- Foundation
- About 14 min
- 5 practice questions
Magnetic separation and choosing the right methods
Separate magnetic materials with a magnet, choose the right method for any mixture from the properties of its components, and plan a sequence of methods for mixtures with several components.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain magnetic separation and its everyday and industrial uses.
- Match a mixture to a suitable method using the property that differs.
- Plan the order of steps to separate a mixture of three or more components.
A carpenter drops a handful of iron nails into a heap of sawdust. Picking them out one by one would take ages. Moving a magnet through the sawdust brings them all out in seconds.
Magnetic separation
Magnetic separation is the separation of magnetic substances (such as iron) from non-magnetic ones using a magnet.
It works because iron, nickel and cobalt are attracted by a magnet while sawdust, sand, plastic and most other materials are not. Recyclers and scrap yards use large magnets, often fixed to cranes, to lift iron and steel out of heaps of waste so that it can be recycled.
Choosing a method
| Property that differs | Method | Example |
|---|---|---|
| Size, colour, shape (few pieces) | Handpicking | Stones from dal |
| Weight (heavy and light solids) | Winnowing | Husk from grain |
| Particle size | Sieving | Bran from flour |
| Solid dissolved in liquid | Evaporation | Salt from salt water |
| Heavy insoluble solid in liquid, or two liquids that form layers | Sedimentation and decantation | Tea leaves from tea; oil from water |
| Insoluble solid in liquid | Filtration | Mud from water |
| Magnetic and non-magnetic | Magnetic separation | Iron nails from sawdust |
Methods of separation
-
Solid from solid
- Handpicking
- Threshing and winnowing
- Sieving
- Magnetic separation
-
Solid from liquid
- Sedimentation and decantation
- Filtration
- Evaporation (dissolved solid)
-
Liquid from liquid
- Decantation (oil and water)
-
Fat from curd
- Churning
Worked example 1: a three-part mixture
A jar contains iron filings, sand and salt mixed together. Separate all three. Step 1, magnet first: move a magnet (wrapped in paper so the filings come off easily) through the dry mixture to remove the iron filings. Now only sand and salt remain. Step 2, add water and stir: the salt dissolves; the sand does not. Step 3, filter: pour through filter paper. Sand stays as the residue; salt water passes through as the filtrate. Step 4, evaporate: with the teacher, heat the salt water in a china dish, or leave it in the sun, until the water is gone; salt is left behind. Why this order? The magnet is used first because once water is added, the filings would be wet and sticky; and the salt must be dissolved before filtering, otherwise it stays with the sand.
Separating iron filings, sand and salt
- Magnet Removes iron filings.
- Add water and stir Salt dissolves; sand does not.
- Filter Sand is the residue.
- Evaporate the filtrate Salt is left behind.
Worked example 2: choose the method
(a) Chalk powder mixed with water: chalk does not dissolve and particles are fine, so filtration. (b) Seeds stuck in a glass of watermelon juice: big and few, so a strainer (filtration) or simply handpicking. (c) Small pebbles in a bag of sand: sieving. (d) Water from a mixture of oil and water: let it stand, then decant the oil. Method: always ask which property is different between the components, then pick the method that uses it.
Key takeaways: a magnet separates magnetic materials like iron from non-magnetic ones, which is useful in workshops and in recycling. Choose a method by finding the property that differs. For mixtures with several components, combine methods in a sensible order, thinking about how each step affects the next.
Check your understanding
-
1. Which mixture can be separated by magnetic separation?
- Salt and sand
- Iron nails and sawdust
- Oil and water
- Husk and grain
Show answer
Answer: B. Iron nails are attracted by a magnet and sawdust is not, so a magnet separates them.
-
2. How do scrap yards use magnetic separation?
- To dissolve iron
- To make plastic magnetic
- To melt glass
- To lift iron and steel out of mixed waste for recycling
Show answer
Answer: D. Large magnets, often on cranes, pick out iron and steel from heaps of waste so it can be recycled.
-
3. Chalk powder is mixed with water. Which method separates the chalk?
- Filtration
- Winnowing
- Magnetic separation
- Churning
Show answer
Answer: A. Chalk is an insoluble solid in a liquid, so it can be separated by filtration (it stays as residue).
-
4. Sand and salt are mixed. After adding water and stirring, what is the next step to remove the sand?
- Use a magnet
- Winnow it
- Filter the mixture
- Churn it
Show answer
Answer: C. The salt has dissolved; filtering keeps the insoluble sand on the filter paper while salt water passes through.
-
5. Why is the magnet used before water is added when separating iron filings, sand and salt?
- Water makes iron non-magnetic
- Dry filings come away cleanly; wet filings are messy and stick to sand
- Salt is magnetic when dry
- Magnets do not work at all near water
Show answer
Answer: B. The magnet works best on the dry mixture, where filings separate cleanly. Once wet, they clump with sand and are harder to remove.
Sign in to keep track of the lessons you finish.