• Practice
  • About 17 min
  • 5 practice questions

Cleansing agents: soap types, saponification and detergent numbers

Calculate soap and glycerol yields from saponification, the soap wasted by hard water, and classify soaps and detergents by structure and use.

If something looks wrong, please tell us.

Cleansing agents close the topic with both recall and calculation. Recall questions match a soap or detergent to its type or use; calculation questions ask how much soap a fat gives or how much soap hard water destroys. This lesson builds on the micelle idea, and its calculations use the same mole method as the antacid problems of lesson 2.

Saponification by numbers

A typical fat is glyceryl tristearate (tristearin), C57H110O6, molar mass 890 g/mol. With sodium hydroxide: C57H110O6 + 3NaOH → 3C17H35COONa + C3H5(OH)3. Molar masses: NaOH 40, sodium stearate 306, glycerol 92. Check the mass balance: 890 + 3 × 40 = 1010, and 3 × 306 + 92 = 1010. One mole of fat needs three moles of alkali and gives three moles of soap.

Worked example 1

How much sodium stearate, glycerol and sodium hydroxide are involved when 89 kg of tristearin is saponified completely? Moles of fat = 89,000 ÷ 890 = 100 mol. Soap = 300 mol × 306 g = 91.8 kg. Glycerol = 100 mol × 92 g = 9.2 kg. NaOH = 300 mol × 40 g = 12 kg. Check: 89 + 12 = 101 kg in, 91.8 + 9.2 = 101 kg out. Glycerol is a valuable by-product, used for example in shaving soaps.

Hard water arithmetic

Calcium ions remove soap as scum: 2C17H35COONa + Ca²⁺ → (C17H35COO)2Ca + 2Na⁺. Each calcium ion wastes two soap molecules. Calcium stearate has molar mass 2 × 283 + 40 = 606 g/mol (the stearate ion C17H35COO⁻ is 283).

Worked example 2

A bucket of water contains 0.4 g of calcium ions. How much sodium stearate is wasted as scum before any lather forms, and how much scum forms? Moles Ca²⁺ = 0.4 ÷ 40 = 0.01 mol. Soap wasted = 2 × 0.01 = 0.02 mol × 306 = 6.12 g. Scum = 0.01 mol × 606 = 6.06 g. With a detergent such as sodium dodecylbenzenesulphonate, the calcium salt is soluble and nothing is wasted.

Kinds of soap

Kinds of soap
SoapHow it is made or what is addedPurpose
Toilet soapBetter grade fats and oils, excess alkali removed; colour and perfume addedGentle on skin
Transparent soapSoap dissolved in ethanol, then the solvent evaporatedAppearance
Floating soapAir bubbles beaten in before hardeningFloats in the bath
Medicated soapSubstances of medicinal value, e.g. bithionol, addedAntiseptic action
Shaving soapContains glycerol to prevent rapid drying; rosin gum addedLong-lasting lather
Laundry soapFillers such as sodium rosinate, sodium silicate, borax, sodium carbonateCleaning and lather

Potassium soaps are softer than sodium soaps. Detergents are anionic (sodium dodecylbenzenesulphonate in household detergents, sodium lauryl sulphate in toothpastes), cationic (cetyltrimethylammonium bromide in hair conditioners, germicidal, expensive) or non-ionic (esters of stearic acid with polyethyleneglycol, in liquid dishwashing detergents). Highly branched hydrocarbon chains resist bacterial breakdown and cause foaming in rivers; linear chains are biodegradable.

Fat + 3NaOH → 3 soap + glycerol (890 + 120 = 918 + 92). Each Ca²⁺ wastes 2 soap molecules. Glycerol in shaving soap; bithionol in medicated soap; ethanol for transparent soap; air for floating soap.

Key takeaways

  • Mass balance is a fast check on any saponification answer.
  • Hard-water waste: moles of soap = 2 × moles of Ca²⁺ or Mg²⁺.
  • Non-ionic detergents come from stearic acid and polyethyleneglycol.
  • Linear-chain detergents are biodegradable; branched ones are not.

Check your understanding

  1. 1. Saponifying 1 mol of tristearin requires how many moles of NaOH?

    1. 1
    2. 2
    3. 3
    4. 6
    Show answer

    Answer: C. Each of the three ester groups needs one NaOH: 3 mol, giving 3 mol of soap and 1 mol of glycerol.

  2. 2. Mass of glycerol obtained from 178 kg of tristearin (890 g/mol) is:

    1. 18.4 kg
    2. 9.2 kg
    3. 36.8 kg
    4. 92 kg
    Show answer

    Answer: A. 178,000 ÷ 890 = 200 mol of fat, giving 200 mol of glycerol × 92 g = 18.4 kg.

  3. 3. Water containing 0.2 g of Ca²⁺ wastes how much sodium stearate (306 g/mol)?

    1. 1.53 g
    2. 6.12 g
    3. 0.306 g
    4. 3.06 g
    Show answer

    Answer: D. Ca²⁺ = 0.2 ÷ 40 = 0.005 mol; soap wasted = 2 × 0.005 = 0.01 mol × 306 = 3.06 g.

  4. 4. Transparent soaps are made by:

    1. Beating air into soap
    2. Dissolving soap in ethanol and evaporating the solvent
    3. Adding glycerol
    4. Adding sodium silicate
    Show answer

    Answer: B. Dissolving soap in ethanol and evaporating the excess solvent gives transparent soap. Air gives floating soap.

  5. 5. Liquid dishwashing detergents are usually:

    1. Non-ionic, from stearic acid and polyethyleneglycol
    2. Cationic quaternary ammonium salts
    3. Potassium soaps
    4. Sodium lauryl sulphate only
    Show answer

    Answer: A. Non-ionic detergents, such as esters of stearic acid with polyethyleneglycol, are used in liquid dishwashing.

Privacy · Terms · Refunds · Delivery