Revision notes

Chapter 9 Methods of Separation in Everyday Life: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Mixtures, why we separate them, and handpicking

A mixture is formed when two or more substances are mixed together. Each substance in it is a component, and components can be separated using differences in their properties.

Two reasons for separating

  • Remove an unwanted or harmful part
    • Stones from rice or dal
    • Husk from grain
    • Mud from water
  • Obtain a useful part (or keep both)
    • Butter from curd
    • Salt from seawater
    • Grain from stalks
Deciding whether to handpick
MixtureHandpick?Reason
A few stones in a kilogram of riceYesStones are few and look different
A cup of green chillies mixed in a cup of beansYesBig pieces, easy to see
Fine sand mixed with saltNoParticles are tiny and too many
Husk mixed in a heap of threshed wheatNoFar too much husk to pick by hand

Key takeaways: a mixture contains two or more components that can be separated by using differences in their properties. We separate to remove unwanted parts or to obtain useful ones. Handpicking uses differences in size, colour and shape and is suitable when the part to remove is small in amount and easy to pick.

Read the full lesson

Lesson 2

From field to kitchen: threshing, winnowing and sieving

Winnowing separates the heavier and lighter components of a mixture using wind or blowing air.

From stalk to clean grain

  1. Harvest and dry Cut stalks are dried in the sun.
  2. Threshing Beat stalks so grains fall off.
  3. Winnowing Wind blows away light husk; heavy grain falls close.
  4. Clean grain Ready to be stored or ground.
Which method?
MixtureMethodProperty used
Husk with rice grainsWinnowingHusk is much lighter
Pebbles with sandSievingPebbles are much bigger
Peanut skins with peanutsWinnowing (blowing)Skins are lighter
Bran with flourSievingBran flakes are bigger

Key takeaways: threshing separates grain from stalks; winnowing uses wind to separate heavy grain from light husk; sieving separates solid particles of different sizes, and the holes must be between the two sizes. Threshers do threshing and winnowing together. Choose winnowing for differences in weight and sieving for differences in size.

Read the full lesson

Lesson 3

Evaporation, sedimentation and decantation

Evaporation can separate a solid dissolved in a liquid: the liquid changes into vapour and the solid is left behind.

Sedimentation then decantation

  1. Leave the mixture undisturbed Do not stir or shake it.
  2. Sedimentation The heavier insoluble solid settles at the bottom.
  3. Decantation Gently tilt and pour off the liquid above.
  4. Separated Liquid in one vessel; sediment left in the other.

Sedimentation: the heavier insoluble component settles at the bottom of a liquid. Decantation: pouring off the liquid by tilting the vessel without disturbing the settled part.

Key takeaways: evaporation recovers a dissolved solid, such as salt from seawater, by turning the liquid into vapour. Sedimentation lets heavy insoluble solids settle; decantation pours off the liquid above. Decantation also separates oil from water, but it is quick rather than complete.

Read the full lesson

Lesson 4

Filtration and churning

Filtration separates insoluble solid particles from a liquid by passing the mixture through a filter. The solid left on the filter is the residue; the clear liquid that passes through is the filtrate.

Filters and what they can hold back
FilterSize of poresGood for
Tea strainerLargeTea leaves, seeds from juice
Muslin or cotton clothSmallerPaneer from whey, coarse dirt from water
Filter paperVery fineFine mud or chalk from water

Filtration

  1. Mixture poured in Liquid with insoluble solid particles.
  2. Filter Pores smaller than the particles.
  3. Residue Solid that stays on the filter.
  4. Filtrate Clear liquid that passes through.

Key takeaways: filtration separates insoluble solids from a liquid; the solid kept back is the residue and the liquid passing through is the filtrate. Filters range from strainers to cloth to filter paper, and the pore size must be smaller than the particles. Filtration does not remove dissolved substances. Churning separates lighter butter from curd, leaving buttermilk.

Read the full lesson

Lesson 5

Magnetic separation and choosing the right methods

Magnetic separation is the separation of magnetic substances (such as iron) from non-magnetic ones using a magnet.

Match the method to the property that differs
Property that differsMethodExample
Size, colour, shape (few pieces)HandpickingStones from dal
Weight (heavy and light solids)WinnowingHusk from grain
Particle sizeSievingBran from flour
Solid dissolved in liquidEvaporationSalt from salt water
Heavy insoluble solid in liquid, or two liquids that form layersSedimentation and decantationTea leaves from tea; oil from water
Insoluble solid in liquidFiltrationMud from water
Magnetic and non-magneticMagnetic separationIron nails from sawdust

Methods of separation

  • Solid from solid
    • Handpicking
    • Threshing and winnowing
    • Sieving
    • Magnetic separation
  • Solid from liquid
    • Sedimentation and decantation
    • Filtration
    • Evaporation (dissolved solid)
  • Liquid from liquid
    • Decantation (oil and water)
  • Fat from curd
    • Churning

Separating iron filings, sand and salt

  1. Magnet Removes iron filings.
  2. Add water and stir Salt dissolves; sand does not.
  3. Filter Sand is the residue.
  4. Evaporate the filtrate Salt is left behind.

Key takeaways: a magnet separates magnetic materials like iron from non-magnetic ones, which is useful in workshops and in recycling. Choose a method by finding the property that differs. For mixtures with several components, combine methods in a sensible order, thinking about how each step affects the next.

Read the full lesson

Privacy · Terms · Refunds · Delivery