- Practice
- About 15 min
- 5 practice questions
Fuel calculations: heat, calorific value and carbon dioxide produced
Solve numerical problems on heat from burning fuels, amounts of fuel and air needed, and the carbon dioxide formed by complete combustion.
If something looks wrong, please tell us.
Fuel questions combine three simple tools: heat = mass x specific heat x temperature rise, heat released = mass of fuel x calorific value, and the balanced equation for combustion. Once you can move between these, most numerical questions are routine.
The three tools
- Heat absorbed by water: q = m x c x delta T, with c = 4.18 J per gram per degree for water.
- Heat from fuel: q = mass of fuel x calorific value, multiplied by the efficiency if some heat is lost.
- Combustion equation: balance it, then use molar masses to link the mass of fuel to the mass of CO2, H2O or O2.
Heat needed = heat supplied x efficiency. Mass of CO2 = (moles of carbon in the fuel) x 44.
Worked example 1: heating water. A fuel has a calorific value of 50,000 kJ/kg (an illustrative figure). How much is needed to heat 10 kg of water from 20 to 100 degrees C if only half of the heat reaches the water? Working: q = 10,000 g x 4.18 x 80 = 3,344,000 J = 3344 kJ. Heat the fuel must supply = 3344 / 0.50 = 6688 kJ. Mass of fuel = 6688 / 50,000 = 0.134 kg, about 134 g.
Worked example 2: carbon dioxide from propane. The equation is C3H8 + 5O2 gives 3CO2 + 4H2O. Propane has a molar mass of 44, and carbon dioxide has 44. One mole of propane (44 g) gives 3 moles of CO2 (132 g). So 1 kg of propane produces 3 kg of CO2. By the same method, methane (16 g/mol) gives 44 g of CO2 per 16 g, or 2.75 kg of CO2 per kilogram of methane; and 1 kg of pure carbon gives 44/12 = 3.67 kg of CO2.
Worked example 3: air needed. What volume of air is needed to burn 1 mole of propane completely, measured at 273 K and 1 atm, where 1 mole of gas occupies 22.4 L and air is about 21 per cent oxygen by volume? Working: 1 mole of propane needs 5 moles of O2. The moles of air = 5 / 0.21 = 23.8 mol. Volume = 23.8 x 22.4 = about 533 L.
Worked example 4: incomplete combustion. If 32 g of methane burns incompletely to carbon monoxide by 2CH4 + 3O2 gives 2CO + 4H2O, how much CO forms? Working: 32 g is 2 moles of methane. From the equation 2 moles of CH4 give 2 moles of CO, so 2 x 28 = 56 g of CO. With complete burning the same methane would give 2 x 44 = 88 g of CO2, and CO would not form.
Comparing fuels
| Fuel | Equation | CO2 per kg of fuel |
|---|---|---|
| Methane | CH4 + 2O2 gives CO2 + 2H2O | 44/16 = 2.75 kg |
| Propane | C3H8 + 5O2 gives 3CO2 + 4H2O | 132/44 = 3.0 kg |
| Butane | 2C4H10 + 13O2 gives 8CO2 + 10H2O | 176/58 = 3.03 kg |
| Carbon | C + O2 gives CO2 | 44/12 = 3.67 kg |
A fuel with more hydrogen relative to carbon produces less CO2 per kilogram, and also usually has a higher calorific value, because hydrogen is also a good fuel and gives only water.
Traps
- Forgetting to multiply by the efficiency, or dividing when you should multiply.
- Mixing joules and kilojoules. Convert 3,344,000 J to 3344 kJ before dividing.
- Using 22.4 L for gases at any temperature. The value applies only at 273 K and 1 atm.
- Forgetting that the CO2 mass is based on moles of carbon, not on the mass of the fuel.
Key takeaways: q = m c delta T for the water; fuel mass = heat needed / (calorific value x efficiency); use the equation and molar masses for CO2 and oxygen; air is about 21 per cent oxygen by volume.
Check your understanding
-
1. How much heat is needed to raise 10 kg of water by 80 degrees C (c = 4.18 J/g/degree)?
- 3344 kJ
- 334.4 kJ
- 41.8 kJ
- 33,440 kJ
Show answer
Answer: A. q = 10,000 x 4.18 x 80 = 3,344,000 J = 3344 kJ.
-
2. How much CO2 forms from burning 1 kg of propane completely, using C3H8 + 5O2 giving 3CO2 + 4H2O?
- 1.0 kg
- 2.0 kg
- 4.0 kg
- 3.0 kg
Show answer
Answer: D. 44 g of propane gives 132 g of CO2, so 1 kg gives 3.0 kg.
-
3. How many moles of O2 are needed to burn 2 mol of methane completely?
- 2
- 6
- 4
- 8
Show answer
Answer: C. CH4 + 2O2 gives CO2 + 2H2O, so 2 mol of methane needs 4 mol of O2.
-
4. If a stove transfers only 40 per cent of the heat to the pot, and 400 kJ must reach the pot, how much heat must the fuel supply?
- 160 kJ
- 400 kJ
- 600 kJ
- 1000 kJ
Show answer
Answer: D. Heat supplied = 400 / 0.40 = 1000 kJ.
-
5. Roughly what volume of air is needed (at 273 K, 1 atm) to supply 5 mol of O2, if air is about 21 per cent oxygen by volume?
- 112 L
- 233 L
- 533 L
- 1000 L
Show answer
Answer: C. 5 / 0.21 = 23.8 mol of air, and 23.8 x 22.4 = about 533 L.
Sign in to keep track of the lessons you finish.