• Foundation
  • About 28 min
  • 5 practice questions

Refraction at spherical surfaces and the thin lens formula

Derive the refraction formula for a spherical surface, build the lens maker's formula and the thin lens formula from it, and find the position, size and nature of images formed by lenses.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Derive n₂/v − n₁/u = (n₂ − n₁)/R for a single spherical surface.
  • Derive the lens maker's formula and the thin lens formula.
  • Use m = v/u for a lens and interpret its sign.
  • Predict how a lens behaves when placed in a liquid.

A lens is just two refracting surfaces placed close together. If we know what one curved surface does to light, we can apply that result twice and get the whole lens. That is exactly the route this lesson takes, so take each step slowly.

Refraction at a single spherical surface

Let a spherical surface of radius R (centre C) separate a medium of refractive index n₁ (left) from one of n₂ (right), with n₂ > n₁. A point object O lies on the axis at distance u; a ray from O strikes the surface at N, where the normal is NC, and after refraction meets the axis at the image I. Let M be the point where the axis meets the surface. The aperture is small, so all angles are small and tan ≈ angle.

  1. Small angles: ∠NOM ≈ MN/OM, ∠NCM ≈ MN/MC, ∠NIM ≈ MN/MI.
  2. In triangle NOC the angle of incidence i is the exterior angle: i = ∠NOM + ∠NCM = MN/OM + MN/MC.
  3. In triangle NCI: r = ∠NCM − ∠NIM = MN/MC − MN/MI.
  4. Snell's law for small angles: n₁ i = n₂ r.
  5. Substitute and cancel MN: n₁/OM + n₂/MI = (n₂ − n₁)/MC.
  6. Apply signs: OM = −u, MI = +v, MC = +R. Result: n₂/v − n₁/u = (n₂ − n₁)/R.

Refraction at a spherical surface: n₂/v − n₁/u = (n₂ − n₁)/R (light going from medium 1 into medium 2).

Worked example 1: a curved glass surface

A point object in air is 30 cm from a convex spherical glass surface (n = 1.5, R = 10 cm). Given: n₁ = 1, n₂ = 1.5, u = −30 cm, R = +10 cm. 1.5/v − 1/(−30) = (1.5 − 1)/10, so 1.5/v = 1/20 − 1/30 = 1/60, and v = 1.5 × 60 = 90 cm. Answer: a real image forms inside the glass, 90 cm from the surface.

From one surface to a thin lens

How the lens formulae are built

  1. Surface 1 forms image I₁ Apply the single-surface result with light going from n₁ into n₂.
  2. I₁ acts as the object for surface 2 Light now goes from n₂ back into n₁.
  3. Add the two equations For a thin lens the distances to I₁ from both surfaces are equal, so they cancel.
  4. Object at infinity gives the focus This yields the lens maker's formula.
  5. Combine This yields the thin lens formula 1/v − 1/u = 1/f.

For a thin lens of refractive index n₂ in a medium n₁, with surface radii R₁ and R₂, adding the two surface equations gives n₁/v − n₁/u = (n₂ − n₁)(1/R₁ − 1/R₂). Putting u = −∞ makes v = f, so:

Lens maker's formula: 1/f = (n₂₁ − 1)(1/R₁ − 1/R₂), where n₂₁ = n₂/n₁. Thin lens formula: 1/v − 1/u = 1/f. Magnification: m = h′/h = v/u.

For a double convex lens, R₁ is positive and R₂ negative, so f comes out positive (converging). For a double concave lens, R₁ is negative and R₂ positive, so f is negative (diverging). A lens has two foci, one on each side, equally far from the optical centre for a thin lens. A negative m means a real, inverted image; a positive m means a virtual, erect image.

Ray rules for lenses

  • A ray parallel to the axis passes through the second focus F′ of a convex lens, or appears to come from the first focus F of a concave lens.
  • A ray through the optical centre goes straight on, undeviated.
  • A ray through the first focus of a convex lens (or heading towards the second focus of a concave lens) emerges parallel to the axis.

Worked example 2: lens maker's formula, then the image

A double convex lens (n = 1.5) has both radii 20 cm. Focal length: R₁ = +20 cm, R₂ = −20 cm. 1/f = (1.5 − 1)(1/20 + 1/20) = 0.5 × 0.1 = 0.05 cm⁻¹, so f = +20 cm. Image of an object 30 cm away: u = −30 cm. 1/v = 1/f + 1/u = 1/20 − 1/30 = 1/60, so v = +60 cm. m = v/u = 60/(−30) = −2. Answer: a real, inverted image twice the size, 60 cm on the far side of the lens.

Worked example 3: concave lens

A concave lens of focal length 15 cm has an object 10 cm in front. Given: f = −15 cm, u = −10 cm. 1/v = 1/f + 1/u = −1/15 − 1/10 = (−2 − 3)/30 = −1/6, so v = −6 cm. m = v/u = (−6)/(−10) = +0.6. The image is virtual, erect, 0.6 times the size and 6 cm from the lens on the object's side. A concave lens always gives such an image of a real object.

A lens in a liquid

The factor (n₂₁ − 1) depends on the surrounding medium. When the surrounding refractive index n₁ comes closer to that of the lens, (n₂₁ − 1) shrinks and the focal length grows. If the liquid has the same refractive index as the glass, n₂₁ = 1, 1/f = 0 and the lens behaves like a flat sheet: it seems to vanish. If the liquid is optically denser than the glass, n₂₁ < 1 and a convex lens actually diverges light.

Worked example 4: focal length in water

A glass lens (n = 1.5) has f = 30 cm in air. Find f in water (n = 4/3). In air: 1/30 = (1.5 − 1) × K, where K = (1/R₁ − 1/R₂). In water: n₂₁ = 1.5 ÷ (4/3) = 1.125, so 1/f_w = (1.125 − 1) × K. Dividing: f_w/30 = 0.5/0.125 = 4, so f_w = 120 cm. The lens is four times weaker in water.

Key takeaways

  • One surface: n₂/v − n₁/u = (n₂ − n₁)/R.
  • Lens maker: 1/f = (n₂₁ − 1)(1/R₁ − 1/R₂); thin lens: 1/v − 1/u = 1/f; m = v/u.
  • Convex lens: f positive; concave lens: f negative.
  • Surrounding a lens with a medium of closer refractive index increases its focal length.

Check your understanding

  1. 1. A plano-convex lens (n = 1.5) has a curved face of radius 30 cm. Its focal length is

    1. 30 cm
    2. 60 cm
    3. 15 cm
    4. 90 cm
    Show answer

    Answer: B. For the flat face 1/R = 0. 1/f = (1.5 − 1)(1/30 − 0) = 0.5/30 = 1/60, so f = 60 cm.

  2. 2. An object is 15 cm from a convex lens of focal length 10 cm. The magnification is

    1. +2
    2. −0.5
    3. +0.5
    4. −2
    Show answer

    Answer: D. u = −15 cm, f = +10 cm. 1/v = 1/10 − 1/15 = 1/30, so v = +30 cm. m = v/u = 30/(−15) = −2: a real, inverted image twice the size.

  3. 3. A glass lens with refractive index 1.52 is dipped in a liquid of refractive index 1.52. The lens now

    1. converges light more strongly
    2. diverges light
    3. behaves like a flat glass plate with no focusing effect
    4. has its focal length halved
    Show answer

    Answer: C. n₂₁ = 1.52/1.52 = 1, so (n₂₁ − 1) = 0 and 1/f = 0. The focal length is infinite: light passes through without converging or diverging, so the lens cannot be seen as a lens.

  4. 4. Assertion (A): The focal length of a convex glass lens increases when it is placed in water. Reason (R): The factor (n₂₁ − 1) in the lens maker's formula becomes smaller when the surrounding medium has a refractive index closer to that of the glass.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. Water (n ≈ 1.33) is closer to glass (n ≈ 1.5) than air is, so n₂₁ drops from 1.5 to about 1.13, (n₂₁ − 1) falls and 1/f falls, so f increases. R is the reason for A.

  5. 5. A real object is placed in front of a concave lens. The image is

    1. real and inverted, beyond 2F
    2. real and enlarged
    3. virtual and enlarged, beyond F
    4. virtual, erect and diminished, between the lens and F
    Show answer

    Answer: D. With f < 0 and u < 0, 1/v = 1/f + 1/u is negative and larger in size than 1/f, so v is negative and smaller in size than f: the image is on the object's side, between the lens and F. m = v/u is positive and less than 1: erect and diminished.

Privacy · Terms · Refunds · Delivery