Revision notes

Chapter 9 Ray Optics and Optical Instruments: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Reflection by spherical mirrors: sign convention and the mirror equation

Cartesian sign convention for mirrors and lenses
QuantityPositive whenNegative when
Distance along the axis (u, v, f, R)Measured from the pole in the direction of the incident lightMeasured against the direction of the incident light
Height (h, h′)Measured upwards from the principal axisMeasured downwards from the principal axis

Mirror equation: 1/v + 1/u = 1/f, with f = R/2. Magnification: m = h′/h = −v/u. Concave mirror: f negative. Convex mirror: f positive.

Concave and convex mirrors at a glance

  • Concave (converging) mirror
    • Focus in front: f is negative
    • Real, inverted image when the object is beyond F
    • Virtual, erect, enlarged image when the object is between P and F
    • Uses: shaving and dental mirrors, reflectors
  • Convex (diverging) mirror
    • Focus behind: f is positive
    • Always a virtual, erect, diminished image
    • Image always lies between P and F
    • Use: rear-view mirrors, for a wide field of view
  • Distances are measured from the pole; along the incident light is positive, against it is negative.
  • For paraxial rays f = R/2.
  • 1/v + 1/u = 1/f and m = −v/u hold for all spherical mirrors when signs are used.
  • A convex mirror always gives a virtual, erect, diminished image.
Read the full lesson

Lesson 2

Refraction and total internal reflection

When does total internal reflection happen?

  1. Light travels from denser to rarer medium Only then does the ray bend away from the normal.
  2. Angle of incidence increases The refracted ray bends further from the normal.
  3. i equals the critical angle The refracted ray grazes the surface: r = 90°.
  4. i exceeds the critical angle No refraction is possible; all the light is reflected back.
Critical angles calculated from typical refractive indices
Medium (in air)Refractive indexCritical angle (sin iᶜ = 1/n)
Water1.33about 48.8°
Crown glass1.52about 41.1°
Diamond2.42about 24.4°

Uses of total internal reflection

  • Totally reflecting prisms
    • Right-angled glass prisms turn light through 90° or 180°
    • They can also invert an image without changing its size
    • They need iᶜ < 45°, i.e. n > √2 ≈ 1.41, which ordinary glass satisfies
  • Optical fibres
    • A glass or quartz core of higher refractive index inside a cladding of lower refractive index
    • Light hits the core wall at more than the critical angle and is reflected again and again
    • Carries telephone, internet and video signals; also used as light pipes to view inside the body
  • Sparkle of diamond
    • Very small critical angle (about 24°)
    • Light entering is reflected many times inside before it escapes
  • Mirage
    • Hot air near the ground is optically rarer than the cooler air above
    • Light from the sky bends and is totally reflected, looking like water on the road

Snell's law: n₁ sin i = n₂ sin r. Apparent depth = real depth / n. Critical angle: sin iᶜ = 1/n (denser medium in air). TIR needs denser → rarer and i > iᶜ.

  • n₂₁ = sin i / sin r = n₂/n₁ = v₁/v₂, independent of i.
  • A slab shifts a ray sideways without deviating it.
  • Total internal reflection needs light going from denser to rarer and i greater than the critical angle.
  • Prisms, optical fibres, the sparkle of diamonds and mirages all rely on total internal reflection.
Read the full lesson

Lesson 3

Refraction at spherical surfaces and the thin lens formula

Refraction at a spherical surface: n₂/v − n₁/u = (n₂ − n₁)/R (light going from medium 1 into medium 2).

How the lens formulae are built

  1. Surface 1 forms image I₁ Apply the single-surface result with light going from n₁ into n₂.
  2. I₁ acts as the object for surface 2 Light now goes from n₂ back into n₁.
  3. Add the two equations For a thin lens the distances to I₁ from both surfaces are equal, so they cancel.
  4. Object at infinity gives the focus This yields the lens maker's formula.
  5. Combine This yields the thin lens formula 1/v − 1/u = 1/f.

Lens maker's formula: 1/f = (n₂₁ − 1)(1/R₁ − 1/R₂), where n₂₁ = n₂/n₁. Thin lens formula: 1/v − 1/u = 1/f. Magnification: m = h′/h = v/u.

  • One surface: n₂/v − n₁/u = (n₂ − n₁)/R.
  • Lens maker: 1/f = (n₂₁ − 1)(1/R₁ − 1/R₂); thin lens: 1/v − 1/u = 1/f; m = v/u.
  • Convex lens: f positive; concave lens: f negative.
  • Surrounding a lens with a medium of closer refractive index increases its focal length.
Read the full lesson

Lesson 4

Power of a lens, lens combinations and refraction through a prism

Power P = 1/f, with f in metres. SI unit: dioptre (D), 1 D = 1 m⁻¹. Converging (convex) lens: P positive. Diverging (concave) lens: P negative.

Finding refractive index with a prism

  1. Measure the prism angle A Angle between the two refracting faces.
  2. Vary the angle of incidence Record the deviation for each value.
  3. Find the minimum deviation Dₘ Lowest point of the δ–i graph.
  4. Calculate n n = sin[(A + Dₘ)/2] / sin(A/2).
  • P = 1/f (f in metres), in dioptres; convex positive, concave negative.
  • Lenses in contact: P = P₁ + P₂ + …; magnifications multiply.
  • Separated lenses: the image of one is the object of the next.
  • Prism: r₁ + r₂ = A, δ = i + e − A, n = sin[(A + Dₘ)/2] / sin(A/2); thin prism δ = (n − 1)A.
Read the full lesson

Lesson 5

Optical instruments: the simple microscope, compound microscope and telescope

Image formation in a compound microscope

  1. Object just beyond Fₒ The tiny object is placed just outside the focus of the objective.
  2. Objective lens (short fₒ) Forms a real, inverted, enlarged image inside the tube.
  3. First image near Fₑ It lies at or just inside the focus of the eyepiece.
  4. Eyepiece acts as a simple microscope Forms the final virtual, enlarged image, inverted relative to the object.

Compound microscope (image at infinity): m = mₒ × mₑ ≈ (L/fₒ) × (D/fₑ). Both lenses need short focal lengths.

Telescope in normal adjustment (final image at infinity): m = β/α = fₒ/fₑ; tube length = fₒ + fₑ. With the final image at the near point: m = (fₒ/fₑ)(1 + fₑ/D).

Microscope and telescope compared

  • Compound microscope
    • Views tiny, nearby objects
    • Objective: short focal length, small aperture
    • Eyepiece: short focal length
    • m ≈ (L/fₒ)(D/fₑ)
  • Refracting telescope
    • Views large, distant objects
    • Objective: long focal length, large aperture
    • Eyepiece: short focal length
    • m = fₒ/fₑ, tube length fₒ + fₑ
  • Reflecting telescope
    • Concave mirror as objective
    • No chromatic aberration
    • Lighter and supported from behind
    • Cassegrain: convex secondary mirror
  • Magnifying power is the ratio of angles subtended at the eye.
  • Simple microscope: m = 1 + D/f (near point) or D/f (infinity).
  • Compound microscope: m ≈ (L/fₒ)(D/fₑ); telescope: m = fₒ/fₑ.
  • Large telescopes use mirrors: no chromatic aberration and easier support.
Read the full lesson

Privacy · Terms · Refunds · Delivery