• Foundation
  • About 20 min
  • 5 practice questions

Dipole potential, equipotential surfaces and the field-potential link

Derive the potential of a dipole, V = p cos θ/(4πε₀r²), describe equipotential surfaces for common charge arrangements, and use E = −dV/dl to get the field from the potential.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Derive the potential of an electric dipole at large distances.
  • Contrast the dipole potential with that of a single charge.
  • Define equipotential surfaces and explain why the field is normal to them.
  • Use E = −dV/dl to relate field and potential, including direction.

A map with contour lines shows hills and valleys at a glance: where contours crowd together the ground is steep. Equipotential surfaces do the same job for electric fields. This lesson finds the potential of a dipole, introduces equipotentials and shows how the field is simply the steepness of the potential.

Potential due to an electric dipole

A dipole has charges +q and −q a distance 2a apart, with dipole moment p = q × 2a from −q to +q. Take the origin at the centre and a point P at distance r, with θ the angle between the position vector and p. Let r₁ and r₂ be the distances of P from +q and −q.

  1. By superposition, V = (q/4πε₀)(1/r₁ − 1/r₂).
  2. From the geometry, r₁² = r² + a² − 2ar cos θ and r₂² = r² + a² + 2ar cos θ.
  3. For r ≫ a, keep terms only to first order in a/r: r₁² ≈ r²(1 − 2a cos θ/r), so 1/r₁ ≈ (1/r)(1 + a cos θ/r) by the binomial approximation. Similarly 1/r₂ ≈ (1/r)(1 − a cos θ/r).
  4. Subtracting: 1/r₁ − 1/r₂ ≈ 2a cos θ/r².
  5. So V = q × 2a cos θ/(4πε₀r²) = p cos θ/(4πε₀r²).

V = (1/4πε₀) p cos θ / r² = (1/4πε₀) p · r̂ / r² (r ≫ a; exact for a point dipole).

  • On the axis (θ = 0° or 180°): V = ±p/(4πε₀r²), positive on the side of +q.
  • On the equatorial plane (θ = 90°): V = 0 everywhere.
  • The potential depends on the angle θ as well as on r (it is the same all round a cone about p).
  • It falls off as 1/r², not as 1/r like a single charge.

Worked example 1: dipole potential

A short dipole has p = 2 × 10⁻¹⁰ C m. At r = 0.1 m on its axis, V = kp/r² = 9 × 10⁹ × 2 × 10⁻¹⁰ ÷ 0.01 = 1.8 ÷ 0.01 = 180 V. At the same distance but θ = 60°, V = 180 × cos 60° = 90 V. On the equatorial line, V = 0 - yet the field there is not zero (it is kp/r³ = 1800 V m⁻¹, opposite to p).

Equipotential surfaces

An equipotential surface is a surface on which the potential has the same value at every point. Moving a charge along such a surface needs no work. Some common cases:

Equipotential surfaces of common charge arrangements

  • Single point charge
    • Concentric spheres centred on the charge
    • Field lines are radial, crossing each sphere at right angles
  • Uniform field
    • Parallel planes perpendicular to the field
    • Equal steps of V are equally spaced
  • Electric dipole
    • Closed surfaces round each charge, distorted near the other
    • The equatorial plane is the V = 0 surface
  • Two equal positive charges
    • Separate surfaces round each charge close in
    • Merge into single surfaces round both far away

Why the field is normal to an equipotential surface. If E had a component along the surface, moving a test charge along the surface against that component would need work, which would mean a potential difference between two points of the surface - contradicting its definition. So at every point E is perpendicular to the equipotential surface through it. Field lines and equipotentials always cross at right angles.

Relation between field and potential

Take two close equipotential surfaces with potentials V and V + δV, separated by a perpendicular distance δl, with δV the change in the direction of E. Move a unit positive charge from the second surface to the first, against the field. The work done is |E| δl, and it equals the potential difference V − (V + δV) = −δV. Therefore:

|E| = −δV/δl = |δV|/δl. The field points in the direction in which the potential decreases most steeply, and its size is the potential change per unit distance normal to the equipotential surface.

For a uniform field this reduces to E = V/d, where V is the potential difference between two planes a distance d apart along the field. It also explains the alternative unit V m⁻¹ for electric field. Where equipotentials (drawn at equal steps of V) crowd together, the field is strong; where they spread out, it is weak. Around a point charge the spheres for equal steps of V get farther apart as r increases, because the field weakens.

Reading the field from the potential

  1. Find the equipotentials Surfaces of equal V around the charges.
  2. Direction E is perpendicular to them, pointing from higher to lower V.
  3. Magnitude E = (change in V) ÷ (perpendicular gap) between neighbouring surfaces.

Worked example 2: field from potential

(a) Two parallel plates 4 mm apart have a potential difference of 120 V. E = V/d = 120 ÷ 0.004 = 3 × 10⁴ V m⁻¹, directed from the higher-potential plate to the lower. (b) Along the x-axis the potential falls steadily from 50 V at x = 0 to 20 V at x = 0.1 m. E = −δV/δx = −(20 − 50) ÷ 0.1 = 300 V m⁻¹, pointing along +x, the direction of falling potential.

Worked example 3: sign of work in a field

A uniform field of 200 V m⁻¹ points along +x. How much work does an external agent do in moving a +3 μC charge from x = 0.5 m back to x = 0.2 m? Moving against the field raises the potential by E × distance = 200 × 0.3 = 60 V. Work = qΔV = 3 × 10⁻⁶ × 60 = 1.8 × 10⁻⁴ J, positive because the charge is pushed against the field. Moving it at right angles to the field (along an equipotential plane) would need no work.

Key takeaways

  • Dipole: V = p cos θ/(4πε₀r²); zero on the equatorial plane; falls as 1/r².
  • Equipotential surfaces: spheres for a point charge, parallel planes for a uniform field.
  • E is always normal to equipotentials and points towards decreasing V.
  • |E| = |δV|/δl; for a uniform field E = V/d.

Check your understanding

  1. 1. What is the electric potential at any point on the equatorial line of a short dipole?

    1. p/(4πε₀r²)
    2. Zero
    3. 2p/(4πε₀r²)
    4. p/(4πε₀r³)
    Show answer

    Answer: B. V = p cos θ/(4πε₀r²) and on the equatorial line θ = 90°, so cos θ = 0 and V = 0. The field there is not zero, however.

  2. 2. At large distance r from a dipole, the potential varies as

    1. 1/r
    2. 1/r³
    3. 1/r²
    4. r
    Show answer

    Answer: C. The dipole potential p cos θ/(4πε₀r²) is proportional to 1/r², faster than the 1/r of a single charge, because the two charges' potentials nearly cancel far away.

  3. 3. The potential difference between two large parallel plates 5 mm apart is 250 V. What is the field between them?

    1. 5 × 10⁴ V m⁻¹
    2. 1.25 V m⁻¹
    3. 5 × 10² V m⁻¹
    4. 1.25 × 10³ V m⁻¹
    Show answer

    Answer: A. E = V/d = 250 ÷ 0.005 = 5 × 10⁴ V m⁻¹.

  4. 4. How much work is done in moving a 2 μC charge through 5 cm along an equipotential surface at 100 V?

    1. 2 × 10⁻⁴ J
    2. 1 × 10⁻⁵ J
    3. 4 × 10⁻⁵ J
    4. Zero
    Show answer

    Answer: D. On an equipotential surface the potential difference between any two points is zero, so W = qΔV = 0, however far the charge is moved along it.

  5. 5. Assertion (A): Electric field lines cross equipotential surfaces at right angles. Reason (R): No work is done in moving a test charge between two points on the same equipotential surface.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. If the field had a component along the surface, moving a charge along it would need work, contradicting R. So R is the reason the field must be normal to the surface.

Privacy · Terms · Refunds · Delivery