• Foundation
  • About 15 min
  • 5 practice questions

Fossil fuels: coal, petroleum and natural gas

Explain how coal and petroleum formed, order the types of coal, name the products of coal and the fractions of petroleum with their uses, and describe CNG and LPG.

If something looks wrong, please tell us.

Most of the fuel the world burns comes from the remains of living things that died millions of years ago. These fossil fuels are coal, petroleum and natural gas. They are rich in energy and convenient, but there is only so much of them. This lesson explains how they formed, how they are processed into the fuels we buy, and what each product is used for.

Exhaustible and inexhaustible resources

Some natural resources, such as sunlight and air, will not run out through human use; they are inexhaustible. Others, such as coal, petroleum, natural gas and minerals, exist in limited amounts and can be used up; they are exhaustible. Fossil fuels took millions of years to form, and we are using them far faster than they could ever be replaced.

Coal

Long ago, dense forests in low-lying wetlands were buried under soil when the land flooded or shifted. Pressed deeper over time, the dead plants faced high pressure and temperature with little air, and slowly turned into coal. This slow conversion of dead plant matter into coal is called carbonisation. Because coal formed from the remains of living things, it is a fossil fuel.

As carbonisation goes further, the carbon content rises. The types of coal in order of increasing carbon content (and generally increasing calorific value) are: peat (lowest), lignite, bituminous coal, and anthracite (highest).

When coal is heated strongly in the absence of air, it does not burn but breaks down into useful products. Coke is a tough, porous, black substance that is almost pure carbon; it is used in making steel and in extracting many metals. Coal tar is a thick black liquid with an unpleasant smell, a mixture of many substances used to make synthetic dyes, drugs, explosives, perfumes, paints and naphthalene balls. Coal gas is a fuel gas given off in the process.

Petroleum and natural gas

Petroleum formed from the remains of tiny organisms that lived in the sea. They settled on the sea bed, were covered by layers of sand and clay, and over millions of years, under heat and pressure without air, turned into petroleum and natural gas, which are often found together trapped under rock. Crude petroleum is a dark, oily mixture of many substances. It is separated in a refinery by fractional distillation: the oil is heated and its parts, or fractions, separate according to their boiling points. Fractions with lower boiling points rise higher in the column.

Petroleum fractions and their uses
FractionMain uses
Petroleum gas (LPG)Fuel for homes and industry
PetrolMotor fuel, aviation fuel, solvent for dry cleaning
KeroseneFuel for stoves, lamps and jet aircraft
DieselFuel for heavy vehicles and electric generators
Lubricating oilLubrication of machines
Paraffin waxOintments, candles, vaseline
BitumenPaints, road surfacing

Natural gas is mostly methane. Stored under high pressure it is compressed natural gas (CNG), used in vehicles and for power and is a cleaner fuel than petrol or diesel. LPG is mainly butane, with propane; it is stored as a liquid under pressure in cylinders. Because LPG has no smell of its own, a strong-smelling compound is added so that leaks can be noticed.

Worked example 1: ordering coal

Arrange anthracite, peat, bituminous coal and lignite in increasing order of carbon content. Recall the sequence of carbonisation: peat forms first, then lignite, then bituminous coal, then anthracite. So the order is peat < lignite < bituminous < anthracite. Anthracite therefore has the highest carbon content.

Worked example 2: CO₂ from coal

A sample of coal contains 90% carbon. How much CO₂ forms when 100 kg of it burns completely? Carbon = 90% of 100 kg = 90 kg. From C + O₂ → CO₂, 12 kg of carbon gives 44 kg of CO₂. So 90 kg gives 90 × 44 ÷ 12 = 330 kg of CO₂, more than three times the mass of the coal.

Worked example 3: matching fractions

Which petroleum fraction would a road builder use, and which a candle maker? Roads are surfaced with bitumen, the thick black residue; candles are made from paraffin wax. Matching uses this way, by thinking about what each fraction is like, is easier than memorising a bare list.

Coal: peat < lignite < bituminous < anthracite in carbon. Coal heated without air gives coke, coal tar and coal gas. Petroleum is separated by fractional distillation. CNG is mostly methane; LPG is mainly butane.

  • Fossil fuels are exhaustible: they formed over millions of years.
  • Carbonisation turned buried plants into coal.
  • Coke is used in steel making; coal tar gives dyes, drugs and naphthalene balls.
  • Petroleum fractions range from LPG to bitumen.

Check your understanding

  1. 1. Which type of coal has the highest carbon content?

    1. Peat
    2. Lignite
    3. Bituminous coal
    4. Anthracite
    Show answer

    Answer: D. Carbon content rises from peat to lignite to bituminous coal to anthracite.

  2. 2. Which product of coal is used in making steel?

    1. Coke
    2. Coal tar
    3. Coal gas
    4. Bitumen
    Show answer

    Answer: A. Coke, almost pure carbon, is used in steel making and metal extraction. Bitumen comes from petroleum.

  3. 3. Which petroleum fraction is used for surfacing roads?

    1. LPG
    2. Paraffin wax
    3. Bitumen
    4. Kerosene
    Show answer

    Answer: C. Bitumen is used in paints and road surfacing.

  4. 4. CNG consists mainly of

    1. butane
    2. methane
    3. propane
    4. hydrogen
    Show answer

    Answer: B. Natural gas, and therefore CNG, is mostly methane. LPG is mainly butane.

  5. 5. Crude petroleum is separated into its fractions by

    1. carbonisation
    2. fractional distillation
    3. fermentation
    4. sublimation
    Show answer

    Answer: B. Fractions separate by boiling point in fractional distillation. Carbonisation is how coal formed.

Privacy · Terms · Refunds · Delivery