• Foundation
  • About 20 min
  • 5 practice questions

Total, average and marginal product and the law of variable proportions

Calculate total, average and marginal product of a variable input, state the law of variable proportions and explain it through factor proportions, and describe the shapes of the TP, MP and AP curves.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Calculate TP, AP and MP of labour from a schedule, and TP from MPs.
  • State the law of variable proportions (diminishing marginal product) and explain why it holds.
  • Describe the shapes of the TP, MP and AP curves and the relationship between MP and AP.

In the short run a firm can raise output only by adding more of the variable factor to the fixed factor. How does output respond? Three measures describe the contribution of the variable input: total, average and marginal product.

Total, average and marginal product

  • Total product (TP) of an input is the relationship between that variable input and output, keeping all other inputs constant. It is also called total return or total physical product.
  • Average product (AP) is output per unit of the variable input: APL = TPL ÷ L.
  • Marginal product (MP) is the change in output per unit change in the input, all other inputs held constant: MPL = ΔTPL ÷ ΔL. With one-unit steps, MPL = TP at L units − TP at (L − 1) units.

MP is undefined at zero input, since inputs cannot be negative. Two useful relations follow: TP is the sum of the marginal products of all units employed so far, and AP is the average of those marginal products. AP and MP are also called average and marginal returns to the variable input.

Worked example 1: computing AP and MP (illustrative)

A made-up farmer has 3 hectares of land (fixed) and varies the number of workers. Working, MP: 8 − 0 = 8; 20 − 8 = 12; 36 − 20 = 16; 48 − 36 = 12; 55 − 48 = 7; 58 − 55 = 3; 58 − 58 = 0. AP: 8/1 = 8; 20/2 = 10; 36/3 = 12; 48/4 = 12; 55/5 = 11; 58/6 ≈ 9.67; 58/7 ≈ 8.29. Check TP as the sum of MPs at 4 workers: 8 + 12 + 16 + 12 = 48. Correct.

Total, marginal and average product with land fixed (illustrative)
Workers (L)TP (quintals)MP (quintals)AP (quintals)
00--
1888
2201210
3361612
4481212
555711
65839.67
75808.29

The law of variable proportions

In the table, MP first rises (8, 12, 16) and then falls (12, 7, 3, 0). This tendency is called the law of variable proportions, or the law of diminishing marginal product: the marginal product of a factor initially rises as more of it is employed, but after a certain level of employment it starts falling.

Law of variable proportions: with other factors fixed, the marginal product of a variable factor first rises and, beyond some level of employment, falls.

Why? The key is factor proportions - the ratio in which the two inputs are combined. Holding one factor fixed and adding the other changes this ratio. At first, the land is too much for one worker to cultivate well; as workers are added, the labour-to-land ratio becomes more suitable and each extra worker adds more than the previous one, so MP rises. Beyond some point the land becomes crowded: each worker has too little land to work efficiently, and each extra worker adds less than the one before, so MP falls.

Why marginal product first rises and then falls

  1. Few workers on fixed land Land under-used; factor proportions unsuitable
  2. More workers added Proportions become more suitable; MP rises
  3. Best proportion passed Land gets crowded
  4. Still more workers Each adds less; MP falls

Shapes of the TP, MP and AP curves

With labour on the horizontal axis and output on the vertical axis: the TP curve slopes upward, rising at an increasing rate while MP rises and at a diminishing rate once MP falls. The MP curve rises and then falls, so it is inverse U-shaped. For the first unit, MP and AP are equal. While MP rises, AP also rises but by less. Even after MP starts falling, AP keeps rising as long as MP is above AP. Once MP falls below AP, AP falls too. So the AP curve is also inverse U-shaped.

MP and AP
Relationship between MP and APWhat happens to AP
MP greater than APAP rises
MP equal to APAP is at its maximum
MP less than APAP falls

It follows that the MP curve cuts the AP curve from above at the maximum point of AP. In the illustrative table, AP is highest (12) at 3 and 4 workers, and the MP of the fourth worker is also 12. To the left of this point MP is above AP; to the right it is below.

Worked example 2: from MP to TP and AP (illustrative)

The marginal products of the first five workers in a made-up workshop are 5, 9, 7, 4 and 2 units, and TP is zero with no workers. Find TP and AP. Working: TP1 = 5; TP2 = 5 + 9 = 14; TP3 = 14 + 7 = 21; TP4 = 21 + 4 = 25; TP5 = 25 + 2 = 27. AP: 5/1 = 5; 14/2 = 7; 21/3 = 7; 25/4 = 6.25; 27/5 = 5.4. AP is highest (7) at 2 and 3 workers; the third worker's MP is also 7, equal to AP, and after that MP is below AP and AP falls.

Worked example 3: from AP to TP and MP (illustrative)

AP of labour is 6, 7 and 6.5 for 1, 2 and 3 workers. Working: TP = AP × L, so TP1 = 6, TP2 = 7 × 2 = 14, TP3 = 6.5 × 3 = 19.5. MP2 = 14 − 6 = 8, MP3 = 19.5 − 14 = 5.5. AP rises from 6 to 7 while MP (8) is above it, and falls to 6.5 when MP (5.5) is below it.

Key takeaways: TP is output from the variable input with others fixed; AP = TP/L; MP = ΔTP/ΔL; TP is the sum of MPs. By the law of variable proportions, MP first rises then falls because factor proportions first improve and then become crowded. MP and AP curves are inverse U-shaped; MP cuts AP from above at AP's maximum.

Check your understanding

  1. 1. TP of labour is 30 units with 3 workers and 38 units with 4 workers (illustrative). The MP of the 4th worker is:

    1. 38 units
    2. 9.5 units
    3. 8 units
    4. 10 units
    Show answer

    Answer: C. MP4 = TP4 − TP3 = 38 − 30 = 8 units.

  2. 2. With 5 workers, TP is 60 units (illustrative). AP of labour is:

    1. 12 units
    2. 60 units
    3. 300 units
    4. 55 units
    Show answer

    Answer: A. AP = TP ÷ L = 60 ÷ 5 = 12 units per worker.

  3. 3. When MP is greater than AP, AP is:

    1. Falling
    2. At its maximum
    3. Zero
    4. Rising
    Show answer

    Answer: D. If the last unit adds more than the current average, it pulls the average up. So AP rises whenever MP is above AP.

  4. 4. Case: A made-up bakery has one oven. Adding a second and third baker raises output sharply, but the sixth baker adds very little because bakers keep waiting for the oven. This illustrates:

    1. Increasing returns to scale
    2. The law of variable proportions
    3. A change in technology
    4. The long run
    Show answer

    Answer: B. One factor (the oven) is fixed while bakers are added. MP first rises as proportions improve, then falls as the oven gets crowded - the law of variable proportions, a short-run law.

  5. 5. Assertion (A): The MP curve cuts the AP curve at the maximum point of AP. Reason (R): AP rises when MP is above it and falls when MP is below it.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. Since AP rises while MP > AP and falls while MP < AP, AP must be at its peak exactly where MP equals AP, i.e. where MP cuts AP from above. R explains A.

Sign in to keep track of the lessons you finish.

Next lesson → Returns to scale and the cost function

Privacy · Terms · Refunds · Delivery