- Foundation
- About 22 min
- 5 practice questions
Conductors and dielectrics in electrostatic fields
State the electrostatic properties of conductors - zero field inside, surface charge, field σ/ε₀ normal to the surface, equal potential, shielding - and explain how dielectrics are polarised.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain why the electrostatic field inside a conductor is zero.
- State where excess charge sits on a conductor and why the field at its surface is normal to it.
- Derive E = σ/ε₀ just outside a charged conductor.
- Explain electrostatic shielding and give everyday examples.
- Describe polarisation of polar and non-polar dielectrics and the meaning of P = ε₀χₑE.
Why is it safer to sit inside a car during lightning? Why do fuel tankers trail a metal chain? The answers lie in how conductors behave in electric fields. Insulators (dielectrics) behave very differently, and that difference is what makes capacitors work.
Electrostatics of conductors
A metal contains free electrons that move about randomly inside it like a gas, while the positive ions stay fixed. If any electric field existed inside, these electrons would drift. In the static situation (no current), they have already rearranged so that the field inside is zero. From this one fact follow all the results below.
| Result | Reason |
|---|---|
| 1. E = 0 everywhere inside a conductor | Otherwise free charges would keep moving; static means they have stopped. |
| 2. Just outside a charged conductor, E is normal to the surface | A component along the surface would push surface charges along it. |
| 3. No excess charge inside; any excess charge lives on the surface | Gauss's law: a tiny closed surface inside has E = 0 on it, so it encloses no net charge. |
| 4. The whole conductor, inside and surface, is at one potential | E = 0 inside and no tangential E on the surface, so no work is needed to move a charge anywhere in or on it. |
| 5. Just outside, E = σ/ε₀ along the outward normal | Gauss's law applied to a small pill box (below). |
| 6. A charge-free cavity has E = 0 inside (shielding) | Holds for any shape of cavity and any outside charges or fields. |
Field at the surface: E = σ/ε₀
Draw a tiny pill box (short cylinder) of cross-section δS straddling the surface, half inside and half outside. Inside the conductor E = 0, and just outside E is normal to the surface, so the only flux is through the outer face: E δS. The charge enclosed is σ δS. Gauss's law gives E δS = σ δS/ε₀, so:
E = (σ/ε₀) n̂ just outside a charged conductor, pointing outward for σ > 0 and inward for σ < 0. (Compare σ/2ε₀ for an isolated thin sheet, where the field exists on both sides.)
Worked example 1: a charged conducting sphere
A conducting sphere of radius 0.1 m carries 2 nC. All the charge is on the surface. σ = Q/(4πR²) = 2 × 10⁻⁹ ÷ (4π × 0.01) ≈ 1.59 × 10⁻⁸ C m⁻². Field just outside: σ/ε₀ = 1.59 × 10⁻⁸ ÷ 8.854 × 10⁻¹² ≈ 1.8 × 10³ N C⁻¹. Check with the point-charge form: kQ/R² = 9 × 10⁹ × 2 × 10⁻⁹ ÷ 0.01 = 1800 N C⁻¹ - the two agree.
Worked example 2: field and potential inside a hollow conductor
A hollow metal sphere of radius 0.2 m carries 4 nC. At its centre, E = 0 (result 1, and no charge in the cavity). The potential there equals the surface potential: V = kQ/R = 9 × 10⁹ × 4 × 10⁻⁹ ÷ 0.2 = 36 ÷ 0.2 = 180 V. A zero field does not mean a zero potential.
Electrostatic shielding
Whatever charges or fields are outside, the field inside a charge-free cavity in a conductor is zero, and any charge on the conductor sits on its outer surface. Sensitive instruments are therefore protected by enclosing them in metal. A car's metal body shields its passengers in the same way. Shielding works only one way: charges placed inside a cavity do produce fields outside.
- A charged comb picks up paper in dry weather; on a humid day the comb hardly charges, as moisture lets the charge leak away.
- Aircraft tyres are made slightly conducting so that charge built up by friction drains to the ground instead of sparking.
- Vehicles carrying inflammable fuel trail metal chains or ropes touching the road for the same reason.
- A bird sitting on one high-voltage wire is safe because its whole body is at one potential, so no current flows; a person on the ground touching the same wire bridges a large potential difference.
Dielectrics and polarisation
Dielectrics are insulators: they have almost no free charges. In a field, a conductor's free charges move until the field inside is cancelled completely. A dielectric cannot do that; instead its molecules respond by forming or lining up dipoles, which only reduces the field inside.
How the two kinds of dielectric molecule respond to a field
-
Non-polar molecules
- Centres of + and − charge coincide (O₂, H₂)
- No permanent dipole moment
- Field pulls + and − apart slightly
- Gains an induced dipole along E
-
Polar molecules
- Centres of charge separated (H₂O, HCl)
- Permanent dipoles, randomly oriented by thermal motion
- Field turns them partly into line
- Net dipole moment along E; alignment competes with thermal agitation
Either way the dielectric develops a net dipole moment. The dipole moment per unit volume is the polarisation P. For linear isotropic dielectrics P = ε₀χₑE, where χₑ is the electric susceptibility of the material. Inside a uniformly polarised slab, each dipole's positive end sits next to its neighbour's negative end, so there is no net charge within. But on the two faces normal to the field, unbalanced dipole ends remain: a surface charge density +σₚ on one face and −σₚ on the other. These bound charges produce a field opposite to the applied field, so the field inside the dielectric is smaller than outside. How much smaller is measured by the dielectric constant K, which we use in the next lesson.
Key takeaways
- Inside a conductor in the static state: E = 0, no excess charge, constant potential.
- At its surface: E is normal, of size σ/ε₀; excess charge resides on the surface.
- A charge-free cavity is shielded from outside fields.
- Dielectrics polarise (induced or aligned dipoles); bound surface charges reduce, but do not cancel, the field inside. P = ε₀χₑE.
Check your understanding
-
1. A solid metal sphere of radius 5 cm carries a charge of 3 nC. What is the electric field at its centre?
- Zero
- 1.08 × 10⁴ N C⁻¹
- 540 N C⁻¹
- It depends on the potential of the sphere
Show answer
Answer: A. In the static situation the field inside a conductor is zero everywhere, including at the centre; all the charge sits on the surface.
-
2. A conductor has surface charge density 8.854 × 10⁻⁹ C m⁻² at a point. The field just outside it there is
- 500 N C⁻¹
- 2000 N C⁻¹
- 1000 N C⁻¹
- Zero
Show answer
Answer: C. E = σ/ε₀ = 8.854 × 10⁻⁹ ÷ 8.854 × 10⁻¹² = 1000 N C⁻¹, directed normally outward.
-
3. Why is the electrostatic field at the surface of a charged conductor perpendicular to the surface?
- Because charges inside the conductor push outward
- Because any component along the surface would make surface charges move, which cannot happen in the static state
- Because the surface is always curved
- Because the potential just outside is zero
Show answer
Answer: B. In equilibrium no charge moves. A tangential component of E would drive the free surface charges along the surface, so it must be zero, leaving only the normal component.
-
4. In the presence of an external field, a dielectric with non-polar molecules
- stays unpolarised because its molecules have no dipole moment
- develops free charges that cancel the field completely
- becomes a conductor
- develops induced dipole moments along the field
Show answer
Answer: D. The field displaces the positive and negative charges of each non-polar molecule in opposite directions, inducing a dipole moment along E. Bound surface charges then reduce (but do not cancel) the field inside.
-
5. Assertion (A): Sensitive instruments can be protected from external electric fields by placing them inside a closed metal box. Reason (R): The electric field inside a charge-free cavity of a conductor is zero whatever the external fields.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true; this is electrostatic shielding. The cavity field is zero regardless of outside charges, which is exactly why the instrument is protected. R explains A.
Sign in to keep track of the lessons you finish.