- Foundation
- About 20 min
- 5 practice questions
Motional emf
Derive the motional emf ε = Blv from Faraday's law and from the Lorentz force, find the emf of a rod rotating in a field, ε = ½BωR², and see why a changing magnetic field must create an electric field.
If something looks wrong, please tell us.
By the end of this lesson you can
- Derive ε = Blv for a rod sliding on rails in a uniform field.
- Explain the same result using the Lorentz force on charges in the rod.
- Derive ε = ½BωR² for a rod rotating about one end.
- Explain why an emf in a stationary loop implies an induced electric field.
Fly a metal aircraft through the earth's magnetic field and a small voltage appears across its wingtips. Move any conductor across a magnetic field and the same thing happens. This motional emf is the simplest kind of induction to picture.
A rod sliding on rails
A U-shaped conductor lies in a uniform field B perpendicular to its plane. A straight rod PQ of length l slides along it at constant speed v, completing a rectangle whose length x changes. The flux through the circuit is Φ = Blx. Using Faraday's law:
ε = −dΦ/dt = −Bl dx/dt = Blv (in magnitude), when the rod, its velocity and the field are mutually perpendicular. This is the motional emf.
The same result from the Lorentz force
A charge q in the rod moves with the rod at velocity v through the field, so it feels a Lorentz force qvB along the rod. Every free charge in the rod feels the same force, wherever it is. The work done on q in moving it the full length l is W = qvBl, and emf is work per unit charge, so ε = W/q = Blv. The two explanations agree.
Two views of the motional emf
-
Faraday's law view
- The circuit's area changes
- Flux Φ = Blx changes at rate Blv
- ε = dΦ/dt = Blv
-
Lorentz force view
- Charges move with the rod through B
- Each feels qvB along the rod
- Work per unit charge = vBl = ε
Induced electric fields
The Lorentz picture explains motional emf, but what about a stationary loop in a changing magnetic field, as in Faraday's experiments? Its charges are not moving, so the magnetic part qv × B of the Lorentz force is zero; any force on them must come from an electric field qE. So a time-varying magnetic field must create an electric field. This induced electric field differs from the electrostatic field of charges (it can drive charge round a closed loop). Just as moving charges exert forces on a stationary magnet, a moving magnet - more generally, a changing magnetic field - exerts forces on stationary charges. Electricity and magnetism are two faces of one phenomenon.
A rod rotating in a field
A metal rod of length R rotates with angular speed ω about one end, in a plane perpendicular to a uniform field B, with its other end touching a circular metal ring. A small piece dr of the rod at distance r moves at speed v = ωr, so it contributes dε = Bv dr = Bωr dr. Adding from r = 0 to R:
ε = ∫ Bωr dr = ½BωR² between the centre and the rim. With ω = 2πν: ε = πνBR².
The same answer comes from the area swept: in time dt the rod sweeps area ½R² dθ, so ε = B × (rate of sweeping area) = B × ½R² ω. For a wheel with many metal spokes, the spokes act like identical cells in parallel, so the emf between axle and rim is the same as for one spoke.
Worked example 1: sliding rod
A rod 0.5 m long slides at 4 m s⁻¹ along rails in a field of 0.25 T perpendicular to the rails' plane. The circuit's resistance is 2 Ω. ε = Blv = 0.25 × 0.5 × 4 = 0.5 V; I = 0.5 ÷ 2 = 0.25 A. The current in the rod feels a magnetic force BIl = 0.25 × 0.25 × 0.5 ≈ 0.031 N opposing the motion (Lenz's law). To keep the speed constant an equal pull is needed, delivering power Fv = 0.031 × 4 = 0.125 W - exactly the heating I²R = 0.0625 × 2 = 0.125 W in the circuit. Mechanical energy becomes electrical energy and then heat.
Worked example 2: rotating rod
A copper rod 0.5 m long rotates about one end at 100 rad s⁻¹ in a field of 0.4 T parallel to the axis of rotation. ε = ½BωR² = ½ × 0.4 × 100 × (0.5)² = 0.5 × 0.4 × 100 × 0.25 = 5 V between the centre and the rim. At 50 revolutions per second (ω = 2π × 50 ≈ 314 rad s⁻¹), the emf would be about 15.7 V.
Motional emf in different set-ups
-
Straight rod moving sideways
- ε = Blv
- l, v and B mutually perpendicular
-
Rod rotating about one end
- ε = ½BωR²
- Speed grows along the rod
-
Wheel with many spokes
- Spokes in parallel
- Emf same as one spoke
-
Rod moving along its own length or parallel to B
- No emf: no flux cut
Worked example 3: a falling wire
A horizontal wire 4 m long, lying east-west, falls at 6 m s⁻¹ at right angles to a horizontal field component of 4 × 10⁻⁵ T. ε = Blv = 4 × 10⁻⁵ × 4 × 6 = 9.6 × 10⁻⁴ V. Which end is positive follows from the force qv × B on positive charges: with v pointing down and B pointing north, v × B points east, so positive charges are pushed to the eastern end, which is at the higher potential.
Key takeaways
- A conductor moving across a field: ε = Blv (all three perpendicular).
- Faraday's law and the Lorentz force give the same motional emf.
- Rotating rod about one end: ε = ½BωR².
- A changing magnetic field produces an electric field that can drive charges round a loop.
Check your understanding
-
1. A rod 2 m long moves at 5 m s⁻¹ perpendicular to its length and to a field of 0.1 T. What emf is induced across it?
- 0.5 V
- 10 V
- 1 V
- 0.25 V
Show answer
Answer: C. ε = Blv = 0.1 × 2 × 5 = 1 V.
-
2. A metal rod 0.8 m long rotates about one end at 150 rad s⁻¹ in a perpendicular field of 0.5 T. What emf appears between its ends?
- 24 V
- 48 V
- 12 V
- 60 V
Show answer
Answer: A. ε = ½BωR² = ½ × 0.5 × 150 × (0.8)² = 37.5 × 0.64 = 24 V.
-
3. A wheel has 8 metal spokes each 0.4 m long and turns in a plane perpendicular to a field. If one spoke alone gives an emf ε between axle and rim, the wheel gives
- 8ε
- ε/8
- 4ε
- ε
Show answer
Answer: D. The spokes all connect the axle to the rim, so they are like identical cells in parallel. The emf between axle and rim equals that of a single spoke, ε.
-
4. Why must a changing magnetic field produce an electric field?
- Because charges in a stationary loop experience a force, and with v = 0 only an electric field can exert it
- Because the magnetic field does work on moving charges
- Because the loop becomes charged
- Because a magnetic field always points along an electric field
Show answer
Answer: A. With the charges at rest, qv × B = 0, yet an emf drives them round the loop. The force must therefore come from an electric field qE created by the changing magnetic field.
-
5. Assertion (A): Work must be done to keep a rod sliding at constant speed on conducting rails in a magnetic field when the circuit is closed. Reason (R): The induced current in the rod experiences a magnetic force that opposes its motion.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true. The induced current in the rod feels a force BIl that opposes the motion (Lenz's law), so an external agent must supply an equal force and do work, which becomes heat in the circuit. R explains A.
Sign in to keep track of the lessons you finish.