• Practice
  • About 14 min
  • 5 practice questions

Reasoning questions: oxide layers, sacrificial protection, carats and conduction

Give short, correct explanations for the standard why-questions on metals: aluminium's oxide layer, sacrificial anodes, carats of gold and why metals and ionic compounds conduct differently.

If something looks wrong, please tell us.

Many questions on metals begin with the word why. A good answer is two sentences: the fact, then the reason. This lesson collects the reasoning that appears most often, with a short model answer for each.

Aluminium: reactive but rust-free

Aluminium is high in the reactivity series, yet utensils and window frames made of it last for years. In air it quickly forms a thin, tough, transparent layer of aluminium oxide that sticks to the surface and keeps oxygen and water away from the metal below. The process of making this layer thicker by passing current through the metal in an acid bath is called anodising. By contrast, the rust of iron flakes off and exposes fresh metal.

Sacrificial protection

A more reactive metal in electrical contact with iron corrodes in its place. Zinc coating (galvanising) works this way even when scratched. Blocks of magnesium or zinc are fixed to ship hulls and joined to buried iron pipes for the same reason: the block dissolves slowly and is replaced, while the iron stays intact. Tin plating is different. Tin is less reactive than iron, so it protects only while the layer is unbroken, and once scratched it speeds up the rusting of the iron.

Carat and the purity of gold

Pure gold is 24 carat. Carat is the number of parts of gold in 24 parts of the alloy, so percentage of gold = carat ÷ 24 × 100. Pure gold is too soft for jewellery, so it is alloyed with copper or silver to make it hard.

Conduction compared

Who carries the current?
SubstanceCarriersConducts when
A metalFree (delocalised) electronsSolid or molten
An ionic compoundMobile ionsMolten or dissolved, not solid
GraphiteFree electrons between layersSolid
DiamondNoneNever

Worked examples

Example 1. What percentage of gold is in 22 carat jewellery? 22 ÷ 24 × 100 = 91.7%. The rest, 8.3%, is another metal such as copper.

Example 2. How much pure gold is there in a 12 g ring made of 18 carat gold? 18 carat is 18 ÷ 24 = 0.75, so the ring holds 0.75 × 12 = 9 g of gold.

Example 3. Why is magnesium attached to the hull of a steel ship? Magnesium is more reactive than iron, so it loses electrons and dissolves in preference to the iron. The hull is protected as long as magnesium remains; the block is replaced when used up.

Example 4. Why can copper wire conduct in the solid state, while solid sodium chloride cannot? Copper has free electrons that move through the solid. Solid sodium chloride has no free electrons, and its ions are fixed in place.

Aluminium resists corrosion because of its own oxide layer. Zinc and magnesium protect iron by sacrificing themselves. Carat ÷ 24 gives the fraction of gold.

— Rule to remember

Key takeaways

  • Name the fact, then the reason, in every why-answer.
  • Tin protects iron only while undamaged; zinc protects even when scratched.
  • Metals conduct by electrons; molten or dissolved ionic compounds conduct by ions.

Check your understanding

  1. 1. Aluminium does not corrode quickly in air mainly because

    1. it is below hydrogen in the series
    2. it forms a thin protective oxide layer
    3. it has no reaction with oxygen
    4. it is covered with a layer of rust
    Show answer

    Answer: B. Aluminium reacts with oxygen to form a thin, tight oxide film that stops further attack.

  2. 2. What percentage of gold is present in 18 carat gold?

    1. 18%
    2. 60%
    3. 90%
    4. 75%
    Show answer

    Answer: D. 18 ÷ 24 × 100 = 75%.

  3. 3. Why does a zinc coating protect iron even after the coating is scratched?

    1. Zinc is more reactive and corrodes first
    2. Zinc is less reactive and stays bright
    3. Zinc conducts heat better than iron
    4. Zinc melts and refills the scratch
    Show answer

    Answer: A. Zinc is higher in the reactivity series, so it corrodes in preference to iron and protects it.

  4. 4. How much pure gold is there in a 24 g object made of 22 carat gold?

    1. 20 g
    2. 18 g
    3. 22 g
    4. 24 g
    Show answer

    Answer: C. 22 ÷ 24 × 24 = 22 g.

  5. 5. Which of these conducts electricity in the solid state?

    1. Solid sodium chloride
    2. Diamond
    3. Solid sugar
    4. Graphite
    Show answer

    Answer: D. Graphite has free electrons between its layers. NaCl has fixed ions, and diamond and sugar have no mobile charge carriers.

Privacy · Terms · Refunds · Delivery