- Practice
- About 16 min
- 5 practice questions
Antimicrobials: antibiotic types, antiseptics, disinfectants and dilutions
Classify antibiotics as bactericidal or bacteriostatic and broad or narrow spectrum, match antiseptics and disinfectants, and solve dilution and ppm problems.
If something looks wrong, please tell us.
Antimicrobial questions test two lists of names and two calculation types. The lists are bactericidal versus bacteriostatic and broad versus narrow spectrum antibiotics; the calculations are dilution of an antiseptic and parts-per-million dosing of a disinfectant. This lesson covers both, building on the drug-action ideas of lesson 1.
The history in three names
Paul Ehrlich developed salvarsan, an arsenic compound, for syphilis. He noticed a structural likeness between it and azo dyes (–As=As– in salvarsan, –N=N– in azo dyes), and this led to prontosil, a dye that the body converts into sulphanilamide, the active compound. A wide range of sulpha drugs followed. Penicillin from a mould, found by Alexander Fleming, began the antibiotic era.
Two ways to describe an antibiotic
| Bactericidal (kill) | Bacteriostatic (inhibit growth) |
|---|---|
| Penicillin | Erythromycin |
| Aminoglycosides | Tetracycline |
| Ofloxacin | Chloramphenicol |
Broad-spectrum antibiotics act on a wide range of Gram-positive and Gram-negative bacteria: chloramphenicol, ampicillin and amoxycillin (the last two are synthetic modifications of penicillin) and ofloxacin. Narrow-spectrum antibiotics act mainly on one group; penicillin G is the standard example. Trap: chloramphenicol is bacteriostatic and broad-spectrum; penicillin is bactericidal but (as penicillin G) narrow-spectrum. The two classifications are independent, so check each word in a statement separately.
Antiseptics and disinfectants
Antiseptics go on living tissue: furacine and soframycin for wounds, Dettol (chloroxylenol and terpineol), bithionol added to soaps, tincture of iodine (2-3% iodine in alcohol-water), iodoform for wounds, and dilute boric acid for eyes. Disinfectants go on inanimate objects. Phenol is the classic dual case: 0.2% antiseptic, 1% disinfectant. Chlorine at 0.2 to 0.4 ppm disinfects drinking water, and sulphur dioxide in very low concentration is also a disinfectant.
Worked example 1: dilution
A lab has 1% phenol. How do you make 250 mL of 0.2% antiseptic solution? Use C1V1 = C2V2: 1 × V1 = 0.2 × 250, so V1 = 50 mL. Take 50 mL of 1% phenol and add 200 mL of water. Check: 50 mL of 1% contains 0.5 g phenol; 0.5 g in 250 mL is 0.2%. Trap options often give 50 mL of water instead of 50 mL of stock.
Worked example 2: ppm dosing
A village tank holds 20,000 L of water. How much chlorine is needed for 0.3 ppm by mass? Mass of water = 20,000 kg = 2 × 10⁷ g. Chlorine = 0.3 × 2 × 10⁷ ÷ 10⁶ = 6 g. Speed method: for water, 1 ppm is 1 mg per litre, so 0.3 mg/L × 20,000 L = 6000 mg = 6 g.
Bactericidal: penicillin, aminoglycosides, ofloxacin. Bacteriostatic: erythromycin, tetracycline, chloramphenicol. In water, 1 ppm = 1 mg per litre. C1V1 = C2V2 for dilutions.
Key takeaways
- Prontosil is converted in the body to sulphanilamide.
- Spectrum and killing action are separate classifications.
- Bithionol gives soaps antiseptic properties.
- Chlorine at 0.2-0.4 ppm makes drinking water safe.
Check your understanding
-
1. Which antibiotic is bacteriostatic?
- Penicillin
- Ofloxacin
- Aminoglycosides
- Tetracycline
Show answer
Answer: D. Tetracycline (with erythromycin and chloramphenicol) is bacteriostatic; the other three are bactericidal.
-
2. Prontosil acts in the body after being converted into:
- Sulphanilamide
- Salvarsan
- Penicillin
- Aspirin
Show answer
Answer: A. Prontosil is a dye that is metabolised to sulphanilamide, the active antibacterial compound.
-
3. To make 500 mL of 0.2% phenol from 1% phenol, the volume of 1% solution needed is:
- 50 mL
- 200 mL
- 100 mL
- 400 mL
Show answer
Answer: C. C1V1 = C2V2: 1 × V1 = 0.2 × 500, V1 = 100 mL, made up to 500 mL with 400 mL water.
-
4. How much chlorine gives 0.2 ppm in 5000 L of water?
- 10 g
- 1 g
- 0.1 g
- 100 g
Show answer
Answer: B. 1 ppm = 1 mg/L, so 0.2 mg/L × 5000 L = 1000 mg = 1 g.
-
5. Which statement is correct?
- Chloramphenicol is narrow-spectrum and bactericidal
- Penicillin G is broad-spectrum
- Chloramphenicol is broad-spectrum and bacteriostatic
- Ofloxacin is bacteriostatic
Show answer
Answer: C. Chloramphenicol acts on many bacteria (broad-spectrum) and inhibits rather than kills (bacteriostatic). Penicillin G is narrow-spectrum; ofloxacin is bactericidal.
Sign in to keep track of the lessons you finish.