- Practice
- About 14 min
- 5 practice questions
Reactivity series: deducing the order from experiments and container questions
Work out the order of unknown metals from displacement results, predict what happens in a mixed experiment, and calculate the mass change of a plate.
If something looks wrong, please tell us.
Exams rarely ask you to recite the series. They give results of experiments and ask you to deduce an order, or they set a trap such as sodium in a salt solution. This lesson trains you to read such data and to handle the mass changes that follow a displacement reaction.
Reading experimental results
Each displacement result is one inequality: if metal A displaces metal B from its salt solution, then A is more reactive than B. Collect all the inequalities and chain them. A no reaction result gives the opposite inequality and is useful as a check.
| Observation | Conclusion |
|---|---|
| A displaces B from a solution of its salt | A is more reactive than B |
| A gives no reaction with a solution of B's salt | A is less reactive than B |
| A releases hydrogen from dilute acid | A is above hydrogen |
| A does not release hydrogen from dilute acid | A is below hydrogen |
Container and storage questions
A solution of a metal salt can be stored in a vessel only if the vessel metal is less reactive than the metal in the salt. Copper sulphate attacks iron and zinc vessels, because both are more reactive than copper, but it is safe in silver. Dilute sulphuric acid attacks zinc but not copper.
The sodium trap
Very reactive metals such as sodium, potassium and calcium react with the water of the solution before they can displace anything. Sodium added to copper sulphate solution gives hydrogen and then a blue precipitate: 2Na + 2H₂O → 2NaOH + H₂, followed by 2NaOH + CuSO₄ → Cu(OH)₂ + Na₂SO₄. No copper metal forms.
Worked examples
Example 1. P displaces Q from its salt, Q displaces R, R does not displace P, and S displaces P. Give the order. S > P, P > Q and Q > R, so the order is S > P > Q > R. The result that R does not displace P agrees.
Example 2. A zinc plate is dipped in copper sulphate solution until 0.1 mol of zinc has dissolved (Zn = 65, Cu = 63.5). By how much does the plate's mass change? Zn + CuSO₄ → ZnSO₄ + Cu. Zinc lost = 0.1 × 65 = 6.5 g. Copper gained = 0.1 × 63.5 = 6.35 g. Net change = 6.35 − 6.5 = −0.15 g, so the plate loses 0.15 g.
Example 3. An iron plate is treated the same way until 0.1 mol of iron has dissolved (Fe = 56). Iron lost = 5.6 g, copper gained = 6.35 g, so the plate gains 6.35 − 5.6 = 0.75 g.
Example 4. What mass of silver is deposited when 0.1 mol of copper reacts with excess silver nitrate (Ag = 108)? Cu + 2AgNO₃ → Cu(NO₃)₂ + 2Ag. 0.1 mol of copper gives 0.2 mol of silver, which is 0.2 × 108 = 21.6 g.
Chain the results: displaces means more reactive. Moles of metal dissolved and deposited decide the mass change of a plate. Sodium reacts with water first.
Key takeaways
- Build the order from displacement results and check it against the no-reaction results.
- A vessel must be less reactive than the metal in the stored salt.
- Mass change = mass deposited − mass dissolved.
Check your understanding
-
1. A zinc plate is placed in copper sulphate solution until 0.1 mol of zinc has dissolved (Zn = 65, Cu = 63.5). The mass of the plate
- decreases by 0.15 g
- increases by 0.15 g
- increases by 6.35 g
- stays exactly the same
Show answer
Answer: A. Zinc lost = 6.5 g and copper deposited = 6.35 g, so the plate loses 6.5 − 6.35 = 0.15 g.
-
2. Sodium is added to copper sulphate solution. What is observed?
- Reddish-brown copper metal is deposited
- Hydrogen gas and a blue precipitate form
- Only a clear colourless solution forms
- Copper and hydrogen are both released
Show answer
Answer: B. Sodium reacts with water first to give NaOH and hydrogen. NaOH then precipitates blue copper hydroxide.
-
3. P displaces Q, Q displaces R and S displaces P. What is the order of decreasing reactivity?
- P > Q > R > S
- R > Q > P > S
- S > R > Q > P
- S > P > Q > R
Show answer
Answer: D. S > P, P > Q and Q > R chain into S > P > Q > R.
-
4. In which vessel can copper sulphate solution be stored safely?
- Zinc
- Iron
- Silver
- Aluminium
Show answer
Answer: C. Silver is less reactive than copper, so it cannot displace it. Zinc, iron and aluminium are more reactive and would be attacked.
-
5. What mass of silver forms when 0.1 mol of copper reacts with excess AgNO₃ solution (Ag = 108)?
- 10.8 g
- 6.35 g
- 43.2 g
- 21.6 g
Show answer
Answer: D. Cu + 2AgNO₃ → Cu(NO₃)₂ + 2Ag. 0.1 mol of Cu gives 0.2 mol of Ag = 0.2 × 108 = 21.6 g.
Sign in to keep track of the lessons you finish.