- Foundation
- About 16 min
- 5 practice questions
Kinds of mixtures and the concentration of a solution
Tell homogeneous mixtures from heterogeneous ones, name the solute and solvent, and express the concentration of a solution as % m/m, % m/v or % v/v.
If something looks wrong, please tell us.
By the end of this lesson you can
- Sort mixtures into homogeneous (uniform) and heterogeneous (non-uniform) ones with reasons.
- Name the solute and the solvent in a solution and explain what concentration means.
- Calculate mass by mass, mass by volume and volume by volume percentages, and work backwards from them.
Almost nothing around you is a pure substance. Tea, air, sea water, soil, blood and the steel of a spoon are all mixtures: two or more substances put together without forming a new substance. Because the parts keep their own properties, we can separate them, and that is how sugar comes from cane juice, salt from sea water and petrol from crude oil. This chapter studies mixtures closely and the methods used to take them apart. We begin by sorting mixtures and by learning to say exactly how strong a solution is.
Homogeneous and heterogeneous mixtures
Stir a spoon of sugar into a glass of water. After a minute you cannot see the sugar, and every sip tastes equally sweet. A mixture whose composition is the same everywhere is a homogeneous mixture, also called a solution. Lemon-flavoured water, the vinegar in a kitchen bottle and the fizzy soda in a sealed bottle (carbon dioxide dissolved in water) are other examples.
Now stir sand into water. The grains stay visible, they are not spread evenly, and they sink when you stop stirring. A mixture whose composition is not the same throughout is a heterogeneous mixture. Oil and water, a bowl of mixed dry fruits, and muddy water are heterogeneous.
Two kinds of mixtures
-
Homogeneous (solution)
- Same composition everywhere
- Parts cannot be seen separately
- Does not settle on standing
- Examples: sugar water, vinegar, soda water
-
Heterogeneous
- Composition differs from place to place
- Parts can often be seen
- Some parts may settle or form layers
- Examples: sand in water, oil and water, muddy water
Solute, solvent and concentration
In a solution, the substance that dissolves is the solute and the substance that does the dissolving is the solvent. In sugar water, sugar is the solute and water is the solvent. Water dissolves so many substances that it is often called a universal solvent, but other solvents such as alcohol and kerosene are used too.
The same solute and solvent can make a weak or a strong solution. A cup of tea with half a spoon of sugar and one with four spoons are both sugar solutions, yet they taste very different. The amount of solute present in a given amount of solution (or solvent) is called the concentration of the solution. Getting it right matters: Oral Rehydration Solution (ORS) works only when salt and sugar are mixed with water in the stated amounts, a medicine syrup must have a fixed strength, and a farmer who mixes too little pesticide in the spray tank fails to protect the crop, while too much harms the crop, the soil and the people nearby.
Three ways to write concentration as a percentage
| Method | What it tells you | Formula | Typical use |
|---|---|---|---|
| Mass by mass (% m/m) | Grams of solute in 100 g of solution | (mass of solute ÷ mass of solution) × 100 | Packaged food labels, alloys, powders |
| Mass by volume (% m/v) | Grams of solute in 100 mL of solution | (mass of solute ÷ volume of solution) × 100 | Medicines and laboratory solutions |
| Volume by volume (% v/v) | Millilitres of solute in 100 mL of solution | (volume of solute ÷ volume of solution) × 100 | A liquid mixed with another liquid, such as perfumes and vinegar |
Concentration (%) = (amount of solute ÷ amount of solution) × 100. Always divide by the whole solution (solute + solvent), not by the solvent alone.
In industry, % w/w (weight by weight) is often written in place of % m/m. The two give the same number, because the same balance compares both masses.
Worked example 1: mass by mass
Riya dissolves 15 g of sugar in 135 g of water. Find the concentration in % m/m.
Mass of solute = 15 g. Mass of solution = 15 g + 135 g = 150 g. Concentration = (15 ÷ 150) × 100 = 0.1 × 100 = 10% m/m. Check: 10% of 150 g is 15 g, which matches the sugar taken.
Worked example 2: mass by volume
A laboratory assistant dissolves 12 g of glucose in water and makes the volume up to 300 mL. Find the concentration in % m/v.
Concentration = (12 g ÷ 300 mL) × 100 = 0.04 × 100 = 4% m/v. This means every 100 mL of the solution contains 4 g of glucose.
Worked example 3: volume by volume
A floor-cleaning liquid is made by adding water to 30 mL of disinfectant until the total volume is 600 mL. Find the % v/v of disinfectant.
Concentration = (30 mL ÷ 600 mL) × 100 = 0.05 × 100 = 5% v/v.
Worked example 4: working backwards
A spice mix label says it contains 2% m/m salt. How much salt is in a 250 g packet?
2% m/m means 2 g of salt in every 100 g of mix. Salt in 250 g = (2 ÷ 100) × 250 = 5 g. So the packet holds 5 g of salt. Note that % m/m is used for heterogeneous mixtures like spice mixes and milk powder too, not only for solutions.
Key takeaways: A homogeneous mixture (solution) has the same composition throughout; a heterogeneous one does not. The solute dissolves in the solvent. Concentration tells how much solute is present, and it can be written as % m/m, % m/v or % v/v, always dividing by the amount of the whole solution.
Check your understanding
-
1. Which of these is a homogeneous mixture?
- Sugar fully dissolved in water
- Sand stirred into water
- A few drops of oil shaken with water
- Chalk powder stirred into water
Show answer
Answer: A. Dissolved sugar is spread evenly and cannot be seen, so every part of the liquid has the same composition: a homogeneous mixture (solution). Sand and chalk powder stay as visible particles that settle, and oil forms separate drops or a layer, so those three are heterogeneous.
-
2. 8 g of salt is dissolved in 32 g of water. What is the concentration of the solution in % m/m?
- 25%
- 8%
- 20%
- 40%
Show answer
Answer: C. Mass of solution = 8 g + 32 g = 40 g. Concentration = (8 ÷ 40) × 100 = 20% m/m. Dividing by the water alone (8 ÷ 32 × 100) gives 25%, a common mistake: the formula uses the mass of the whole solution.
-
3. A saline drip is 0.9% m/v sodium chloride. How much sodium chloride is present in 500 mL of it?
- 0.9 g
- 9 g
- 45 g
- 4.5 g
Show answer
Answer: D. 0.9% m/v means 0.9 g in every 100 mL. In 500 mL: 0.9 × (500 ÷ 100) = 0.9 × 5 = 4.5 g.
-
4. A perfume is made by mixing a liquid fragrance oil with a liquid solvent. Which way of expressing its concentration suits it best?
- Mass by volume percentage
- Volume by volume percentage
- Mass by mass percentage only
- It cannot be expressed as a percentage
Show answer
Answer: B. When both the solute and the solvent are liquids, it is easiest to measure both by volume, so volume by volume percentage (% v/v) is used, as for perfumes and vinegar.
-
5. Why must a farmer mix a pesticide with water in the stated proportion?
- Water changes the colour of the pesticide
- Any amount of pesticide works equally well
- Too little may not protect the crop, while too much can harm the crop, soil and environment
- Pesticides do not dissolve in water
Show answer
Answer: C. The effect depends on concentration. A spray that is too weak does not control the pests, and one that is too strong damages plants, soil and living things around. That is why the right proportion matters.
Sign in to keep track of the lessons you finish.