Revision notes

Chapter 6 Electromagnetic Induction: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Faraday's experiments, magnetic flux and Faraday's law

Three experiments that revealed induction

  • Magnet and coil
    • Coil connected to a galvanometer
    • Magnet pushed in: deflection; pulled out: opposite deflection
    • No deflection while the magnet is still
    • Faster motion gives a larger deflection
    • Moving the coil instead gives the same effects
  • Two coils
    • Second coil carries a steady current from a battery
    • Moving either coil relative to the other induces a current
    • Reversing the motion reverses the current
  • Two coils at rest
    • Pressing a key in the second coil's circuit: brief deflection
    • Key held down (steady current): no deflection
    • Releasing the key: brief opposite deflection
    • An iron rod through the coils greatly increases the effect

Φ_B = B · A = BA cos θ, where θ is the angle between B and the normal to the area. For non-uniform fields or curved surfaces, Φ_B = Σ Bᵢ · dAᵢ. Unit: weber (Wb) = T m². Flux is a scalar.

The magnitude of the emf induced in a circuit equals the time rate of change of magnetic flux through it: ε = −dΦ_B/dt. For a closely wound coil of N turns: ε = −N dΦ_B/dt.

From a change to an induced current

  1. Something changes B, the area A, or the angle θ.
  2. Flux changes Φ = BA cos θ through each turn.
  3. Emf induced ε = −N dΦ/dt.
  4. Current in a closed circuit I = ε/R.
  • An emf is induced whenever the magnetic flux through a circuit changes - by motion or by a changing current.
  • Φ = BA cos θ, in webers; ε = −N dΦ/dt.
  • The flux can be changed through B, A or θ; a constant flux induces nothing, however strong.
Read the full lesson

Lesson 2

Lenz's law and conservation of energy

The polarity of the induced emf is such that it tends to produce a current which opposes the change in magnetic flux that produced it. This is the meaning of the minus sign in ε = −dΦ/dt.

Applying Lenz's law

  1. Find the external field Its direction through the loop.
  2. Is the flux increasing or decreasing? Because of motion, a changing current, or a changing area.
  3. Choose the induced field Opposite to the external field if the flux increases; along it if the flux decreases.
  4. Find the current Use the right-hand thumb rule: thumb along the induced field, fingers give the current.
A loop crossing a field region (field into the page, viewed from the front)
StageFlux (into page)Induced current
Entering the fieldIncreasingAnticlockwise (its field points out of the page)
Wholly inside the fieldConstantNone
Leaving the fieldDecreasingClockwise (its field points into the page)
Wholly outside the fieldZero, constantNone
  • Induced current opposes the change in flux that causes it (the minus sign in Faraday's law).
  • Approaching pole is repelled; receding pole is attracted - the coil always resists the motion.
  • Lenz's law is required by conservation of energy: the work done against it becomes heat.
  • No current while a loop is wholly inside a uniform field or wholly outside it.
Read the full lesson

Lesson 3

Motional emf

ε = −dΦ/dt = −Bl dx/dt = Blv (in magnitude), when the rod, its velocity and the field are mutually perpendicular. This is the motional emf.

Two views of the motional emf

  • Faraday's law view
    • The circuit's area changes
    • Flux Φ = Blx changes at rate Blv
    • ε = dΦ/dt = Blv
  • Lorentz force view
    • Charges move with the rod through B
    • Each feels qvB along the rod
    • Work per unit charge = vBl = ε

ε = ∫ Bωr dr = ½BωR² between the centre and the rim. With ω = 2πν: ε = πνBR².

Motional emf in different set-ups

  • Straight rod moving sideways
    • ε = Blv
    • l, v and B mutually perpendicular
  • Rod rotating about one end
    • ε = ½BωR²
    • Speed grows along the rod
  • Wheel with many spokes
    • Spokes in parallel
    • Emf same as one spoke
  • Rod moving along its own length or parallel to B
    • No emf: no flux cut
  • A conductor moving across a field: ε = Blv (all three perpendicular).
  • Faraday's law and the Lorentz force give the same motional emf.
  • Rotating rod about one end: ε = ½BωR².
  • A changing magnetic field produces an electric field that can drive charges round a loop.
Read the full lesson

Lesson 4

Mutual inductance, self-inductance and magnetic energy

M₁₂ = M₂₁ = M = μ₀n₁n₂πr₁²l for coaxial solenoids (μrμ₀n₁n₂πr₁²l with a core of relative permeability μr). Induced emf in coil 1: ε₁ = −M dI₂/dt.

ε = −L dI/dt. For a long solenoid of n turns per unit length, cross-section A and length l: L = μ₀n²Al (μrμ₀n²Al with a core).

Self-inductance and mass

  • Inductance L
    • Opposes change of current
    • Back emf L dI/dt
    • Stored energy ½LI²
    • Electrical inertia
  • Mass m
    • Opposes change of velocity
    • Force m dv/dt
    • Kinetic energy ½mv²
    • Mechanical inertia

U = ½LI². For a solenoid, using L = μ₀n²Al and B = μ₀nI: U = (B²/2μ₀) Al, so the magnetic energy density is u_B = B²/(2μ₀).

  • Inductance = flux linkage per unit current (henry).
  • Coaxial solenoids: M = μ₀n₁n₂πr₁²l; M₁₂ = M₂₁; ε₁ = −M dI₂/dt.
  • Solenoid: L = μ₀n²Al (× μr with a core); back emf ε = −L dI/dt.
  • Energy ½LI²; magnetic energy density B²/2μ₀.
Read the full lesson

Lesson 5

The ac generator

ε = ε₀ sin ωt, with peak emf ε₀ = NBAω. Since ω = 2πν: ε = ε₀ sin 2πνt, where ν is the frequency of rotation.

Flux and emf through one turn of the coil
Angle θ = ωtFlux BA cos θEmf NBAω sin θ
0°Maximum (+BA)Zero
90°ZeroMaximum (+ε₀)
180°Maximum (−BA)Zero
270°ZeroMaximum (−ε₀)

One rotation of a generator coil

  1. θ = 0° Coil faces the field: flux maximum, emf zero.
  2. θ = 90° Coil edge-on to the field: flux zero, emf +ε₀.
  3. θ = 180° Faces the field again (reversed): flux maximum, emf zero.
  4. θ = 270° Edge-on again: flux zero, emf −ε₀.

Then back to step 1: θ = 0°

  • An ac generator turns mechanical energy into electrical energy by rotating a coil in a field.
  • ε = NBAω sin ωt; peak ε₀ = NBAω = NBA × 2πν.
  • Emf is zero when the flux is maximum, and maximum when the flux is zero.
  • Mains frequency in India is 50 Hz; generators are driven by water, steam from fuel, or nuclear heat.
Read the full lesson

Privacy · Terms · Refunds · Delivery