• Foundation
  • About 28 min
  • 5 practice questions

Optical instruments: the simple microscope, compound microscope and telescope

Derive and use the magnifying power of a simple microscope, a compound microscope and a refracting telescope, and explain why large telescopes use mirrors.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain angular magnification and the near point D = 25 cm.
  • Derive m = 1 + D/f and m = D/f for a simple microscope.
  • Use m ≈ (L/fₒ)(D/fₑ) for a compound microscope.
  • Use m = fₒ/fₑ for a telescope and explain reflecting telescopes.

Mirrors, lenses and prisms are combined in periscopes, binoculars, microscopes and telescopes. The human eye itself is an optical instrument (studied in Class 10). An object looks bigger to us when it makes a bigger angle at the eye. Optical instruments work by increasing this angle, and the ratio by which they increase it is the magnifying power or angular magnification.

The simple microscope

A simple microscope (magnifying glass) is a convex lens of short focal length f held close to the eye, with the object at or just inside its focus. The unaided eye sees a small object most clearly at the near point, the least distance of distinct vision, D ≈ 25 cm. The lens lets us bring the object much closer than 25 cm and still see a clear, erect, virtual, enlarged image.

Image at the near point

Using the lens formula, m = v/u = v(1/v − 1/f) = 1 − v/f. With the sign convention the virtual image is on the object's side, so v = −D. Hence m = 1 + D/f. For example, D = 25 cm and f = 5 cm give m = 6.

Image at infinity (relaxed eye)

Viewing an image at the near point strains the eye, so it is often placed at infinity by putting the object at the focus. Without the lens, the largest angle the object of height h can make is θₒ ≈ h/D (object at the near point). With the object at the focus, the image makes θᵢ ≈ h/f. So m = θᵢ/θₒ = D/f, one less than before. The small loss buys comfortable viewing. Realistic lenses limit a simple microscope to a magnifying power of about 9 or less.

The compound microscope

Image formation in a compound microscope

  1. Object just beyond Fₒ The tiny object is placed just outside the focus of the objective.
  2. Objective lens (short fₒ) Forms a real, inverted, enlarged image inside the tube.
  3. First image near Fₑ It lies at or just inside the focus of the eyepiece.
  4. Eyepiece acts as a simple microscope Forms the final virtual, enlarged image, inverted relative to the object.

Two convex lenses are used. The objective, near the object, forms a real, inverted, magnified image. Its linear magnification is mₒ = h′/h = L/fₒ, where the tube length L is the distance between the second focus of the objective and the first focus of the eyepiece. The eyepiece then acts as a simple microscope on this image, giving mₑ = D/fₑ for a final image at infinity (or 1 + D/fₑ at the near point). The total magnification is the product:

Compound microscope (image at infinity): m = mₒ × mₑ ≈ (L/fₒ) × (D/fₑ). Both lenses need short focal lengths.

Worked example 1: simple microscope

A magnifier has f = 5 cm. Image at the near point: m = 1 + D/f = 1 + 25/5 = 6. Image at infinity: m = D/f = 25/5 = 5.

Worked example 2: compound microscope

A compound microscope has fₒ = 1.0 cm, fₑ = 2.5 cm and tube length L = 15 cm; the final image is at infinity. mₒ = L/fₒ = 15/1.0 = 15. mₑ = D/fₑ = 25/2.5 = 10. Magnifying power m = 15 × 10 = 150.

The refracting telescope

A telescope gives angular magnification of distant objects. Its objective has a long focal length and a large aperture; its eyepiece has a short focal length. Light from a distant object forms a real image at the second focus of the objective, and the eyepiece magnifies this image. If the object subtends angle α and the final image subtends β, then α ≈ h/fₒ and β ≈ h/fₑ, where h is the height of the first image. So:

Telescope in normal adjustment (final image at infinity): m = β/α = fₒ/fₑ; tube length = fₒ + fₑ. With the final image at the near point: m = (fₒ/fₑ)(1 + fₑ/D).

The final image of an astronomical telescope is inverted; a terrestrial telescope adds a pair of inverting lenses to make it erect. For an astronomer, two other qualities matter as much as magnification: light-gathering power, which grows with the area of the objective, so fainter objects can be seen, and resolving power, the ability to show two nearly overlapping objects as separate, which also improves with a wider objective.

Worked example 3: telescope

A telescope has fₒ = 150 cm and fₑ = 5 cm. Normal adjustment: m = 150/5 = 30 and the tube length is 150 + 5 = 155 cm. Final image at 25 cm: m = 30 × (1 + 5/25) = 30 × 1.2 = 36. Two stars 1′ apart would appear 30′ = 0.5° apart in normal adjustment.

Reflecting telescopes

Very large lenses are heavy, can be held only at their rims, are hard to make free of defects and suffer from chromatic aberration (coloured fringes, because n depends on wavelength). So modern large telescopes use a concave mirror as the objective. A mirror has no chromatic aberration, weighs less than a lens of the same optical quality and can be supported over its whole back. Because a mirror focuses light in front of itself, inside the tube, designs move the image out of the way. In the Cassegrain design, a small convex secondary mirror sends the converging light back through a hole in the centre of the primary mirror to the eyepiece, giving a long focal length in a short tube.

Microscope and telescope compared

  • Compound microscope
    • Views tiny, nearby objects
    • Objective: short focal length, small aperture
    • Eyepiece: short focal length
    • m ≈ (L/fₒ)(D/fₑ)
  • Refracting telescope
    • Views large, distant objects
    • Objective: long focal length, large aperture
    • Eyepiece: short focal length
    • m = fₒ/fₑ, tube length fₒ + fₑ
  • Reflecting telescope
    • Concave mirror as objective
    • No chromatic aberration
    • Lighter and supported from behind
    • Cassegrain: convex secondary mirror

Key takeaways

  • Magnifying power is the ratio of angles subtended at the eye.
  • Simple microscope: m = 1 + D/f (near point) or D/f (infinity).
  • Compound microscope: m ≈ (L/fₒ)(D/fₑ); telescope: m = fₒ/fₑ.
  • Large telescopes use mirrors: no chromatic aberration and easier support.

Check your understanding

  1. 1. A magnifying glass of focal length 2.5 cm forms the final image at the near point (25 cm). Its magnifying power is

    1. 10
    2. 11
    3. 9
    4. 12.5
    Show answer

    Answer: B. m = 1 + D/f = 1 + 25/2.5 = 1 + 10 = 11.

  2. 2. A telescope has an objective of focal length 100 cm and an eyepiece of focal length 4 cm. In normal adjustment, the distance between the lenses is

    1. 96 cm
    2. 25 cm
    3. 104 cm
    4. 400 cm
    Show answer

    Answer: C. In normal adjustment the first image is at the second focus of the objective and the first focus of the eyepiece, so the separation is fₒ + fₑ = 100 + 4 = 104 cm. (Its magnifying power is 100/4 = 25.)

  3. 3. A compound microscope has fₒ = 0.5 cm, fₑ = 2.5 cm and tube length 10 cm. With the final image at infinity, its magnifying power is about

    1. 200
    2. 50
    3. 100
    4. 500
    Show answer

    Answer: A. mₒ = L/fₒ = 10/0.5 = 20 and mₑ = D/fₑ = 25/2.5 = 10, so m = 20 × 10 = 200.

  4. 4. Why is the objective of an astronomical telescope made with a large diameter?

    1. To make the final image erect
    2. To reduce the length of the tube
    3. To increase the magnifying power fₒ/fₑ
    4. To gather more light and resolve objects that are very close together
    Show answer

    Answer: D. Light-gathering power grows with the area of the objective, so fainter objects become visible, and resolving power also improves with a wider objective. The magnifying power depends on the focal lengths, not the diameter.

  5. 5. Assertion (A): Most large modern astronomical telescopes use a concave mirror as the objective. Reason (R): A lens objective of the same size would be lighter than a mirror and easier to support.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: C. A is true. R is false: a large lens is heavier than a mirror of the same optical quality and can be held only at its rim, while a mirror can be supported over its whole back. Mirrors also have no chromatic aberration.

Privacy · Terms · Refunds · Delivery