- Foundation
- About 16 min
- 5 practice questions
Solubility, solubility curves and crystallization
Explain solubility and saturated solutions, read a solubility table or curve, and use crystallization to calculate how much solid separates when a hot saturated solution cools.
If something looks wrong, please tell us.
By the end of this lesson you can
- Define solubility and a saturated solution, and say how temperature changes the solubility of solids and gases.
- Read a solubility curve or table and find how much solute a given mass of water can hold.
- Describe crystallization and calculate the mass of crystals formed on cooling.
Keep adding sugar to a glass of water and stirring. At first it all disappears, but after a point extra sugar just sits at the bottom. The water has taken in as much as it can. This limit, called solubility, is not fixed: warm the water and more sugar dissolves. Chemists use this behaviour to obtain pure crystals from impure mixtures.
Solubility and saturated solutions
The solubility of a substance is the maximum mass of it that can dissolve in a fixed amount of solvent (usually 100 g of water) at a given temperature. A solution that cannot dissolve any more solute at that temperature is a saturated solution. One that can still dissolve more is unsaturated.
- For most solids dissolving in a liquid, solubility generally increases as temperature rises. Hot tea dissolves sugar faster and holds more of it than cold water.
- For gases dissolving in a liquid, solubility generally decreases as temperature rises. A warm bottle of soda goes flat faster, and warm water holds less dissolved oxygen.
- Some solids change only a little. The solubility of common salt in water hardly changes between cold and hot water.
Solubility = the maximum mass of solute that dissolves in 100 g of solvent at a stated temperature. Always mention the temperature.
Reading a solubility table or curve
A graph of solubility (on the y-axis) against temperature (on the x-axis) is a solubility curve. Each substance has its own curve. A steep curve means the solubility rises quickly with temperature; a nearly flat curve means it hardly changes. The same information can be given as a table. The values below are made-up practice values for an imaginary substance P.
| Temperature (°C) | 20 | 40 | 60 | 80 |
|---|---|---|---|---|
| Solubility of P (g per 100 g water) | 30 | 45 | 65 | 90 |
Worked example 1: saturated or not?
A student has 20 g of P in 50 g of water at 40 °C. Is the solution saturated?
At 40 °C, 100 g of water can hold 45 g of P, so 50 g of water can hold 45 × (50 ÷ 100) = 22.5 g. The student has only 20 g, which is less than 22.5 g. So the solution is unsaturated; it can dissolve 22.5 − 20 = 2.5 g more at this temperature.
Crystallization
What happens if a solution saturated at a high temperature is cooled? At the lower temperature the water can hold less solute, so the extra solute comes out of the solution as a pure solid. Very often it separates as crystals: solids whose particles are arranged in a regular, repeating geometric pattern. Rock salt, mishri (candy sugar), snowflakes and frost are crystals.
The process of obtaining pure crystals from a saturated solution is crystallization. It works because the solubility of the substance changes with temperature, while small amounts of impurities stay dissolved in the leftover liquid. So crystallization is used to purify solids, for example in making sugar from cane juice and in preparing pure chemicals in laboratories.
Purifying a solid by crystallization
- Dissolve in hot solvent Add the impure solid to hot water until no more dissolves (saturated solution).
- Filter while hot Insoluble dirt stays on the filter paper.
- Cool slowly Cover and leave undisturbed; crystals form as solubility falls.
- Filter the crystals Soluble impurities stay behind in the liquid.
- Rinse and dry Wash with a little cold water and dry on filter paper.
Slow, undisturbed cooling gives the particles time to settle into place, so the crystals are larger and better shaped. Fast cooling, for example in ice-cold water, gives many small crystals. If you try growing crystals of salt, sugar or alum at home, do it with an adult: hot solutions can scald. Some laboratory salts, such as copper sulfate, are poisonous and must be handled only under a teacher's supervision and never with bare hands.
Worked example 2: mass of crystals on cooling
A solution of P saturated at 80 °C is made with 100 g of water. It is cooled to 40 °C. How much P crystallizes?
P dissolved at 80 °C = 90 g. P that can stay dissolved at 40 °C = 45 g. Crystals formed = 90 g − 45 g = 45 g.
Worked example 3: a different mass of water
A saturated solution of P is made at 60 °C using 50 g of water and then cooled to 20 °C. Find the mass of crystals.
At 60 °C: 65 × (50 ÷ 100) = 32.5 g dissolves. At 20 °C: 30 × (50 ÷ 100) = 15 g stays dissolved. Crystals = 32.5 g − 15 g = 17.5 g.
Salt from sea water
Because the solubility of common salt barely changes with temperature, cooling sea water gives almost no salt. Instead, sea water is let into shallow salt pans and the Sun and wind evaporate the water. The solution becomes more and more concentrated until it is saturated, and then salt crystals separate. Coastal communities in India have made salt from sea brine in this way for a very long time.
Key takeaways: Solubility is the most solute that 100 g of solvent can hold at a given temperature. Solids usually dissolve more when hot; gases dissolve less. When a hot saturated solution is cooled, the extra solute separates as pure crystals: this is crystallization, a method of purifying solids. Crystals in grams = solute dissolved at the higher temperature − solute that stays dissolved at the lower temperature.
Check your understanding
-
1. What is a saturated solution?
- A solution that contains only water
- A solution that can dissolve no more solute at that temperature
- Any solution that is hot
- A solution with exactly 50% solute
Show answer
Answer: B. A saturated solution already holds the maximum amount of solute that can dissolve at that temperature, so any extra solute added stays undissolved.
-
2. Using the practice data for P (40 °C: 45 g per 100 g water), how much P can dissolve in 200 g of water at 40 °C?
- 45 g
- 22.5 g
- 135 g
- 90 g
Show answer
Answer: D. Solubility is given per 100 g of water. 200 g of water is twice as much, so it can dissolve 45 × 2 = 90 g of P.
-
3. A solution of P saturated at 60 °C in 100 g of water (65 g dissolved) is cooled to 20 °C (30 g stays dissolved). What mass of P crystallizes?
- 35 g
- 30 g
- 65 g
- 95 g
Show answer
Answer: A. Crystals = mass dissolved at the higher temperature − mass that stays dissolved at the lower temperature = 65 g − 30 g = 35 g.
-
4. Why do fish in a pond sometimes come up gasping on a very hot day?
- Warm water holds less dissolved oxygen
- Warm water holds more dissolved oxygen
- Oxygen does not dissolve in water at all
- Fish need no oxygen in warm water
Show answer
Answer: A. The solubility of a gas in a liquid generally decreases as temperature rises, so warm water holds less dissolved oxygen and fish may struggle to get enough.
-
5. Common salt is obtained from sea water by evaporation rather than by cooling a hot saturated solution. Why?
- Salt is not soluble in water
- Salt sublimes on heating
- The solubility of salt changes very little with temperature, so cooling releases hardly any salt
- Cooling sea water turns the salt into a gas
Show answer
Answer: C. Crystallization by cooling needs a big drop in solubility as the temperature falls. Salt's solubility is almost the same in hot and cold water, so salt is obtained by evaporating the water until the solution is saturated and crystals form.
Sign in to keep track of the lessons you finish.