• Foundation
  • About 15 min
  • 5 practice questions

Flames, and complete versus incomplete combustion

Describe the zones of a candle flame, write balanced equations for complete and incomplete combustion, and calculate the oxygen used and CO₂ formed.

If something looks wrong, please tell us.

A flame is not the same all the way through. If you look carefully at a candle you can see a dark centre, a bright yellow middle and a faint blue outer edge, and each part is doing something different. The colour of a flame also tells you whether a fuel is burning completely, which matters for how much heat you get and for safety. This lesson explains the flame and the chemistry of complete and incomplete burning.

Why some fuels give a flame

Only substances that turn into vapour while burning give a flame. Candle wax melts, rises up the wick and vaporises; kerosene does the same in a lamp. The flame is the burning vapour. Charcoal, which does not vaporise, simply glows red without a flame.

The zones of a candle flame

Candle flame zones
ZoneAppearanceWhat happensTemperature
Innermost zoneDark, around the wickUnburnt wax vapour; no burningLeast hot
Middle zoneBright yellow, luminousPartial (incomplete) combustion; glowing carbon particles give lightModerately hot
Outer zonePale blue, non-luminousComplete combustion with plenty of airHottest

Goldsmiths blow air through a metal tube onto the outermost zone of a flame to melt gold and silver, because it is the hottest part. If you hold a glass plate in the yellow zone, it collects a black ring of soot: unburnt carbon from incomplete combustion.

Complete combustion

When there is plenty of oxygen, a fuel made of carbon and hydrogen burns completely to carbon dioxide and water. For methane, the main gas in CNG: CH₄ + 2O₂ → CO₂ + 2H₂O. For propane, a gas found in LPG: C₃H₈ + 5O₂ → 3CO₂ + 4H₂O. Complete combustion gives the most heat from the fuel and usually a blue flame.

Incomplete combustion

When oxygen is short, carbon is only partly oxidised. It forms carbon monoxide, and some carbon is left as soot: 2CH₄ + 3O₂ → 2CO + 4H₂O. Incomplete combustion gives less heat, produces a yellow, sooty flame, blackens vessels, and releases carbon monoxide, a poisonous gas that is dangerous in closed rooms. A gas stove with a yellow flame usually needs its air supply adjusted or its burner cleaned.

Worked example 1: balancing propane

Balance C₃H₈ + O₂ → CO₂ + H₂O. Carbon: 3 on the left, so 3CO₂. Hydrogen: 8 on the left, so 4H₂O. Oxygen on the right: 3 × 2 + 4 × 1 = 10 atoms, which is 5 molecules of O₂. Balanced: C₃H₈ + 5O₂ → 3CO₂ + 4H₂O. Check: C 3 = 3, H 8 = 8, O 10 = 10.

Worked example 2: oxygen used and CO₂ formed

How much oxygen is needed to burn 16 g of methane completely, and how much CO₂ forms? Molar masses: CH₄ = 12 + 4 = 16 g/mol, O₂ = 32 g/mol, CO₂ = 44 g/mol. 16 g of methane is 1 mol. From CH₄ + 2O₂ → CO₂ + 2H₂O, 1 mol of methane needs 2 mol of O₂ = 64 g and forms 1 mol of CO₂ = 44 g. Check the masses: 16 + 64 = 80 g of reactants; 44 g CO₂ + 2 × 18 = 36 g water = 80 g of products.

Worked example 3: reading the flame

A cook notices that the pot bottoms are turning black and the flame is yellow. Reasoning: black deposits are soot, which is unburnt carbon; a yellow flame shows glowing carbon particles; both point to incomplete combustion from too little air. The fix is to clean the burner holes or open the air inlet so the flame turns blue.

Plenty of air: fuel → CO₂ + H₂O, blue flame, most heat. Too little air: CO and soot, yellow flame, less heat. The outer blue zone of a flame is the hottest.

  • Only fuels that vaporise give a flame.
  • Candle flame: dark inner (unburnt vapour), yellow middle (partial burning), blue outer (complete burning, hottest).
  • Balance carbon, then hydrogen, then oxygen.
  • Incomplete combustion wastes fuel and produces poisonous CO.

Check your understanding

  1. 1. Which is the hottest zone of a candle flame?

    1. Innermost dark zone
    2. Middle luminous zone
    3. Outer non-luminous zone
    4. The wick itself
    Show answer

    Answer: C. The outer zone has the most air, so combustion is complete and it is the hottest.

  2. 2. Which zone of a candle flame contains unburnt wax vapour?

    1. Innermost dark zone
    2. Middle luminous zone
    3. Outer non-luminous zone
    4. None of them
    Show answer

    Answer: A. Around the wick, the wax vapour has not yet met enough oxygen to burn.

  3. 3. In the balanced equation C₃H₈ + x O₂ → 3CO₂ + 4H₂O, what is x?

    1. 3
    2. 4
    3. 7
    4. 5
    Show answer

    Answer: D. Oxygen atoms on the right: 3 × 2 + 4 = 10, which is 5 O₂.

  4. 4. What mass of oxygen is needed to burn 32 g of methane completely?

    1. 64 g
    2. 128 g
    3. 32 g
    4. 96 g
    Show answer

    Answer: B. 32 g CH₄ = 2 mol; each needs 2 mol O₂, so 4 mol O₂ = 4 × 32 = 128 g.

  5. 5. Which is a sign of incomplete combustion on a gas stove?

    1. A blue flame
    2. A yellow, sooty flame and black deposits on vessels
    3. More heat than usual
    4. Only carbon dioxide and water being formed
    Show answer

    Answer: B. Soot and a yellow flame mean carbon is not fully burnt because oxygen is short.

Privacy · Terms · Refunds · Delivery