• Foundation
  • About 28 min
  • 5 practice questions

Power of a lens, lens combinations and refraction through a prism

Use power in dioptres, combine thin lenses in contact and at a distance, derive the prism relations A = r₁ + r₂ and δ = i + e − A, and find refractive index from minimum deviation.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define the power of a lens and use the dioptre.
  • Derive 1/f = 1/f₁ + 1/f₂ for thin lenses in contact and use P = P₁ + P₂.
  • Trace an image through two separated lenses step by step.
  • Derive the prism formula and use n = sin[(A + Dₘ)/2] / sin(A/2).

Opticians do not write focal lengths on prescriptions; they write powers such as +2.5 D. Cameras, microscopes and telescopes use several lenses together. And a prism, the simplest piece of glass with non-parallel faces, gives the most accurate way to measure a refractive index. This lesson connects these three ideas.

Power of a lens

A lens of short focal length bends light more strongly. The power of a lens measures this convergence or divergence. Consider a ray parallel to the axis at height h; it is bent through an angle δ with tan δ = h/f. For h = 1 unit and small δ, δ ≈ 1/f. So:

Power P = 1/f, with f in metres. SI unit: dioptre (D), 1 D = 1 m⁻¹. Converging (convex) lens: P positive. Diverging (concave) lens: P negative.

A lens of +2.5 D is a convex lens of focal length 1/2.5 = 0.40 m = 40 cm; a lens of −4 D is a concave lens of focal length −0.25 m = −25 cm.

Thin lenses in contact

Place two thin lenses of focal lengths f₁ and f₂ in contact, sharing an optical centre. The first lens alone would form an image I₁ of an object O; that image serves as the object for the second lens, which forms the final image I.

  1. First lens: 1/v₁ − 1/u = 1/f₁.
  2. Second lens, with object at v₁: 1/v − 1/v₁ = 1/f₂.
  3. Add the equations: v₁ cancels, leaving 1/v − 1/u = 1/f₁ + 1/f₂.
  4. Compare with a single lens 1/v − 1/u = 1/f: so 1/f = 1/f₁ + 1/f₂.

For many lenses, 1/f = 1/f₁ + 1/f₂ + 1/f₃ + …, and P = P₁ + P₂ + P₃ + … as an algebraic sum (convex positive, concave negative). Because each lens's image becomes the next lens's object, the total magnification is the product m = m₁ × m₂ × m₃ …. Such combinations are used in cameras, microscopes and telescopes to improve sharpness and get the required magnification.

Worked example 1: lenses in contact

A convex lens of focal length 25 cm is in contact with a concave lens of focal length 50 cm. Powers: P₁ = 1/0.25 = +4 D; P₂ = 1/(−0.50) = −2 D. Total: P = +4 − 2 = +2 D, so f = 1/2 m = 50 cm. The combination is converging.

Worked example 2: two lenses at a distance

When lenses are separated, do not add powers; trace the image lens by lens. An object is 15 cm to the left of a convex lens L₁ (f₁ = +10 cm). A second convex lens L₂ (f₂ = +10 cm) is 20 cm to the right of L₁. L₁: 1/v₁ = 1/10 − 1/15 = 1/30, so v₁ = +30 cm, i.e. 10 cm beyond L₂. L₂: the rays are still converging towards that point, so it is a virtual object with u₂ = +10 cm. 1/v₂ = 1/f₂ + 1/u₂ = 1/10 + 1/10 = 1/5, so v₂ = +5 cm. Magnification: m₁ = 30/(−15) = −2, m₂ = 5/10 = 0.5, m = m₁m₂ = −1. The final image is real, inverted, the same size as the object and 5 cm to the right of L₂.

Refraction through a prism

A triangular prism ABC has refracting angle A between the two faces the light crosses. A ray enters face AB at point Q with angle of incidence i and angle of refraction r₁, meets face AC at point R with angle of incidence r₂ inside the glass, and leaves with angle of emergence e. The angle between the incident and emergent directions is the angle of deviation δ.

  1. The normals at Q and R meet at N. In the quadrilateral AQNR the angles at Q and R are 90°, so A + ∠QNR = 180°.
  2. In triangle QNR: r₁ + r₂ + ∠QNR = 180°.
  3. Comparing: r₁ + r₂ = A.
  4. Deviation at the first face is (i − r₁) and at the second face (e − r₂). Total: δ = (i − r₁) + (e − r₂) = i + e − A.

If δ is plotted against i, the curve falls to a minimum and rises again. Any value of δ above the minimum occurs for two values of i, because swapping i and e leaves δ = i + e − A unchanged (light paths are reversible). At the bottom, the angle of minimum deviation Dₘ, the path is symmetric: i = e, r₁ = r₂ = r, and the ray inside travels parallel to the base.

  1. At minimum deviation, 2r = A, so r = A/2.
  2. Also Dₘ = 2i − A, so i = (A + Dₘ)/2.
  3. Snell's law at the first face: n₂₁ = sin i / sin r = sin[(A + Dₘ)/2] / sin(A/2).

For a thin prism (A small), Dₘ is also small and the sines can be replaced by the angles: n₂₁ ≈ [(A + Dₘ)/2]/(A/2), so Dₘ = (n₂₁ − 1)A. Thin prisms deviate light only slightly.

Finding refractive index with a prism

  1. Measure the prism angle A Angle between the two refracting faces.
  2. Vary the angle of incidence Record the deviation for each value.
  3. Find the minimum deviation Dₘ Lowest point of the δ–i graph.
  4. Calculate n n = sin[(A + Dₘ)/2] / sin(A/2).

Since n depends on wavelength, different colours deviate by different amounts: white light passing through a prism spreads into its colours. This splitting is called dispersion; violet, with the largest refractive index in glass, deviates most and red least.

Worked example 3: refractive index from minimum deviation

A prism of angle 60° gives a minimum deviation of 30°. n = sin[(60° + 30°)/2] / sin(60°/2) = sin 45° / sin 30° = 0.7071/0.5 = 1.414 = √2. The angle of incidence at minimum deviation is (60° + 30°)/2 = 45°.

Worked example 4: a thin prism

A thin glass prism has A = 5° and n = 1.5. Deviation δ = (n − 1)A = 0.5 × 5° = 2.5°.

Key takeaways

  • P = 1/f (f in metres), in dioptres; convex positive, concave negative.
  • Lenses in contact: P = P₁ + P₂ + …; magnifications multiply.
  • Separated lenses: the image of one is the object of the next.
  • Prism: r₁ + r₂ = A, δ = i + e − A, n = sin[(A + Dₘ)/2] / sin(A/2); thin prism δ = (n − 1)A.

Check your understanding

  1. 1. The power of a concave lens of focal length 25 cm is

    1. +4 D
    2. −0.25 D
    3. −4 D
    4. −25 D
    Show answer

    Answer: C. P = 1/f with f in metres. f = −25 cm = −0.25 m, so P = 1/(−0.25) = −4 D. The minus sign shows a diverging lens.

  2. 2. Lenses of power +5 D and −3 D are placed in contact. The focal length of the combination is

    1. +50 cm
    2. −50 cm
    3. +12.5 cm
    4. +20 cm
    Show answer

    Answer: A. P = +5 − 3 = +2 D. f = 1/P = 1/2 m = 0.5 m = +50 cm, a converging combination.

  3. 3. A ray passes through an equilateral prism (A = 60°) at minimum deviation. The angle of refraction at the first face is

    1. 60°
    2. 45°
    3. 15°
    4. 30°
    Show answer

    Answer: D. At minimum deviation r₁ = r₂ and r₁ + r₂ = A, so r = A/2 = 60°/2 = 30°.

  4. 4. A prism of angle 60° has refractive index √3. Its angle of minimum deviation is

    1. 30°
    2. 45°
    3. 60°
    4. 90°
    Show answer

    Answer: C. sin[(A + Dₘ)/2] = n sin(A/2) = √3 × sin 30° = √3/2, so (60° + Dₘ)/2 = 60°, which gives Dₘ = 120° − 60° = 60°.

  5. 5. Assertion (A): For a given prism, two different angles of incidence can produce the same angle of deviation. Reason (R): In δ = i + e − A, the deviation is unchanged when i and e are interchanged, since a ray can retrace its path.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. If a ray enters at i and leaves at e, the reversed ray enters at e and leaves at i with the same deviation. So each deviation above the minimum corresponds to two angles of incidence, which R explains.

Privacy · Terms · Refunds · Delivery