Revision notes

Metals and Non-metals: Practice

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Properties of metals and non-metals with exceptions

Metals and non-metals compared
PropertyMetalsNon-metals
AppearanceLustrous (shiny)Dull
HardnessUsually hardUsually soft (brittle if solid)
Malleable and ductileYesNo, brittle
ConductivityGood conductors of heat and electricityPoor conductors
Melting and boiling pointsUsually highUsually low
SoundSonorousNot sonorous
OxidesBasic or amphotericAcidic or neutral
Ions formedPositive (lose electrons)Negative (gain electrons)

Remember the exceptions: mercury liquid metal, bromine liquid non-metal, graphite conducts, diamond hardest, alkali metals soft.

Key takeaways: Learn the general table, then memorise the exceptions, as they are the most commonly asked.

Read the full lesson

Lesson 2

Reactivity series and displacement reactions

Behaviour of metals
MetalsWith cold waterWith dilute acid
K, Na, CaReact vigorously (Na and K can catch fire)React violently
MgReacts only with hot water or steam slowlyReacts readily
Al, Zn, FeDo not react with cold or hot water; react with steamReact, releasing hydrogen
PbNo reactionReacts slowly or hardly
Cu, Hg, Ag, AuNo reactionNo reaction with dilute acid (below hydrogen)

A metal higher in the reactivity series displaces any metal below it from its salt solution, and only metals above hydrogen release hydrogen from dilute acids.

Key takeaways: The series predicts water, acid and displacement reactions; hydrogen's position decides which metals react with dilute acids.

Read the full lesson

Lesson 3

Extraction of metals: ores, roasting and reduction

Extraction by reactivity
ReactivityMetalsMethod
High (K to Al)K, Na, Ca, Mg, AlElectrolysis of the molten chloride or oxide
Medium (Zn to Pb)Zn, Fe, PbConvert to oxide, then reduce with carbon or carbon monoxide
LowCu, Hg, AgHeating alone, or simple roasting, can be enough
Very lowAu, PtFound as the free element (native)

Highly reactive metals: electrolysis. Middle: carbon reduction of the oxide. Least reactive: heating or found native.

Key takeaways: Pick the method by reactivity, convert sulfides and carbonates to oxides, and use mole ratios for yield.

Read the full lesson

Lesson 4

Corrosion, alloys and metal compounds

Alloys
AlloyMain componentsNotable use
BrassCopper and zincUtensils, musical instruments
BronzeCopper and tinStatues, medals, bells
SolderLead and tinJoining wires; low melting point
Stainless steelIron with chromium and nickelCutlery, surgical instruments; does not rust
AmalgamMercury with another metalDental fillings

Rusting needs both air (oxygen) and water. Galvanising protects by sacrificial action of zinc.

Key takeaways: Rust needs air and water; keep both away or use a more reactive metal as a sacrificial coating; alloys improve strength and resistance.

Read the full lesson

Lesson 5

Non-metals and mixed metal-non-metal problems

Metal oxides are basic (litmus turns blue), non-metal oxides acidic (litmus turns red), and amphoteric oxides react with both acids and bases.

Key takeaways: Know the carbon allotropes, the acidic and basic oxide rule, and use mole ratios for any mass or volume question.

Read the full lesson

Lesson 6

Reactivity series: deducing the order from experiments and container questions

Rules for chaining results
ObservationConclusion
A displaces B from a solution of its saltA is more reactive than B
A gives no reaction with a solution of B's saltA is less reactive than B
A releases hydrogen from dilute acidA is above hydrogen
A does not release hydrogen from dilute acidA is below hydrogen

Chain the results: displaces means more reactive. Moles of metal dissolved and deposited decide the mass change of a plate. Sodium reacts with water first.

— Rule to remember
  • Build the order from displacement results and check it against the no-reaction results.
  • A vessel must be less reactive than the metal in the stored salt.
  • Mass change = mass deposited − mass dissolved.
Read the full lesson

Lesson 7

Oxides and carbonates: heating, acids and amphoteric behaviour

Four kinds of oxide
TypeBehaviourExamples
BasicReacts with acids to give salt and waterNa₂O, MgO, CuO
AcidicReacts with alkalis to give salt and waterCO₂, SO₂
AmphotericReacts with both acids and alkalisAl₂O₃, ZnO
NeutralReacts with neitherCO, NO, N₂O

Carbonate → oxide + CO₂ on heating; carbonate + acid → salt + water + CO₂. Al₂O₃ and ZnO are amphoteric, so they dissolve in both acids and alkalis.

— Rule to remember
  • Limewater turning milky is the test for carbon dioxide.
  • Zinc oxide is yellow when hot and white when cold.
  • Al₂O₃ and ZnO are the standard examples of oxides that dissolve in both HCl and NaOH.
Read the full lesson

Lesson 8

Extraction calculations: percentage of metal, ore purity and yield

Pure mass = purity × ore mass. Then mole ratio. Percentage yield = actual ÷ theoretical × 100.

— Rule to remember
Read the full lesson

Lesson 9

Reasoning questions: oxide layers, sacrificial protection, carats and conduction

Who carries the current?
SubstanceCarriersConducts when
A metalFree (delocalised) electronsSolid or molten
An ionic compoundMobile ionsMolten or dissolved, not solid
GraphiteFree electrons between layersSolid
DiamondNoneNever

Aluminium resists corrosion because of its own oxide layer. Zinc and magnesium protect iron by sacrificing themselves. Carat ÷ 24 gives the fraction of gold.

— Rule to remember
  • Name the fact, then the reason, in every why-answer.
  • Tin protects iron only while undamaged; zinc protects even when scratched.
  • Metals conduct by electrons; molten or dissolved ionic compounds conduct by ions.
Read the full lesson

Privacy · Terms · Refunds · Delivery