- Foundation
- About 20 min
- 5 practice questions
Electrostatic potential and the potential of point charges
Define electrostatic potential energy and potential through work done against the field, derive V = Q/(4πε₀r) for a point charge, and add potentials of several charges as scalars.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain why the electrostatic force is conservative and what that allows us to define.
- Define potential energy difference, potential and potential difference, with the zero at infinity.
- Derive the potential of a point charge and compare its fall-off with that of the field.
- Find the potential of a group of charges and of a charged spherical shell.
Lift a book and the work you do is stored as gravitational potential energy; let go and it turns back into kinetic energy. The Coulomb force behaves the same way: like gravity it is an inverse-square, conservative force. That lets us describe electric situations with energy - a scalar - instead of vector forces, which often makes problems much simpler.
Potential energy difference
Take a positive source charge Q held fixed and move a small positive test charge q from a point R to a point P closer to Q. The repulsion opposes the motion, so an external agent must push. If the agent's force is always just equal and opposite to the electric force, the charge moves without accelerating and all the work done is stored as potential energy:
U_P − U_R = W_RP, the work done by an external force in moving q from R to P without acceleration. (The work done by the field itself is −W_RP.)
- The work depends only on the end points, not on the path. This path independence is what makes the electrostatic force conservative; without it potential energy would have no meaning.
- Only differences of potential energy matter. Adding the same constant everywhere changes nothing, so we are free to choose where U = 0. The usual choice is U = 0 at infinity.
- With that choice, the potential energy of q at P is the work done by an external force in bringing q from infinity to P.
Electrostatic potential
The work above is proportional to q, because the force is qE. Dividing by q gives a quantity that depends only on the charges creating the field and on the position - the electrostatic potential V.
V_P − V_R = W_RP / q. The potential at a point is the work done by an external force in bringing a unit positive charge, without acceleration, from infinity to that point. SI unit: volt (1 V = 1 J C⁻¹).
The volt is named after Alessandro Volta, who built the first battery (the voltaic pile) from discs of two metals separated by moist cardboard.
Potential due to a point charge
Place Q at the origin and bring a unit positive charge in from infinity along a radius to a point P at distance r. Since work is path independent, the radial path is allowed and simplest.
- At distance r′ the field of Q pushes the unit charge outward with force Q/(4πε₀r′²).
- The external force must be equal and opposite, so the work it does over a small step dr′ (moving inward, so dr′ < 0) is dW = −Q/(4πε₀r′²) dr′.
- Adding all steps from r′ = ∞ to r′ = r: W = −∫ Q/(4πε₀r′²) dr′ = Q/(4πε₀r′) evaluated from ∞ to r = Q/(4πε₀r).
- This work per unit charge is the potential at P.
V(r) = (1/4πε₀) Q/r = kQ/r. V is positive near a positive charge and negative near a negative charge, and zero at infinity.
Notice the difference from the field: V falls off as 1/r while E falls off as 1/r². Potential is a scalar with a sign; field is a vector with a direction.
Field and potential of a point charge
-
Electric field E
- Vector
- E = kQ/r²
- Falls off as 1/r²
- Unit N C⁻¹ or V m⁻¹
- Fields of many charges add as vectors
-
Potential V
- Scalar (with sign)
- V = kQ/r
- Falls off as 1/r
- Unit volt (J C⁻¹)
- Potentials of many charges add algebraically
Worked example 1: potential and work
Find the potential 20 cm from a +3 nC charge, and the work needed to bring a +2 μC charge there from infinity. V = kQ/r = 9 × 10⁹ × 3 × 10⁻⁹ ÷ 0.2 = 27 ÷ 0.2 = 135 V. Work W = qV = 2 × 10⁻⁶ × 135 = 2.7 × 10⁻⁴ J. The path taken does not matter.
Potential due to a system of charges
Because fields obey superposition, so do potentials - but potentials add as ordinary signed numbers, which is easier than adding vectors:
V = k (q₁/r₁ + q₂/r₂ + ... + qₙ/rₙ), where rᵢ is the distance of the point from charge qᵢ.
For a continuous charge distribution, divide it into small elements, find the potential of each as a point charge and sum (integrate). A uniformly charged thin spherical shell of radius R and charge q gives V = kq/r outside (as if the charge were at the centre). Inside, the field is zero, so no work is needed to move a charge around: the potential is constant and equal to its surface value, kq/R.
Worked example 2: where is the potential zero?
Charges +4 nC and −1 nC are 30 cm apart. Measure x (in cm) from the positive charge towards the negative one. The potentials cancel when 4/x = 1/(distance from −1 nC).
- Between the charges: 4/x = 1/(30 − x), so 120 − 4x = x and x = 24 cm.
- Beyond the negative charge: 4/x = 1/(x − 30), so 4x − 120 = x and x = 40 cm.
- On the far side of the positive charge the larger positive charge is always nearer, so V cannot vanish there.
So V = 0 at 24 cm and 40 cm from the positive charge, both on the side of the negative charge. Note that the field is not zero at these points - zero potential does not mean zero field.
Worked example 3: four charges and a shell
(a) Four charges of +1 μC sit at the corners of a square whose centre is 0.1 m from each corner. V at the centre = 4 × 9 × 10⁹ × 1 × 10⁻⁶ ÷ 0.1 = 3.6 × 10⁵ V, while the field there is zero by symmetry. (b) A thin shell of radius 0.1 m holds 1 nC. Surface potential = 9 × 10⁹ × 10⁻⁹ ÷ 0.1 = 90 V; the potential everywhere inside is also 90 V; at 0.3 m from the centre it is 9 ÷ 0.3 = 30 V.
Key takeaways
- Electrostatic work is path independent, so potential energy and potential can be defined; only differences matter.
- V at a point = work per unit positive charge brought from infinity; unit volt = J C⁻¹.
- Point charge: V = kQ/r (∝ 1/r), signed. Several charges: add potentials algebraically.
- Spherical shell: kq/r outside, constant kq/R inside.
Check your understanding
-
1. What is the potential at a distance of 6 cm from a point charge of 2 × 10⁻⁷ C?
- 3 × 10³ V
- 3 × 10⁵ V
- 1.08 × 10⁴ V
- 3 × 10⁴ V
Show answer
Answer: D. V = kQ/r = 9 × 10⁹ × 2 × 10⁻⁷ ÷ 0.06 = 1800 ÷ 0.06 = 3 × 10⁴ V.
-
2. How much work is needed to carry a charge of 5 μC from a point at 20 V to a point at 120 V?
- 5 × 10⁻⁴ J
- 6 × 10⁻⁴ J
- 1 × 10⁻⁴ J
- 5 × 10⁻⁶ J
Show answer
Answer: A. W = q(V_final − V_initial) = 5 × 10⁻⁶ × (120 − 20) = 5 × 10⁻⁶ × 100 = 5 × 10⁻⁴ J.
-
3. The potential at distance r from a point charge is V and the field is E. At distance 2r they become
- V/2 and E/2
- V/2 and E/4
- V/4 and E/2
- V/4 and E/4
Show answer
Answer: B. V ∝ 1/r, so it halves; E ∝ 1/r², so it becomes a quarter.
-
4. A thin spherical shell of radius 10 cm carries 2 nC. What is the potential at a point 4 cm from its centre?
- 450 V
- Zero
- 180 V
- 1125 V
Show answer
Answer: C. Inside a shell the potential equals the surface value: V = kq/R = 9 × 10⁹ × 2 × 10⁻⁹ ÷ 0.1 = 18 ÷ 0.1 = 180 V. It is the field, not the potential, that is zero inside.
-
5. Assertion (A): The work done by the electrostatic field in taking a charge between two points does not depend on the path. Reason (R): The electrostatic force is a conservative force.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true, and path independence of work is exactly the defining property of a conservative force. So R correctly explains A.
Sign in to keep track of the lessons you finish.