ in anhydrous medium); 2° alcohols → ketones (CrO₃).
  • Dehydrogenation of alcohols: vapours passed over heated Ag or Cu; suitable for volatile alcohols and used industrially. 1° → aldehyde, 2° → ketone.
  • Ozonolysis of alkenes: O₃, then zinc dust and water, cleaves the C=C to give aldehydes, ketones or both, depending on the groups on each alkene carbon.
  • Hydration of alkynes: water with H₂SO₄ and HgSO₄. Ethyne gives ethanal; all other alkynes give ketones (propyne → propanone).

Preparation of aldehydes

Rosenmund reduction: an acyl chloride is hydrogenated over palladium on barium sulphate (a partly poisoned catalyst that stops the reduction at the aldehyde): RCOCl + H₂ → RCHO + HCl.
Stephen reaction: a nitrile is reduced by SnCl₂ and HCl to an imine, which is hydrolysed to the aldehyde: RC≡N → RCH=NH → RCHO.
DIBAL-H: diisobutylaluminium hydride selectively reduces nitriles (via the imine, then hydrolysis) and esters to aldehydes.

Aromatic aldehydes from toluene. Strong oxidants take toluene all the way to benzoic acid, so special reagents are used to stop at benzaldehyde:
• Etard reaction: chromyl chloride, CrO₂Cl₂, converts the methyl group into a chromium complex that hydrolyses to benzaldehyde.
• CrO₃ in acetic anhydride: gives benzylidene diacetate, which aqueous acid hydrolyses to benzaldehyde.
• Side-chain chlorination then hydrolysis: Cl₂ in light gives benzal chloride, C₆H₅CHCl₂, which water hydrolyses to benzaldehyde. This is a commercial method.
Gattermann–Koch reaction: benzene (or a derivative) with carbon monoxide and HCl in the presence of anhydrous AlCl₃ or CuCl gives benzaldehyde directly.

Routes to benzaldehyde

  • From toluene
    • Etard: CrO₂Cl₂, then H₂O
    • CrO₃ in (CH₃CO)₂O, then H₃O⁺
    • Cl₂/light → benzal chloride, then H₂O
  • From benzene
    • Gattermann–Koch: CO + HCl, anhydrous AlCl₃ or CuCl
  • From other compounds
    • Rosenmund: C₆H₅COCl + H₂, Pd–BaSO₄
    • Stephen or DIBAL-H: from C₆H₅CN

Preparation of ketones

  • From acyl chlorides and dialkylcadmium: a Grignard reagent with CdCl₂ gives R₂Cd, which reacts with an acyl chloride: 2R′COCl + R₂Cd → 2R′COR + CdCl₂.
  • From nitriles and Grignard reagents: RMgX adds to the C≡N; hydrolysis of the product gives a ketone. CH₃CH₂CN + C₆H₅MgBr, then H₃O⁺ → C₆H₅COCH₂CH₃ (propiophenone).
  • Friedel–Crafts acylation: benzene + an acyl chloride with anhydrous AlCl₃ gives an aromatic ketone: C₆H₆ + CH₃COCl → C₆H₅COCH₃ + HCl.

Worked example 1: choosing reagents

Name a reagent for each change: (a) hexan-1-ol → hexanal, (b) cyclohexanol → cyclohexanone, (c) ethanenitrile → ethanal, (d) but-2-ene → ethanal, (e) p-nitrotoluene → p-nitrobenzaldehyde.
(a) PCC (stops at the aldehyde). (b) CrO₃ (or PCC). (c) DIBAL-H, then hydrolysis (or SnCl₂/HCl, Stephen). (d) O₃, then Zn and H₂O: CH₃CH=CHCH₃ splits into two CH₃CHO. (e) CrO₂Cl₂ then H₂O (Etard), or CrO₃ in acetic anhydride then acid.

Worked example 2: Friedel–Crafts yield

15.6 g of benzene (78 g mol⁻¹) is acylated with excess ethanoyl chloride and anhydrous AlCl₃. What is the theoretical mass of acetophenone (C₆H₅COCH₃, 120 g mol⁻¹)? If 18.0 g is obtained, what is the percentage yield?

n(benzene) = 15.6 ÷ 78 = 0.20 mol → 0.20 mol acetophenone.
Theoretical mass = 0.20 × 120 = 24.0 g. Percentage yield = 18.0 ÷ 24.0 × 100 = 75%.

Key takeaways

  • Alcohols: 1° → aldehyde (PCC), 2° → ketone; Cu/Ag dehydrogenation; ozonolysis; alkyne hydration (only ethyne gives an aldehyde).
  • Aldehydes by selective reduction: Rosenmund (RCOCl, Pd–BaSO₄), Stephen (RCN, SnCl₂/HCl), DIBAL-H (nitriles, esters).
  • Benzaldehyde: Etard, CrO₃/acetic anhydride, benzal chloride hydrolysis, Gattermann–Koch.
  • Ketones: R₂Cd + acyl chloride; RMgX + nitrile; Friedel–Crafts acylation.

Check your understanding

  1. 1. Which reaction converts benzoyl chloride into benzaldehyde?

    1. Stephen reaction
    2. Rosenmund reduction with H₂ over Pd–BaSO₄
    3. Etard reaction
    4. Clemmensen reduction
    Show answer

    Answer: B. Hydrogenation of an acyl chloride over palladium poisoned with barium sulphate stops at the aldehyde: C₆H₅COCl + H₂ → C₆H₅CHO + HCl. The Stephen reaction starts from a nitrile and the Etard reaction from toluene.

  2. 2. What is formed when propyne is treated with water in the presence of H₂SO₄ and HgSO₄?

    1. Propanal
    2. Propan-1-ol
    3. Propanone
    4. Propanoic acid
    Show answer

    Answer: C. Water adds by Markovnikov's rule to give an enol that rearranges to a ketone. Only ethyne gives an aldehyde (ethanal); propyne gives propanone.

  3. 3. Which reagent converts toluene into benzaldehyde in the Etard reaction?

    1. CrO₂Cl₂, then hydrolysis
    2. Acidified KMnO₄
    3. CO and HCl with AlCl₃
    4. SnCl₂ and HCl
    Show answer

    Answer: A. Chromyl chloride forms a chromium complex with the methyl group, which hydrolyses to benzaldehyde without going on to benzoic acid. KMnO₄ would give benzoic acid; CO/HCl/AlCl₃ is the Gattermann–Koch reaction on benzene.

  4. 4. Which pair gives propiophenone (C₆H₅COCH₂CH₃) after hydrolysis?

    1. C₆H₅MgBr + HCHO
    2. C₆H₅CHO + CH₃MgBr
    3. C₆H₅COCl + H₂/Pd–BaSO₄
    4. CH₃CH₂CN + C₆H₅MgBr
    Show answer

    Answer: D. A Grignard reagent adds to a nitrile, and hydrolysis of the product gives a ketone. Phenylmagnesium bromide with propanenitrile gives C₆H₅COCH₂CH₃. The other options give alcohols or an aldehyde.

  5. 5. 23.4 g of benzene (78 g mol⁻¹) undergoes complete Friedel–Crafts acylation with ethanoyl chloride. What mass of acetophenone (120 g mol⁻¹) forms?

    1. 24.0 g
    2. 36.0 g
    3. 23.4 g
    4. 30.0 g
    Show answer

    Answer: B. n(benzene) = 23.4 ÷ 78 = 0.30 mol, giving 0.30 mol of acetophenone. Mass = 0.30 × 120 = 36.0 g.

Privacy · Terms · Refunds · Delivery