- Foundation
- About 25 min
- 15 practice questions
Final self-assessment: Exploring mixtures and their separation
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions in one sitting of about 25 minutes. Write down your working for the calculations and your reason for each choice. The questions mix ideas from all five lessons and are a little harder than the lesson checks. Check the answers only after you finish, and read every explanation.
Final self-assessment
-
1. Which list contains only heterogeneous mixtures?
- Sugar solution, vinegar, soda water
- Muddy water, oil and water, smoke
- Brass, salt solution, air
- Vinegar, muddy water, brass
Show answer
Answer: B. Muddy water, oil with water and smoke all have parts spread unevenly (particles or droplets in another substance). Sugar solution, vinegar, soda water, salt solution, air and brass are homogeneous, so every other list contains at least one homogeneous mixture.
-
2. Asha dissolves 15 g of sugar in 85 g of water; Bilal dissolves 24 g of sugar in 96 g of water. Which statement is correct?
- Asha 15% m/m, Bilal 20% m/m, so Bilal's solution is more concentrated
- Asha 17.6% m/m, Bilal 25% m/m, so Bilal's solution is more concentrated
- Both solutions are 15% m/m
- Asha's solution is more concentrated because it uses less water
Show answer
Answer: A. Asha: 15 ÷ (15 + 85) × 100 = 15 ÷ 100 × 100 = 15%. Bilal: 24 ÷ (24 + 96) × 100 = 24 ÷ 120 × 100 = 20%. Bilal's solution has more solute in each 100 g of solution, so it is more concentrated. Dividing by the water alone gives the wrong values 17.6% and 25%.
-
3. How much acetic acid is in 400 mL of vinegar labelled 5% v/v acetic acid?
- 5 mL
- 80 mL
- 20 mL
- 50 mL
Show answer
Answer: C. 5% v/v means 5 mL of acetic acid in every 100 mL of vinegar. In 400 mL: 5 × (400 ÷ 100) = 5 × 4 = 20 mL.
-
4. Using the practice data for substance P (20 °C: 30 g, 80 °C: 90 g per 100 g water), a solution saturated at 80 °C in 50 g of water is cooled to 20 °C. What mass of crystals forms?
- 60 g
- 45 g
- 15 g
- 30 g
Show answer
Answer: D. At 80 °C, 50 g of water holds 90 × 0.5 = 45 g. At 20 °C it holds 30 × 0.5 = 15 g. Crystals = 45 g − 15 g = 30 g. The 60 g answer forgets that only 50 g of water was used.
-
5. Assertion: The solubility of carbon dioxide in water is greater in a cold drink than in a warm one. Reason: The solubility of gases in liquids generally decreases as temperature rises.
- Both are true and the reason correctly explains the assertion
- Both are true but the reason does not explain the assertion
- The assertion is true but the reason is false
- The assertion is false but the reason is true
Show answer
Answer: A. Gases dissolve less as liquids get warmer; that general rule is exactly why a cold drink holds more carbon dioxide than a warm one. Both statements are true and the reason explains the assertion.
-
6. A hot saturated solution of a solid is divided into two equal parts. Part 1 is cooled slowly at room temperature; part 2 is cooled quickly in ice-cold water. What is the most likely result?
- Part 2 gives larger, better-shaped crystals
- Neither part gives crystals
- Part 1 gives larger, better-shaped crystals
- Both give a liquid layer, not crystals
Show answer
Answer: C. Slow, undisturbed cooling gives particles time to arrange themselves in a regular pattern, so fewer but larger and better-shaped crystals grow. Rapid cooling produces many small, poorly formed crystals.
-
7. Liquids X (boiling point 70 °C) and Y (boiling point 105 °C) mix completely. Which statement about separating them is correct?
- Use a separating funnel, collecting Y first
- Use simple distillation; X distils over first
- Use simple distillation; Y distils over first
- They cannot be separated
Show answer
Answer: B. Miscible liquids cannot be separated by a separating funnel. Their boiling points differ by 105 − 70 = 35 °C, more than about 25 °C, so simple distillation works, and the lower-boiling liquid X vaporises and is collected first.
-
8. Which statement about evaporation, crystallization and distillation is correct?
- Evaporation recovers both the solute and the solvent
- Distillation recovers only the solute
- Crystallization and evaporation are exactly the same process
- Distillation recovers the solvent as well, while open evaporation loses it to the air
Show answer
Answer: D. In open evaporation the solvent escapes as vapour and only the solute is kept. Distillation condenses the vapour, so the solvent is also recovered. Crystallization gives pure crystals from a saturated solution, usually on cooling, and is not the same as simply drying the solution.
-
9. In a paper chromatography experiment, a student lets the solvent level stand above the ink spot. What will happen?
- The ink will dissolve into the solvent pool instead of moving up the paper as separate spots
- The separation will be faster and clearer
- The pencil line will dissolve
- Nothing different will happen
Show answer
Answer: A. If the spot is under the solvent surface, the dyes wash out into the liquid in the jar. The spot must be above the solvent so the rising solvent carries the dyes up the paper, where they separate.
-
10. A mixture contains chalk powder, sugar and camphor. Which order of steps separates all three?
- Filter, then sublime, then dissolve in water
- Sublime the camphor, then stir the rest into water and filter off the chalk, then evaporate the filtrate to get sugar
- Evaporate, then filter, then sublime
- Use a separating funnel, then sublime
Show answer
Answer: B. Gentle heating makes camphor sublime and collect as a solid on a cool surface. The chalk and sugar left behind are stirred into water: sugar dissolves and chalk is filtered off. Evaporating the water from the filtrate leaves the sugar.
-
11. Two immiscible liquids of exactly the same density are shaken in a separating funnel and left to stand. What would you expect?
- A sharp layer with the first liquid always on top
- The liquids would react
- Clear layers would not form easily, so the funnel would not separate them well
- They would become miscible
Show answer
Answer: C. Layers form because the less dense liquid rises and the denser one sinks. With equal densities there is no such push, so the droplets stay mixed through each other and a separating funnel cannot do its job well.
-
12. Which method best separates very fine clay particles that keep tap water cloudy even after filtering through cloth?
- Sublimation
- Paper chromatography
- Adding alum (coagulation), letting the lumps settle, then decanting
- Fractional distillation
Show answer
Answer: C. The particles are too fine for cloth to catch. Alum makes them clump into larger lumps that settle, after which the clear water is poured off or filtered. Centrifugation would also work in a laboratory.
-
13. A sample of an alloy of 150 g is 80% copper by mass, the rest being tin. What is the mass of tin?
- 30 g
- 120 g
- 80 g
- 20 g
Show answer
Answer: A. Copper = 80% of 150 g = 0.8 × 150 = 120 g. Tin = 150 g − 120 g = 30 g (that is, 20% of 150 g). Copper and tin together make bronze.
-
14. Assertion: Diluted milk shows the Tyndall effect. Reason: Milk is a colloid whose particles are large enough to scatter light.
- Both are true and the reason explains the assertion
- Both are true but the reason does not explain the assertion
- The assertion is false but the reason is true
- The assertion is true but the reason is false
Show answer
Answer: A. Milk is a colloid with particles of 1 to 1000 nm. Particles of this size scatter light, which is exactly why the beam is visible: both statements are true and the reason explains the assertion.
-
15. Which of these is a water-in-oil emulsion?
- Milk
- Vinegar
- Cold cream
- Smoke
Show answer
Answer: C. In cold cream (like butter), tiny water droplets are spread through oil or fat, so it is a water-in-oil emulsion. Milk is oil-in-water, vinegar is a true solution and smoke is solid particles in air.
Questions 1-3: lesson 1 (kinds of mixtures and concentration). Questions 4-6: lesson 2 (solubility and crystallization). Questions 7-9: lesson 3 (distillation and chromatography). Questions 10-13: lesson 4 (separating funnel, sublimation, coagulation and alloys). Questions 14-15: lesson 5 (colloids, the Tyndall effect and emulsions).
Sign in to keep track of the lessons you finish.