Revision notes

Chemistry in Daily Life: Practice

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Drug-target interactions: inhibitors, receptors and the traps

Four bases of classification
BasisUseful toExample and trap
Pharmacological effectDoctors: a full range of drugs for a problemAnalgesics, antiseptics
Drug actionGrouping by the biochemical process affectedAll antihistamines block histamine, even though histamine acts in many places
Chemical structureChemists; but similar structure does not guarantee similar actionSulphonamides share a structure
Molecular targetMedicinal chemists, most useful to themDrugs binding the same enzyme or receptor

Competitive: active site, beaten by excess substrate. Allosteric: other site, changes shape. Covalent: irreversible. Agonist: switches on. Antagonist: blocks.

  • Enzymes hold the substrate and catalyse its reaction; inhibitors interfere with either.
  • Excess substrate overcomes only competitive inhibition.
  • Receptors are specific, which is why selective drugs are possible.
  • Classification by molecular target is the most useful to medicinal chemists.
Read the full lesson

Lesson 2

Therapeutic drugs: matching questions and antacid calculations

Tranquilizers
DrugWhat it does
Iproniazid, phenelzineAntidepressants: inhibit the enzymes that break down noradrenaline, so its level stays up and mood improves
Chlordiazepoxide, meprobamateRelatively mild tranquilizers for relieving tension
EquanilUsed in controlling depression and hypertension
Barbiturates: veronal, amytal, nembutal, luminal, seconalHypnotics: sleep-producing

Cimetidine and ranitidine block histamine at stomach receptors (less acid); brompheniramine and terfenadine block it at allergy receptors. Capacity per gram: Al(OH)3 > Mg(OH)2 > CaCO3 > NaHCO3.

  • Iproniazid and phenelzine raise noradrenaline by blocking its breakdown.
  • Barbiturates are hypnotics; equanil controls depression and hypertension.
  • Aspirin's anti-clotting action is used to prevent heart attacks.
  • Norethindrone is a synthetic progesterone derivative in antifertility pills.
Read the full lesson

Lesson 3

Antimicrobials: antibiotic types, antiseptics, disinfectants and dilutions

Effect on bacteria
Bactericidal (kill)Bacteriostatic (inhibit growth)
PenicillinErythromycin
AminoglycosidesTetracycline
OfloxacinChloramphenicol

Bactericidal: penicillin, aminoglycosides, ofloxacin. Bacteriostatic: erythromycin, tetracycline, chloramphenicol. In water, 1 ppm = 1 mg per litre. C1V1 = C2V2 for dilutions.

  • Prontosil is converted in the body to sulphanilamide.
  • Spectrum and killing action are separate classifications.
  • Bithionol gives soaps antiseptic properties.
  • Chlorine at 0.2-0.4 ppm makes drinking water safe.
Read the full lesson

Lesson 4

Food chemicals: sweetener arithmetic, preservatives and antioxidants

Choosing the additive
Food problemAdditive typeExample
Mould on picklePreservativeSalt, oil, sodium benzoate
Rancid butterAntioxidantBHA
Sugar-free cold drinkArtificial sweetenerAspartame
Sugar-free baked sweetHeat-stable sweetenerSucralose
Browning of dried fruitAntioxidantSulphur dioxide, sulphite

Sugar-equivalent = sweetener mass × relative sweetness (aspartame 100, saccharin 550, sucralose 600, alitame 2000). Heat rules out aspartame. Benzoate preserves; BHT and BHA protect against oxygen.

  • Convert each sweetener to sugar-equivalent separately, then add.
  • Aspartame: dipeptide ester, unstable to heat. Sucralose: chlorinated sucrose, heat stable.
  • Sodium benzoate and salts of sorbic and propanoic acids are preservatives.
  • Antioxidants are sacrificed first because they react with oxygen faster than food.
Read the full lesson

Lesson 5

Cleansing agents: soap types, saponification and detergent numbers

Kinds of soap
SoapHow it is made or what is addedPurpose
Toilet soapBetter grade fats and oils, excess alkali removed; colour and perfume addedGentle on skin
Transparent soapSoap dissolved in ethanol, then the solvent evaporatedAppearance
Floating soapAir bubbles beaten in before hardeningFloats in the bath
Medicated soapSubstances of medicinal value, e.g. bithionol, addedAntiseptic action
Shaving soapContains glycerol to prevent rapid drying; rosin gum addedLong-lasting lather
Laundry soapFillers such as sodium rosinate, sodium silicate, borax, sodium carbonateCleaning and lather

Fat + 3NaOH → 3 soap + glycerol (890 + 120 = 918 + 92). Each Ca²⁺ wastes 2 soap molecules. Glycerol in shaving soap; bithionol in medicated soap; ethanol for transparent soap; air for floating soap.

  • Mass balance is a fast check on any saponification answer.
  • Hard-water waste: moles of soap = 2 × moles of Ca²⁺ or Mg²⁺.
  • Non-ionic detergents come from stearic acid and polyethyleneglycol.
  • Linear-chain detergents are biodegradable; branched ones are not.
Read the full lesson

Lesson 6

Polymer practice: matching monomers, types and degree of polymerisation

Polymers, monomers and types
PolymerMonomer(s)TypeUse
PolytheneEtheneAdditionBags, films
PolypropenePropeneAdditionRopes, crates
PVCVinyl chloride (chloroethene)AdditionPipes, cable insulation
Teflon (PTFE)TetrafluoroetheneAdditionNon-stick coatings
PolystyreneStyrene (phenylethene)AdditionPackaging foam
Nylon-6,6Hexamethylenediamine + adipic acidCondensationFibres, ropes
Terylene (PET)Ethylene glycol + terephthalic acidCondensationFibres, bottles
BakelitePhenol + formaldehydeCondensation, thermosettingSwitches, handles
Buna-SButa-1,3-diene + styreneAddition (copolymer)Tyres
Natural rubberIsoprene (2-methylbuta-1,3-diene)AdditionElastic goods

Addition polymers come from C=C monomers and lose nothing. Condensation polymers lose water (or another small molecule) at each link. Two different monomers in one chain make a copolymer.

— Rule to remember

Key takeaways: memorise the monomer table; classify by what is lost; n is polymer mass divided by monomer mass (for addition polymers); account for yield by dividing.

Read the full lesson

Lesson 7

Fertiliser problems: nutrient percentages, amounts and cost

Nitrogen content
CompoundMolar massNitrogen in one formula unitPercentage N
Urea, (NH2)2CO602846.7
Ammonium nitrate, NH4NO3802835.0
Ammonium sulphate, (NH4)2SO41322821.2
Diammonium phosphate, (NH4)2HPO41322821.2
Potassium nitrate, KNO31011413.9

Percentage of N = (14 x number of N atoms / molar mass) x 100. Mass of fertiliser needed = mass of N wanted / fraction of N.

— Rule to remember

Key takeaways: percent N = 14 x atoms of N / molar mass x 100; mass of fertiliser needed = mass of N divided by the fraction; use C1V1 = C2V2 for dilution; cost should be compared per kilogram of nutrient.

Read the full lesson

Lesson 8

Household chemicals: names, formulae, hydrates and quick calculations

Common names and formulae
Common nameChemical nameFormula
Baking sodaSodium hydrogencarbonateNaHCO3
Washing sodaSodium carbonate decahydrateNa2CO3.10H2O
Caustic sodaSodium hydroxideNaOH
QuicklimeCalcium oxideCaO
Slaked limeCalcium hydroxideCa(OH)2
LimestoneCalcium carbonateCaCO3
GypsumCalcium sulphate dihydrateCaSO4.2H2O
Plaster of ParisCalcium sulphate hemihydrateCaSO4.1/2H2O
Bleaching powderCalcium oxychlorideCaOCl2

Washing soda has 10 water molecules (Na2CO3.10H2O). Gypsum has 2 (CaSO4.2H2O). Plaster of Paris has half a water molecule (CaSO4.1/2H2O).

— Rule to remember

Key takeaways: know the names table, the water of crystallisation in each hydrate, and the ratio of NaHCO3 to CO2 in the reaction you are asked about.

Read the full lesson

Lesson 9

Fuel calculations: heat, calorific value and carbon dioxide produced

Heat needed = heat supplied x efficiency. Mass of CO2 = (moles of carbon in the fuel) x 44.

— Rule to remember
Carbon dioxide per kilogram of fuel (from the equations)
FuelEquationCO2 per kg of fuel
MethaneCH4 + 2O2 gives CO2 + 2H2O44/16 = 2.75 kg
PropaneC3H8 + 5O2 gives 3CO2 + 4H2O132/44 = 3.0 kg
Butane2C4H10 + 13O2 gives 8CO2 + 10H2O176/58 = 3.03 kg
CarbonC + O2 gives CO244/12 = 3.67 kg

Key takeaways: q = m c delta T for the water; fuel mass = heat needed / (calorific value x efficiency); use the equation and molar masses for CO2 and oxygen; air is about 21 per cent oxygen by volume.

Read the full lesson

Privacy · Terms · Refunds · Delivery