• Practice
  • About 15 min
  • 5 practice questions

Polymer practice: matching monomers, types and degree of polymerisation

Answer matching and numerical questions on polymers: monomers, addition versus condensation, thermoplastics and thermosets, rubbers, and the chain-length calculation.

If something looks wrong, please tell us.

Polymer questions fall into a few patterns: name the monomer, name the polymer, classify the type, spot the odd one out, or do a short calculation. A good table and a few habits let you answer all of them quickly.

Matching table to learn

Polymers, monomers and types
PolymerMonomer(s)TypeUse
PolytheneEtheneAdditionBags, films
PolypropenePropeneAdditionRopes, crates
PVCVinyl chloride (chloroethene)AdditionPipes, cable insulation
Teflon (PTFE)TetrafluoroetheneAdditionNon-stick coatings
PolystyreneStyrene (phenylethene)AdditionPackaging foam
Nylon-6,6Hexamethylenediamine + adipic acidCondensationFibres, ropes
Terylene (PET)Ethylene glycol + terephthalic acidCondensationFibres, bottles
BakelitePhenol + formaldehydeCondensation, thermosettingSwitches, handles
Buna-SButa-1,3-diene + styreneAddition (copolymer)Tyres
Natural rubberIsoprene (2-methylbuta-1,3-diene)AdditionElastic goods

Addition polymers come from C=C monomers and lose nothing. Condensation polymers lose water (or another small molecule) at each link. Two different monomers in one chain make a copolymer.

— Rule to remember

Traps that catch students

  • PVC and Teflon both contain halogens, but the monomers differ: C2H3Cl and C2F4.
  • Bakelite is thermosetting; polythene and PVC are thermoplastic.
  • A copolymer (Buna-S) is made from two different monomers by addition polymerisation; do not call it a condensation polymer.
  • Nylon-2-nylon-6 is a biodegradable polymer, unlike nylon-6,6. Polyhydroxybutyrate-co-hydroxyvalerate (PHBV) is another biodegradable polymer.
  • Natural rubber is soft and sticky; vulcanisation with sulphur forms cross-links.

Calculations

Worked example 1: degree of polymerisation. A sample of PTFE has an average molar mass of 500,000 g/mol. The monomer C2F4 has molar mass 2 x 12 + 4 x 19 = 100. The number of repeat units n = 500,000 / 100 = 5000.

Worked example 2: mass of monomer needed. How much ethene is needed to make 14 kg of polythene if the process is 80 per cent efficient? Working: an addition polymer has the same mass as the monomers that made it, so the theoretical mass is 14 kg. At 80 per cent yield, the mass needed = 14 / 0.80 = 17.5 kg.

Worked example 3: terylene. For terylene (repeat unit 192 g/mol), which comes from ethylene glycol (62 g/mol) and terephthalic acid (166 g/mol) with the loss of two molecules of water (36 g/mol in total), how much of each reactant gives one mole of repeat units? Working: 62 g of glycol and 166 g of acid are needed. The water lost is 36 g, and 62 + 166 - 36 = 192 g, which agrees with the repeat unit mass. In a condensation polymer, the mass of the polymer is always less than the mass of the monomers put in.

Worked example 4: spot the odd one out. Among polythene, PVC, nylon-6,6 and Teflon, which is not an addition polymer? Working: polythene, PVC and Teflon all come from monomers with C=C bonds, which open and join. Nylon-6,6 comes from a diamine and a diacid with loss of water, so it is the condensation polymer and the odd one out.

Key takeaways: memorise the monomer table; classify by what is lost; n is polymer mass divided by monomer mass (for addition polymers); account for yield by dividing.

Check your understanding

  1. 1. What is the monomer of Teflon?

    1. Vinyl chloride
    2. Styrene
    3. Propene
    4. Tetrafluoroethene
    Show answer

    Answer: D. Teflon is poly(tetrafluoroethene), made from CF2=CF2.

  2. 2. Buna-S is a copolymer of which two monomers?

    1. Buta-1,3-diene and styrene
    2. Ethene and propene
    3. Phenol and formaldehyde
    4. Isoprene and sulphur
    Show answer

    Answer: A. Buna-S is made by addition copolymerisation of buta-1,3-diene and styrene.

  3. 3. A PTFE sample has molar mass 500,000 g/mol, and the monomer has molar mass 100 g/mol. What is the degree of polymerisation?

    1. 500
    2. 50,000
    3. 5000
    4. 1000
    Show answer

    Answer: C. n = 500,000 / 100 = 5000.

  4. 4. How much ethene is needed to make 14 kg of polythene at 80 per cent yield?

    1. 11.2 kg
    2. 17.5 kg
    3. 14 kg
    4. 28 kg
    Show answer

    Answer: B. The theoretical mass is 14 kg, and 14 / 0.80 = 17.5 kg.

  5. 5. Which of these is a thermosetting plastic?

    1. Polythene
    2. PVC
    3. Polystyrene
    4. Bakelite
    Show answer

    Answer: D. Bakelite sets permanently because of cross-links, so it cannot be re-moulded. The other three are thermoplastics.

Privacy · Terms · Refunds · Delivery