- Foundation
- About 25 min
- 5 practice questions
Reflection by spherical mirrors: sign convention and the mirror equation
Use the Cartesian sign convention, prove f = R/2, derive the mirror equation and the magnification formula, and locate images formed by concave and convex mirrors.
If something looks wrong, please tell us.
By the end of this lesson you can
- State the laws of reflection and apply them to a curved mirror.
- Use the Cartesian sign convention for distances and heights.
- Show that the focal length of a spherical mirror is half its radius of curvature.
- Derive and use the mirror equation 1/v + 1/u = 1/f and the magnification m = −v/u.
Light visible to the eye has wavelengths of roughly 400 nm to 750 nm, far smaller than the mirrors, lenses and objects around us. Because of this, light can be treated as travelling along straight lines called rays, and a bundle of rays is a beam. This ray picture is the basis of the whole chapter: with just two laws, reflection and refraction, we can predict where images form and design instruments such as microscopes and telescopes. In vacuum light travels at c ≈ 3 × 10⁸ m s⁻¹ (the accepted value is 2.99792458 × 10⁸ m s⁻¹), the highest speed possible in nature.
Laws of reflection on a curved surface
The two laws of reflection hold at every point of any surface, flat or curved: (1) the angle of reflection equals the angle of incidence, both measured from the normal; (2) the incident ray, the reflected ray and the normal at the point of incidence lie in one plane. For a spherical mirror the normal at any point is the radius drawn from the centre of curvature C to that point. The middle point of the mirror is its pole P, and the line through P and C is the principal axis.
The Cartesian sign convention
A single formula can cover every mirror and every object position only if distances carry signs. We place the pole at the origin and the principal axis along the x-axis, with the incident light travelling from left to right.
| Quantity | Positive when | Negative when |
|---|---|---|
| Distance along the axis (u, v, f, R) | Measured from the pole in the direction of the incident light | Measured against the direction of the incident light |
| Height (h, h′) | Measured upwards from the principal axis | Measured downwards from the principal axis |
Since a real object stands in front of the mirror, against the direction in which light leaves the mirror, u is negative for a real object. A concave mirror has its focus in front, so f is negative for a concave mirror and positive for a convex mirror.
Why f = R/2
Take a ray parallel to the principal axis that strikes a concave mirror at M, at a small height above the axis. Such rays, close to the axis and making small angles with it, are called paraxial rays. Let θ be the angle of incidence. The normal at M is CM, so the angle MCP = θ. The reflected ray makes angle θ with the normal on the other side, so it crosses the axis at F with angle MFP = 2θ. Drop a perpendicular MD on the axis.
- From the right triangle MDC: tan θ = MD/CD.
- From the right triangle MDF: tan 2θ = MD/FD.
- For small angles tan θ ≈ θ and tan 2θ ≈ 2θ, so MD/FD = 2 × MD/CD, giving FD = CD/2.
- For a paraxial ray D lies almost at P, so FD ≈ FP = f and CD ≈ CP = R.
- Hence f = R/2. The same steps work for a convex mirror, where F and C lie behind the mirror.
Locating an image with rays
Every point of an object sends out rays in all directions; its image is the point where the reflected rays meet (a real image) or from which they appear to come (a virtual image). To find it, any two of these easy rays are enough:
- A ray parallel to the axis reflects through F (or appears to come from F for a convex mirror).
- A ray through C (or heading towards C for a convex mirror) retraces its path.
- A ray through F (or heading towards F for a convex mirror) reflects parallel to the axis.
- A ray striking the pole reflects symmetrically about the axis.
Deriving the mirror equation
Let an object AB stand on the axis at B in front of a concave mirror, beyond C, and let its real inverted image be A′B′. Let M be the point where the ray from A parallel to the axis meets the mirror; for paraxial rays PM can be treated as a straight line perpendicular to the axis, so PM = AB.
- Triangles A′B′F and MPF are similar: B′A′/PM = B′F/FP, that is B′A′/BA = B′F/FP.
- Triangles A′B′P and ABP are similar (the ray to the pole reflects at equal angles): B′A′/BA = B′P/BP.
- Equate the two: B′F/FP = B′P/BP, and write B′F = B′P − FP, so (B′P − FP)/FP = B′P/BP.
- Apply signs. Object, image and focus are all in front of the mirror, so B′P = −v, FP = −f and BP = −u.
- Substitute: (−v + f)/(−f) = −v/(−u), which simplifies to v/f − 1 = v/u.
- Divide by v: 1/f − 1/v = 1/u, that is 1/v + 1/u = 1/f.
The linear magnification is m = h′/h. From the similar triangles A′B′P and ABP, with signs, −h′/h = −v/−u, so m = h′/h = −v/u. A negative m means an inverted (real) image; a positive m means an erect (virtual) image. Though we derived these results for one case, with signs used properly they hold for both mirrors and every object position.
Mirror equation: 1/v + 1/u = 1/f, with f = R/2. Magnification: m = h′/h = −v/u. Concave mirror: f negative. Convex mirror: f positive.
Concave and convex mirrors at a glance
-
Concave (converging) mirror
- Focus in front: f is negative
- Real, inverted image when the object is beyond F
- Virtual, erect, enlarged image when the object is between P and F
- Uses: shaving and dental mirrors, reflectors
-
Convex (diverging) mirror
- Focus behind: f is positive
- Always a virtual, erect, diminished image
- Image always lies between P and F
- Use: rear-view mirrors, for a wide field of view
Worked example 1: concave mirror, object beyond F
An object stands 20 cm in front of a concave mirror of radius of curvature 30 cm. Find the image. Given: R = −30 cm, so f = −15 cm; u = −20 cm. Mirror equation: 1/v = 1/f − 1/u = −1/15 + 1/20 = (−4 + 3)/60 = −1/60, so v = −60 cm. Magnification: m = −v/u = −(−60)/(−20) = −3. Answer: the image is 60 cm in front of the mirror, real, inverted and three times the size of the object.
Worked example 2: convex mirror
A convex mirror has focal length 20 cm. An object is 30 cm in front of it. Given: f = +20 cm, u = −30 cm. 1/v = 1/f − 1/u = 1/20 + 1/30 = (3 + 2)/60 = 5/60, so v = +12 cm. m = −v/u = −12/(−30) = +0.4. Answer: the image is 12 cm behind the mirror, virtual, erect and 0.4 times the size of the object, which is why such mirrors show a wide view of the road.
Worked example 3: concave mirror as a magnifier
A face is 8 cm from a concave mirror of focal length 12 cm. Given: f = −12 cm, u = −8 cm. 1/v = −1/12 + 1/8 = (−2 + 3)/24 = 1/24, so v = +24 cm. m = −24/(−8) = +3. The image is virtual, erect, three times larger and 24 cm behind the mirror. This is how a shaving mirror works.
A useful thought test: if half of a concave mirror is covered with black paper, the image still shows the whole object, because every uncovered part of the mirror receives rays from every point of the object. Only the brightness falls, since less light is reflected.
Key takeaways
- Distances are measured from the pole; along the incident light is positive, against it is negative.
- For paraxial rays f = R/2.
- 1/v + 1/u = 1/f and m = −v/u hold for all spherical mirrors when signs are used.
- A convex mirror always gives a virtual, erect, diminished image.
Check your understanding
-
1. The radius of curvature of a concave mirror is 24 cm. Using the Cartesian sign convention, its focal length is
- −12 cm
- +12 cm
- −24 cm
- −48 cm
Show answer
Answer: A. f = R/2. For a concave mirror the centre of curvature lies in front, against the incident light, so R = −24 cm and f = −24/2 = −12 cm.
-
2. An object is placed 30 cm in front of a concave mirror of focal length 10 cm. Where is the image?
- 7.5 cm in front of the mirror
- 15 cm in front of the mirror
- 15 cm behind the mirror
- 30 cm in front of the mirror
Show answer
Answer: B. u = −30 cm, f = −10 cm. 1/v = 1/f − 1/u = −1/10 + 1/30 = (−3 + 1)/30 = −2/30, so v = −15 cm. The negative sign means the image is 15 cm in front of the mirror (real, inverted, m = −0.5).
-
3. A concave mirror forms an image with magnification −2 of an object placed 15 cm in front of it. Where is the image?
- 7.5 cm in front of the mirror
- 30 cm in front of the mirror
- 30 cm behind the mirror
- 15 cm behind the mirror
Show answer
Answer: B. m = −v/u, so −2 = −v/(−15), giving v = −30 cm. A negative v means the image is 30 cm in front of the mirror; a negative m confirms a real, inverted image.
-
4. For a real object, the image formed by a convex mirror is always
- real, inverted and diminished
- virtual, inverted and enlarged
- real, erect and diminished
- virtual, erect and diminished
Show answer
Answer: D. For a convex mirror f > 0 and u < 0, so 1/v = 1/f − 1/u is the sum of two positive terms: v is positive (behind the mirror, virtual) and smaller than f. Then m = −v/u is positive and less than 1: erect and diminished.
-
5. Assertion (A): Convex mirrors are used as rear-view mirrors in vehicles. Reason (R): A convex mirror gives an erect, diminished image and so shows a wide field of view.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both statements are true. Because the image is always erect and smaller than the object, a convex mirror fits a large region of the road into a small mirror, and that is exactly why it is chosen for rear-view mirrors. So R correctly explains A.
Sign in to keep track of the lessons you finish.