Revision notes

Chapter 2 Electrostatic Potential and Capacitance: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Electrostatic potential and the potential of point charges

U_P − U_R = W_RP, the work done by an external force in moving q from R to P without acceleration. (The work done by the field itself is −W_RP.)

V_P − V_R = W_RP / q. The potential at a point is the work done by an external force in bringing a unit positive charge, without acceleration, from infinity to that point. SI unit: volt (1 V = 1 J C⁻¹).

V(r) = (1/4πε₀) Q/r = kQ/r. V is positive near a positive charge and negative near a negative charge, and zero at infinity.

Field and potential of a point charge

  • Electric field E
    • Vector
    • E = kQ/r²
    • Falls off as 1/r²
    • Unit N C⁻¹ or V m⁻¹
    • Fields of many charges add as vectors
  • Potential V
    • Scalar (with sign)
    • V = kQ/r
    • Falls off as 1/r
    • Unit volt (J C⁻¹)
    • Potentials of many charges add algebraically

V = k (q₁/r₁ + q₂/r₂ + ... + qₙ/rₙ), where rᵢ is the distance of the point from charge qᵢ.

  • Electrostatic work is path independent, so potential energy and potential can be defined; only differences matter.
  • V at a point = work per unit positive charge brought from infinity; unit volt = J C⁻¹.
  • Point charge: V = kQ/r (∝ 1/r), signed. Several charges: add potentials algebraically.
  • Spherical shell: kq/r outside, constant kq/R inside.
Read the full lesson

Lesson 2

Dipole potential, equipotential surfaces and the field-potential link

V = (1/4πε₀) p cos θ / r² = (1/4πε₀) p · r̂ / r² (r ≫ a; exact for a point dipole).

Equipotential surfaces of common charge arrangements

  • Single point charge
    • Concentric spheres centred on the charge
    • Field lines are radial, crossing each sphere at right angles
  • Uniform field
    • Parallel planes perpendicular to the field
    • Equal steps of V are equally spaced
  • Electric dipole
    • Closed surfaces round each charge, distorted near the other
    • The equatorial plane is the V = 0 surface
  • Two equal positive charges
    • Separate surfaces round each charge close in
    • Merge into single surfaces round both far away

|E| = −δV/δl = |δV|/δl. The field points in the direction in which the potential decreases most steeply, and its size is the potential change per unit distance normal to the equipotential surface.

Reading the field from the potential

  1. Find the equipotentials Surfaces of equal V around the charges.
  2. Direction E is perpendicular to them, pointing from higher to lower V.
  3. Magnitude E = (change in V) ÷ (perpendicular gap) between neighbouring surfaces.
  • Dipole: V = p cos θ/(4πε₀r²); zero on the equatorial plane; falls as 1/r².
  • Equipotential surfaces: spheres for a point charge, parallel planes for a uniform field.
  • E is always normal to equipotentials and points towards decreasing V.
  • |E| = |δV|/δl; for a uniform field E = V/d.
Read the full lesson

Lesson 3

Potential energy of charge systems and of a dipole in a field

U = (1/4πε₀) q₁q₂ / r₁₂. For three charges: U = k (q₁q₂/r₁₂ + q₁q₃/r₁₃ + q₂q₃/r₂₃) - one term for every pair.

Potential energy of q in an external field = qV(r). For two charges in an external field: U = q₁V(r₁) + q₂V(r₂) + kq₁q₂/r₁₂.

U(θ) = −pE cos θ = −p · E. Work to rotate a dipole from θ₀ to θ₁: W = pE (cos θ₀ − cos θ₁).

Energy of a dipole at key angles
OrientationθU = −pE cos θEquilibrium
Along the field0°−pE (minimum)Stable
Perpendicular90°0Not in equilibrium (torque is maximum, pE)
Against the field180°+pE (maximum)Unstable

A dipole released in a uniform field

  1. Released at an angle Torque turns p towards E.
  2. Swings through alignment Potential energy has become rotational kinetic energy.
  3. Overshoots and slows Torque now acts back towards E.
  4. Turns back It oscillates about E; with friction or other losses it settles along E.

Then back to step 1: Released at an angle

  • U of a charge system = sum over all pairs of kqᵢqⱼ/rᵢⱼ; positive for like, negative for unlike pairs.
  • In an external field: U = qV(r); for two charges add the mutual term.
  • 1 eV = 1.6 × 10⁻¹⁹ J.
  • Dipole: U = −pE cos θ; minimum along E (stable), maximum opposite to E (unstable).
Read the full lesson

Lesson 4

Conductors and dielectrics in electrostatic fields

Electrostatic properties of a conductor
ResultReason
1. E = 0 everywhere inside a conductorOtherwise free charges would keep moving; static means they have stopped.
2. Just outside a charged conductor, E is normal to the surfaceA component along the surface would push surface charges along it.
3. No excess charge inside; any excess charge lives on the surfaceGauss's law: a tiny closed surface inside has E = 0 on it, so it encloses no net charge.
4. The whole conductor, inside and surface, is at one potentialE = 0 inside and no tangential E on the surface, so no work is needed to move a charge anywhere in or on it.
5. Just outside, E = σ/ε₀ along the outward normalGauss's law applied to a small pill box (below).
6. A charge-free cavity has E = 0 inside (shielding)Holds for any shape of cavity and any outside charges or fields.

E = (σ/ε₀) n̂ just outside a charged conductor, pointing outward for σ > 0 and inward for σ < 0. (Compare σ/2ε₀ for an isolated thin sheet, where the field exists on both sides.)

How the two kinds of dielectric molecule respond to a field

  • Non-polar molecules
    • Centres of + and − charge coincide (O₂, H₂)
    • No permanent dipole moment
    • Field pulls + and − apart slightly
    • Gains an induced dipole along E
  • Polar molecules
    • Centres of charge separated (H₂O, HCl)
    • Permanent dipoles, randomly oriented by thermal motion
    • Field turns them partly into line
    • Net dipole moment along E; alignment competes with thermal agitation
  • Inside a conductor in the static state: E = 0, no excess charge, constant potential.
  • At its surface: E is normal, of size σ/ε₀; excess charge resides on the surface.
  • A charge-free cavity is shielded from outside fields.
  • Dielectrics polarise (induced or aligned dipoles); bound surface charges reduce, but do not cancel, the field inside. P = ε₀χₑE.
Read the full lesson

Lesson 5

Capacitors: capacitance, dielectrics, combinations and energy

C = Q/V. SI unit: farad, 1 F = 1 C V⁻¹. Practical units: 1 μF = 10⁻⁶ F, 1 nF = 10⁻⁹ F, 1 pF = 10⁻¹² F.

C = ε₀A/d (vacuum). With a dielectric filling the gap: C = Kε₀A/d = KC₀, where K = ε/ε₀ is the dielectric constant (K > 1) and ε = Kε₀ is the permittivity of the medium.

Series and parallel combinations

  • Series
    • Same charge Q on each
    • Voltages add: V = V₁ + V₂ + ...
    • 1/C = 1/C₁ + 1/C₂ + ...
    • C is smaller than the smallest one
    • Larger share of V across the smaller C
  • Parallel
    • Same voltage V across each
    • Charges add: Q = Q₁ + Q₂ + ...
    • C = C₁ + C₂ + ...
    • C is larger than the largest one
    • Larger share of Q on the larger C

U = Q²/(2C) = ½CV² = ½QV. Energy density of an electric field: u = ½ε₀E² (energy per unit volume).

Effect of inserting a dielectric
Dielectric (K) inserted fullyBattery kept connected (V fixed)Battery removed first (Q fixed)
CapacitanceBecomes KC₀Becomes KC₀
ChargeRises to KQ₀Stays Q₀
VoltageStays V₀Falls to V₀/K
Field between platesStays V₀/dFalls to E₀/K
EnergyRises to KU₀Falls to U₀/K
  • C = Q/V, in farads; it depends on geometry and the dielectric only.
  • Parallel plates: C = ε₀A/d, and C = KC₀ with a dielectric of constant K.
  • Series: 1/C = Σ 1/Cᵢ (same Q). Parallel: C = Σ Cᵢ (same V).
  • U = Q²/2C = ½CV² = ½QV; energy density ½ε₀E².
Read the full lesson

Privacy · Terms · Refunds · Delivery