- Foundation
- About 18 min
- 5 practice questions
The carbonyl group: nomenclature, structure and physical properties
Name aldehydes and ketones by common and IUPAC rules, describe the planar, polar carbonyl group, and explain the boiling points and solubility of carbonyl compounds compared with hydrocarbons, ethers and alcohols.
If something looks wrong, please tell us.
By the end of this lesson you can
- Give common and IUPAC names of aldehydes and ketones, including ring and aromatic compounds.
- Describe the sp² carbonyl carbon, the 120° bond angles and the polarity of C=O.
- Explain why aldehydes and ketones boil above ethers and alkanes but below alcohols of similar mass.
- Find a molecular formula from percentage composition and molar mass.
The carbonyl group, >C=O, is one of the most important functional groups in organic chemistry. In aldehydes it is bonded to a carbon and a hydrogen (or two hydrogens in methanal); in ketones it is bonded to two carbon atoms. With –OH on the carbonyl carbon we have carboxylic acids, and their relatives are amides, acyl halides, esters and anhydrides. Carbonyl compounds give vanilla, cinnamon and many flowers their fragrance, and are used in fabrics, plastics, drugs, adhesives and paints; acetone is a familiar solvent.
Naming aldehydes and ketones
Common names. Aldehydes take the common name of the related acid with '-ic acid' replaced by 'aldehyde' (formic acid → formaldehyde). Substituent positions are marked with Greek letters: the α-carbon is the one next to the CHO group, then β, γ and so on. Ketones are named from the two groups on the carbonyl carbon (methyl n-propyl ketone); the simplest is acetone; alkyl phenyl ketones are named by adding the acyl group to 'phenone' (acetophenone).
IUPAC names. Replace the final 'e' of the alkane by '-al' for aldehydes and '-one' for ketones. For aldehydes the chain is numbered from the CHO carbon (always C1, so no locant is needed); for ketones, from the end nearer the C=O. In cyclic ketones the carbonyl carbon is C1. When –CHO is attached to a ring, add 'carbaldehyde' to the ring name (cyclohexanecarbaldehyde). The simplest aromatic aldehyde is benzenecarbaldehyde, but the name benzaldehyde is also accepted.
| Structure | Common name | IUPAC name |
|---|---|---|
| HCHO | Formaldehyde | Methanal |
| CH₃CHO | Acetaldehyde | Ethanal |
| (CH₃)₂CHCHO | Isobutyraldehyde | 2-Methylpropanal |
| CH₂=CHCHO | Acrolein | Prop-2-enal |
| CH₃COCH₂CH₂CH₃ | Methyl n-propyl ketone | Pentan-2-one |
| (CH₃)₂CHCOCH(CH₃)₂ | Diisopropyl ketone | 2,4-Dimethylpentan-3-one |
| (CH₃)₂C=CHCOCH₃ | Mesityl oxide | 4-Methylpent-3-en-2-one |
| C₆H₅COCH₃ | Acetophenone | 1-Phenylethan-1-one |
Structure of the carbonyl group
The carbonyl carbon is sp² hybridised and forms three σ bonds; its remaining p orbital overlaps with a p orbital of oxygen to form a π bond. So the carbonyl carbon and the three atoms attached to it lie in one plane, with bond angles of about 120° (trigonal planar), and the π electron cloud lies above and below that plane. Oxygen also carries two lone pairs.
Oxygen is more electronegative than carbon, so the C=O bond is polar: the carbon is an electrophilic (Lewis acid) centre and the oxygen a nucleophilic (Lewis base) centre. The polarity is described by resonance between a neutral structure, >C=O, and a dipolar one, >C⁺–O⁻. Carbonyl compounds have large dipole moments and are more polar than ethers.
Physical properties
Methanal is a gas at room temperature, ethanal a volatile liquid, and the others liquids or solids. Aldehydes and ketones boil higher than hydrocarbons and ethers of similar molar mass because of dipole–dipole attraction between their polar molecules, but lower than alcohols, because they cannot hydrogen-bond with one another.
| Compound | Molar mass / g mol⁻¹ | Boiling point / K |
|---|---|---|
| n-Butane | 58 | 273 |
| Methoxyethane | 60 | 281 |
| Propanal | 58 | 322 |
| Propanone (acetone) | 58 | 329 |
| Propan-1-ol | 60 | 370 |
Solubility. Methanal, ethanal and propanone mix with water in all proportions because their oxygen accepts hydrogen bonds from water; solubility falls quickly as the alkyl chain grows. All are fairly soluble in organic solvents. Odour: the lower aldehydes smell sharp and pungent; larger ones are more fragrant, and many are used in perfumes and flavours.
Worked example 1: ordering boiling points
Arrange in increasing boiling point: CH₃CH₂CH₂CHO, CH₃CH₂CH₂CH₂OH, C₂H₅OC₂H₅, CH₃CH₂CH₂CH₂CH₃ (all about 72–74 g mol⁻¹).
Pentane has only weak van der Waals forces; ethoxyethane is weakly polar; butanal is strongly polar (dipole–dipole); butan-1-ol hydrogen-bonds.
Order: pentane < ethoxyethane < butanal < butan-1-ol.
Worked example 2: formula from composition
A carbonyl compound contains 66.7% C, 11.1% H and 22.2% O by mass, and its molar mass is 72 g mol⁻¹. Find its molecular formula and possible structures.
Moles in 100 g: C = 66.7 ÷ 12 = 5.56; H = 11.1 ÷ 1 = 11.1; O = 22.2 ÷ 16 = 1.39.
Divide by 1.39: C 4, H 8, O 1 → empirical formula C₄H₈O (mass 72), the same as the molecular formula.
Carbonyl compounds C₄H₈O: butanal, 2-methylpropanal and butan-2-one. A test with Tollens' reagent (lesson 4) would tell the aldehydes from the ketone.
Key takeaways
- IUPAC: -al (CHO carbon is C1), -one (lowest locant to C=O), -carbaldehyde on rings.
- Carbonyl carbon: sp², trigonal planar, about 120°; C=O is polar with an electrophilic carbon.
- Boiling points: alkanes < ethers < aldehydes/ketones < alcohols of similar molar mass.
- Lower aldehydes and ketones are water-soluble through hydrogen bonding with water.
Check your understanding
-
1. What is the IUPAC name of CH₃CH₂COCH₃?
- Butan-3-one
- Butanal
- Butan-2-one
- Methyl ethyl ketone-2
Show answer
Answer: C. Number from the end nearer the C=O: the carbonyl carbon is C2 of a four-carbon chain, giving butan-2-one. (Its common name is ethyl methyl ketone.)
-
2. What is the hybridisation of the carbonyl carbon, and the approximate bond angle around it?
- sp³, 109.5°
- sp², 120°
- sp, 180°
- sp², 90°
Show answer
Answer: B. The carbonyl carbon forms three σ bonds and one π bond, so it is sp² hybridised with a trigonal planar arrangement and bond angles of about 120°.
-
3. Which has the highest boiling point among these compounds of molar mass 58–60 g mol⁻¹?
- Propan-1-ol
- Propanone
- Propanal
- Methoxyethane
Show answer
Answer: A. Propan-1-ol (370 K) forms intermolecular hydrogen bonds, which are stronger than the dipole–dipole forces in propanone (329 K) and propanal (322 K) and the weak forces in methoxyethane (281 K).
-
4. Why are methanal, ethanal and propanone miscible with water?
- They are ionic
- They react with water to form acids
- They are non-polar
- Their carbonyl oxygen forms hydrogen bonds with water molecules
Show answer
Answer: D. The lone pairs on the carbonyl oxygen accept hydrogen bonds from water's O–H. For small molecules this outweighs the hydrophobic alkyl part, so they mix in all proportions.
-
5. Assertion (A): Aldehydes and ketones boil at higher temperatures than ethers of comparable molar mass. Reason (R): Aldehydes and ketones form intermolecular hydrogen bonds with one another.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: C. A is true. R is false: aldehydes and ketones have no O–H or N–H, so they cannot hydrogen-bond with one another. Their higher boiling points come from strong dipole–dipole attraction between the very polar C=O groups.
Sign in to keep track of the lessons you finish.