- Foundation
- About 15 min
- 5 practice questions
Refining petroleum: fractions, boiling points and cracking
Explain how fractional distillation separates crude oil, order the fractions by boiling point and molecule size, and write balanced equations for cracking.
If something looks wrong, please tell us.
Crude petroleum straight from the ground is a thick, dark mixture of hundreds of hydrocarbons and is of little use in that form. It is refined to give the fuels that run our vehicles and kitchens and the starting materials for plastics. The refinery works by two ideas: separating the mixture by boiling point, and then breaking big molecules into more useful small ones. Both are easy to follow.
Fractional distillation
Crude oil is heated until most of it is vapour and fed into the bottom of a tall tower, called a fractionating column. The tower is hottest at the bottom and coolest at the top. As the vapours rise they cool, and each hydrocarbon condenses at the level where the temperature falls below its boiling point. Trays collect the liquids at different heights. A group of hydrocarbons with similar boiling points that is drawn off together is called a fraction.
Small molecules have low boiling points, because only weak forces between molecules have to be overcome, and they are collected at the top. Large molecules have high boiling points and condense near the bottom.
| Fraction | Carbon atoms per molecule | Where collected | Typical use |
|---|---|---|---|
| Petroleum gas | 1 to 4 | Top | Domestic fuel (LPG) |
| Petrol | 5 to 10 | Near the top | Motor fuel |
| Kerosene | 10 to 16 | Upper middle | Stove, lamps, jet fuel |
| Diesel | 14 to 20 | Middle | Fuel for buses, trucks, trains |
| Lubricating oil, wax | 20 to 40 (roughly) | Lower | Lubricants, candles, polish |
| Bitumen | Very many | Bottom residue | Road surfacing |
Down the tower, from top to bottom: the molecules get larger, the boiling points rise, the liquids become thicker (more viscous) and darker, they become harder to ignite, and they burn with a smokier flame.
Cracking
The tower does not make the fractions in the amounts people want. There is more demand for petrol than the crude oil yields, and too much of the heavy fractions. Cracking breaks large hydrocarbon molecules into smaller ones using heat and a catalyst. The products are a smaller alkane, which is useful as fuel, and an alkene, which is used to make plastics such as polythene.
Cracking: one large alkane → a smaller alkane + an alkene. Atoms are conserved, so the carbon and hydrogen on the two sides must be equal.
Worked example 1: balancing. C₁₂H₂₆ → C₁₀H₂₂ + ? The carbon left over is 12 - 10 = 2 and the hydrogen 26 - 22 = 4, so the other product is C₂H₄, which is ethene. The equation is C₁₂H₂₆ → C₁₀H₂₂ + C₂H₄. The molar masses are 170 → 142 + 28, and 142 + 28 = 170, so mass is conserved.
Worked example 2: an unsaturation test. A student collects the gaseous product of the cracking of paraffin oil and shakes it with bromine water. The brown colour disappears. The product contains an alkene, because alkenes have a double bond, which adds bromine, whereas the alkanes in the starting material do not decolourise bromine water in the dark.
Worked example 3: another cracking equation. C₁₄H₃₀ → C₈H₁₈ + 2C₂H₄ + ? Carbon: 14 - 8 - 4 = 2; hydrogen: 30 - 18 - 8 = 4. The missing product is one more C₂H₄. The balanced equation is C₁₄H₃₀ → C₈H₁₈ + 3C₂H₄. Check: 14 carbon atoms (8 + 6) and 30 hydrogen atoms (18 + 12).
Worked example 4: put the fractions in order. Arrange petrol, diesel, bitumen and petroleum gas in increasing order of boiling point. The smaller the molecule, the lower the boiling point, so the order is petroleum gas < petrol < diesel < bitumen.
Key takeaways
- Fractional distillation separates by boiling point; small molecules rise to the top.
- Cracking turns large molecules into smaller alkanes and alkenes with heat and a catalyst.
- Alkenes decolourise bromine water; alkanes do not.
Check your understanding
-
1. In a fractionating column, the fraction with the lowest boiling range is collected
- at the bottom
- in the middle
- at the top
- as a solid residue
Show answer
Answer: C. Small molecules have the lowest boiling points and stay as vapour longest, so they leave at the top.
-
2. Which fraction is used for surfacing roads?
- Bitumen
- Kerosene
- Petrol
- Diesel
Show answer
Answer: A. Bitumen, the residue at the bottom of the tower, is used for roads and roofing.
-
3. In C₁₆H₃₄ → C₈H₁₈ + 2X, the formula of X is
- C₂H₄
- C₃H₆
- C₄H₈
- C₈H₁₆
Show answer
Answer: C. Left over: C₈H₁₆ for two molecules of X, so each X is C₄H₈.
-
4. Why is cracking carried out?
- To make kerosene from petrol molecules
- To turn large molecules into small useful ones
- To remove sulphur from the crude oil
- To make bitumen from diesel molecules
Show answer
Answer: B. The tower gives too much of the heavy fractions, so large molecules are broken into petrol-sized molecules and alkenes.
-
5. Which test shows that a cracking product contains an alkene?
- It turns lime water milky white
- It turns red litmus paper blue
- It burns with a pale blue flame
- It decolourises bromine water
Show answer
Answer: D. Alkenes add bromine, so the brown colour of bromine water disappears.
Sign in to keep track of the lessons you finish.