• Foundation
  • About 18 min
  • 5 practice questions

The ac generator

Explain how a coil rotating in a magnetic field produces an alternating emf ε = NBAω sin ωt, find its peak value and instantaneous values, and describe how commercial generators are driven.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe the parts of a simple ac generator and the role of slip rings and brushes.
  • Derive ε = NBAω sin ωt from Faraday's law.
  • Explain when the emf is maximum and when it is zero.
  • Calculate peak and instantaneous emfs, and describe hydro-electric, thermal and nuclear generators.

Almost all the electricity we use is produced by generators that turn mechanical energy into electrical energy by electromagnetic induction. Rotating a coil in a magnetic field keeps changing the angle between the field and the coil's area, and so keeps changing the flux. The development of the practical ac machine is credited to Nikola Tesla.

Construction

  • Armature: a coil of N turns and area A mounted on a shaft (rotor).
  • Field: a uniform magnetic field B perpendicular to the axis of rotation.
  • Slip rings and brushes: the ends of the coil connect to rings turning with the shaft; fixed brushes pressing on the rings take the current to the external circuit.
  • Drive: some external agent turns the shaft at a steady angular speed ω.

The alternating emf

Let the angle between B and the coil's area vector be θ = ωt (θ = 0 at t = 0, when the coil faces the field squarely). The flux through each turn is Φ = BA cos ωt, so by Faraday's law:

  1. ε = −N dΦ/dt = −NBA d(cos ωt)/dt.
  2. d(cos ωt)/dt = −ω sin ωt.
  3. So ε = NBAω sin ωt.

ε = ε₀ sin ωt, with peak emf ε₀ = NBAω. Since ω = 2πν: ε = ε₀ sin 2πνt, where ν is the frequency of rotation.

The emf swings between +ε₀ and −ε₀, reversing its polarity twice per turn, so the current it drives is alternating current (ac). The emf is zero when the coil faces the field squarely (θ = 0°, 180°): the flux is then greatest but momentarily not changing. It is greatest when the coil's plane lies along the field (θ = 90°, 270°): the flux is then zero but changing fastest.

Flux and emf through one turn of the coil
Angle θ = ωtFlux BA cos θEmf NBAω sin θ
0°Maximum (+BA)Zero
90°ZeroMaximum (+ε₀)
180°Maximum (−BA)Zero
270°ZeroMaximum (−ε₀)

One rotation of a generator coil

  1. θ = 0° Coil faces the field: flux maximum, emf zero.
  2. θ = 90° Coil edge-on to the field: flux zero, emf +ε₀.
  3. θ = 180° Faces the field again (reversed): flux maximum, emf zero.
  4. θ = 270° Edge-on again: flux zero, emf −ε₀.

Then back to step 1: θ = 0°

Commercial generators

Large generators produce hundreds of megawatts. In most of them the coils are held still and electromagnets rotate, but the principle is the same. The energy to turn them comes from falling water (hydro-electric generators), from high-pressure steam made by burning coal or other fuels (thermal generators), or from steam heated by nuclear fuel (nuclear power generators). In India the frequency of the mains supply is 50 Hz; some other countries use 60 Hz.

Worked example 1: peak and instantaneous emf

A coil of 50 turns and area 0.02 m² rotates at 50 revolutions per second in a field of 0.3 T. ω = 2π × 50 ≈ 314 rad s⁻¹. Peak emf ε₀ = NBAω = 50 × 0.3 × 0.02 × 314 ≈ 94 V. At t = 1/600 s, ωt = 2π × 50 ÷ 600 = π/6, so ε = 94 × sin 30° ≈ 47 V. The emf first reaches its peak at ωt = π/2, that is, t = 1/200 s = 5 ms.

Worked example 2: designing for a peak voltage

What field is needed for a 100-turn coil of area 0.05 m², turning at 50 Hz, to give a peak emf of 300 V? B = ε₀/(NAω) = 300 ÷ (100 × 0.05 × 314) = 300 ÷ 1570 ≈ 0.19 T. Doubling the speed of rotation would double both the peak emf and the frequency.

Worked example 3: a pedal-powered generator

A coil of 80 turns and area 0.05 m² is turned by bicycle pedals at one revolution per second in a field of 0.02 T. ε₀ = NBA × 2πν = 80 × 0.02 × 0.05 × 2π × 1 ≈ 0.50 V - small, which is why practical generators use strong fields, many turns and high speeds.

Key takeaways

  • An ac generator turns mechanical energy into electrical energy by rotating a coil in a field.
  • ε = NBAω sin ωt; peak ε₀ = NBAω = NBA × 2πν.
  • Emf is zero when the flux is maximum, and maximum when the flux is zero.
  • Mains frequency in India is 50 Hz; generators are driven by water, steam from fuel, or nuclear heat.

Check your understanding

  1. 1. In an ac generator, the emf is maximum when the plane of the coil is

    1. perpendicular to the magnetic field
    2. at 45° to the field
    3. parallel to the magnetic field
    4. moving along the field
    Show answer

    Answer: C. When the coil's plane lies along the field (θ = 90° between B and the area vector), the flux is zero but changing fastest, so ε = NBAω sin 90° is maximum.

  2. 2. A coil of 60 turns and area 0.2 m² rotates at 0.5 revolutions per second in a field of 0.02 T. What is the peak emf?

    1. 0.754 V
    2. 0.12 V
    3. 7.54 V
    4. 0.0754 V
    Show answer

    Answer: A. ε₀ = NBA × 2πν = 60 × 0.02 × 0.2 × 2π × 0.5 = 0.24 × 3.14 ≈ 0.754 V.

  3. 3. If the speed of rotation of a generator coil is doubled, keeping everything else the same, the peak emf and frequency become

    1. the same emf, double frequency
    2. double emf, same frequency
    3. half emf, double frequency
    4. double emf, double frequency
    Show answer

    Answer: D. ε₀ = NBAω is proportional to ω, and the frequency is ω/2π, so both double.

  4. 4. A generator's emf is ε = 200 sin 100πt volts. What is the frequency of the ac it produces?

    1. 100 Hz
    2. 50 Hz
    3. 200 Hz
    4. 314 Hz
    Show answer

    Answer: B. Comparing with ε₀ sin 2πνt: 2πν = 100π, so ν = 50 Hz.

  5. 5. Assertion (A): The emf of a rotating generator coil is zero at the instant when the flux through it is maximum. Reason (R): The induced emf depends on the rate of change of flux, which is zero when the flux is at its maximum.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. Φ = BA cos ωt is maximum when sin ωt = 0, and at that instant dΦ/dt = −BAω sin ωt = 0, so the emf is zero. R explains A.

Privacy · Terms · Refunds · Delivery