• Foundation
  • About 15 min
  • 5 practice questions

Choosing fuels wisely and putting out fires

Calculate the mass and cost of fuel needed for a heating job, explain the harmful products of burning fuels, and choose the right way to put out different fires.

If something looks wrong, please tell us.

The last lesson of this course brings together everything so far. Knowing calorific values lets you work out how much fuel a job needs and which fuel gives the most heat for your money. Knowing what burning produces explains why cleaner fuels matter. And knowing the fire triangle tells you how to put out a fire safely, which depends on what is burning.

Not all the heat is useful

When you cook, some heat goes into the pot and food, and the rest escapes to the air. The fraction of the heat released that does useful work is the efficiency of the stove or furnace, often given as a percentage. Heat that must be released = useful heat needed ÷ efficiency. Mass of fuel = heat released ÷ calorific value.

Worked example 1: fuel for a cooking job

A family needs 90,000 kJ of useful heat in a week. Their stove is 60% efficient and the fuel's calorific value is 50,000 kJ/kg. Heat to be released = 90,000 ÷ 0.60 = 150,000 kJ. Fuel needed = 150,000 ÷ 50,000 = 3 kg. If the stove were 100% efficient they would need only 1.8 kg; the difference is heat lost to the surroundings.

Worked example 2: comparing cost (illustrative prices)

Suppose fuel A has a calorific value of 45,000 kJ/kg and costs ₹90 per kg, and fuel B has 30,000 kJ/kg and costs ₹45 per kg. Heat per rupee for A = 45,000 ÷ 90 = 500 kJ. For B = 30,000 ÷ 45 ≈ 667 kJ. So B gives more heat for each rupee, even though A has the higher calorific value. A fair comparison uses heat per rupee, and also considers smoke, ash and convenience.

What burning fuels release

Burning carbon-based fuels releases carbon dioxide, which adds to the greenhouse effect and global warming. Incomplete burning releases carbon monoxide and unburnt carbon particles (soot), which harm health. Coal and diesel contain some sulfur, which burns to sulfur dioxide; with nitrogen oxides formed in hot engines, it can lead to acid rain. This is why cleaner fuels such as CNG are preferred in vehicles, and why hydrogen, which burns to water only, is attractive, though it is hard to store safely.

Putting out fires

A fire is put out by removing one or more sides of the fire triangle: cutting off the fuel, cutting off the air, or cooling the fuel below its ignition temperature. Water is the common extinguisher for burning wood and paper: it cools the fuel, and the steam formed helps keep air away. But water must not be used on electrical fires, because it conducts electricity and can give a shock, or on oil and petrol fires, because oil is lighter than water, floats on top and keeps burning, spreading the fire.

For electrical and oil fires, carbon dioxide is the best extinguisher. CO₂ is heavier than air, so it covers the fire like a blanket and cuts off oxygen; as it comes out of the cylinder it also cools the fuel; and it does not harm electrical equipment. Sand, a fire blanket or a lid on a burning pan also work by cutting off air. Before anything else, switch off the electricity or the gas supply to remove the fuel or the source.

Worked example 3: choosing the method

A pan of oil catches fire on a gas stove. Reasoning: it is an oil fire, so water would make the burning oil float and splash, spreading the fire. The right steps are to turn off the gas (removing heat and fuel supply) and cover the pan with a metal lid (cutting off air). A CO₂ extinguisher would also work. Carrying the pan or fanning the flames would make things worse.

Fuel needed = useful heat ÷ efficiency ÷ calorific value. Compare costs by heat per rupee. Never use water on electrical or oil fires; use CO₂, sand or a cover.

Key takeaways. Not all heat released is useful, so divide by efficiency. Compare fuels by heat per rupee and by how cleanly they burn. Burning releases CO₂, and with poor burning CO and soot; sulfur gives SO₂. Put out fires by removing fuel, air or heat, choosing the method to suit what is burning.

Check your understanding

  1. 1. Which is the best extinguisher for a fire in electrical wiring?

    1. Water
    2. Carbon dioxide
    3. Throwing petrol on it
    4. Fanning the fire
    Show answer

    Answer: B. CO₂ cuts off oxygen, cools, does not conduct electricity and does not damage equipment. Water conducts electricity and is dangerous here.

  2. 2. Why should water not be used on a petrol fire?

    1. Water makes petrol non-combustible
    2. Water raises the ignition temperature of petrol
    3. Petrol is lighter than water, floats on it and keeps burning, spreading the fire
    4. Water produces carbon monoxide with petrol
    Show answer

    Answer: C. Petrol floats on water, so the burning layer spreads instead of going out.

  3. 3. 60,000 kJ of useful heat is needed from a stove that is 50% efficient, using a fuel of calorific value 40,000 kJ/kg. How much fuel is needed?

    1. 3 kg
    2. 1.5 kg
    3. 6 kg
    4. 0.75 kg
    Show answer

    Answer: A. Heat released = 60,000 ÷ 0.5 = 120,000 kJ. Fuel = 120,000 ÷ 40,000 = 3 kg.

  4. 4. Suppose a fuel has calorific value 48,000 kJ/kg and costs ₹60 per kg. How much heat does it give per rupee?

    1. 48 kJ
    2. 0.00125 kJ
    3. 2,880,000 kJ
    4. 800 kJ
    Show answer

    Answer: D. Heat per rupee = 48,000 ÷ 60 = 800 kJ.

  5. 5. Which is an advantage of hydrogen as a fuel?

    1. It is very easy to store
    2. It produces soot when it burns
    3. It has a very high calorific value and burns to water only
    4. It contains sulfur
    Show answer

    Answer: C. Hydrogen gives more heat per kilogram than common fuels and its only product is water; its drawback is difficult, careful storage.

Privacy · Terms · Refunds · Delivery