Revision notes

Chapter 3 Production and Costs: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Production function, short run and long run, and isoquants

Production function: q = f(L, K), where q is the maximum output obtainable from L units of labour and K units of capital with the given technology.

Maximum output (units) for each L and K (illustrative)
Labour (L)K = 1K = 2K = 3K = 4
14101518
210223035
315304046
418354652

Short run and long run

  • Short run
    • At least one factor cannot be varied
    • Fixed factor and variable factor both exist
    • Output changed only by varying the variable factor
    • Example: machines fixed at 2, workers varied
  • Long run
    • All factors can be varied
    • No fixed factor
    • Both inputs may be changed together
    • Example: workers and machines both increased

From inputs to the firm's goal

  1. Inputs: labour, capital and others Bought at a cost
  2. Production function Maximum output from each input combination
  3. Output sold Earns revenue
  4. Profit = revenue − cost The firm aims to maximise it

Key takeaways: production transforms inputs into output; profit is revenue minus cost and the firm maximises it. The production function q = f(L, K) gives the maximum output from each input combination with given technology. In the short run at least one factor is fixed; in the long run all factors vary. An isoquant joins input combinations giving the same output and slopes downward.

Read the full lesson

Lesson 2

Total, average and marginal product and the law of variable proportions

Total, marginal and average product with land fixed (illustrative)
Workers (L)TP (quintals)MP (quintals)AP (quintals)
00--
1888
2201210
3361612
4481212
555711
65839.67
75808.29

Law of variable proportions: with other factors fixed, the marginal product of a variable factor first rises and, beyond some level of employment, falls.

Why marginal product first rises and then falls

  1. Few workers on fixed land Land under-used; factor proportions unsuitable
  2. More workers added Proportions become more suitable; MP rises
  3. Best proportion passed Land gets crowded
  4. Still more workers Each adds less; MP falls
MP and AP
Relationship between MP and APWhat happens to AP
MP greater than APAP rises
MP equal to APAP is at its maximum
MP less than APAP falls

Key takeaways: TP is output from the variable input with others fixed; AP = TP/L; MP = ΔTP/ΔL; TP is the sum of MPs. By the law of variable proportions, MP first rises then falls because factor proportions first improve and then become crowded. MP and AP curves are inverse U-shaped; MP cuts AP from above at AP's maximum.

Read the full lesson

Lesson 3

Returns to scale and the cost function

Returns to scale (all inputs increased in the same proportion)

  • Constant returns to scale (CRS)
    • Output rises in the same proportion
    • Inputs doubled, output doubled
    • f(tL, tK) = t·f(L, K)
  • Increasing returns to scale (IRS)
    • Output rises in a larger proportion
    • Inputs doubled, output more than doubled
    • f(tL, tK) > t·f(L, K)
  • Decreasing returns to scale (DRS)
    • Output rises in a smaller proportion
    • Inputs doubled, output less than doubled
    • f(tL, tK) < t·f(L, K)
t is the factor (greater than 1) by which every input is multiplied.
Two different ideas
BasisLaw of variable proportionsReturns to scale
PeriodShort runLong run
Inputs changedOnly one; the other is fixedAll, in the same proportion
Factor proportionsChangeStay the same
What is studiedMarginal product of the variable factorProportionate change in output

Cobb-Douglas q = x1^α x2^β: α + β = 1 gives constant returns to scale; α + β > 1 gives increasing returns; α + β < 1 gives decreasing returns.

Building the cost function

  1. Desired output level For example 30 units
  2. All input combinations that can produce it Points on that isoquant
  3. Cost of each at given input prices Workers × wage + machines × rental
  4. Pick the cheapest This least cost is the value of the cost function at that output

Key takeaways: returns to scale describe how output responds when all inputs rise in the same proportion (long run): CRS same proportion, IRS more, DRS less. For Cobb-Douglas, output rises by t^(α+β), so α + β = 1, > 1 or < 1 gives CRS, IRS or DRS. The cost function gives the least cost of producing each output at given input prices and technology.

Read the full lesson

Lesson 4

Short run costs: TFC, TVC, TC, AFC, AVC, SAC and SMC

AFC = TFC/q; AVC = TVC/q; SAC = TC/q = AVC + AFC; SMC = ΔTC/Δq, which in the short run equals ΔTVC/Δq.

Short run cost schedule of an imaginary firm (₹, illustrative)
Output (q)TFC (₹)TVC (₹)TC (₹)AFC (₹)AVC (₹)SAC (₹)SMC (₹)
030030----
130124230124212
23020501510258
3302656108.6718.676
43030607.57.5154
530366667.213.26
630457557.512.59
73058884.298.2912.5713
830761063.759.513.2518

Short run cost concepts

  • Total costs
    • TFC: constant
    • TVC: rises with output
    • TC = TFC + TVC
  • Average costs
    • AFC = TFC/q
    • AVC = TVC/q
    • SAC = TC/q = AFC + AVC
  • Marginal cost
    • SMC = ΔTC/Δq = ΔTVC/Δq
    • Sum of SMCs = TVC

Key takeaways: TFC is the cost of fixed inputs and does not vary with output; TVC varies; TC = TVC + TFC. AFC, AVC and SAC are per-unit costs with SAC = AVC + AFC. SMC = ΔTC/Δq and comes wholly from TVC in the short run; the sum of SMCs equals TVC and AVC is their average.

Read the full lesson

Lesson 5

Shapes of short run cost curves and long run costs

Average curves and the SMC curve

  • SMC below the average
    • The average is falling
    • Applies to AVC and to SAC
  • SMC equal to the average
    • The average is at its minimum
    • SMC crosses it here
  • SMC above the average
    • The average is rising
    • SMC has cut it from below

Returns to scale and the LRAC curve

  1. Increasing returns to scale LRAC falls
  2. Constant returns to scale LRAC at its minimum
  3. Decreasing returns to scale LRAC rises

Marginal cost cuts average cost from below at the minimum point of the average: SMC cuts AVC and SAC, and LRMC cuts LRAC, at their lowest points.

Long run costs (illustrative)
OutputTC (₹)LRAC (₹)LRMC (₹)Phase
1505050-
2804030IRS
31053525IRS
41403535CRS
51853745DRS
62404055DRS

Key takeaways: TFC is horizontal; TVC rises from the origin; TC is TVC lifted by TFC. AFC is a falling rectangular hyperbola. SMC is U-shaped because of the law of variable proportions; AVC and SAC are U-shaped and SMC cuts each from below at its minimum, SAC's minimum lying to the right of AVC's. In the long run there are no fixed costs; IRS, CRS and DRS make LRAC U-shaped, and LRMC cuts it from below at its minimum.

Read the full lesson

Privacy · Terms · Refunds · Delivery