- Practice
- About 13 min
- 5 practice questions
Extraction of metals: ores, roasting and reduction
Choose the right extraction method for a metal from its position in the reactivity series and write the main equations.
If something looks wrong, please tell us.
A mineral from which a metal can be extracted profitably is called an ore. The method of extraction depends on the metal's position in the reactivity series: the more reactive the metal, the harder it is to extract.
Method chosen by reactivity
| Reactivity | Metals | Method |
|---|---|---|
| High (K to Al) | K, Na, Ca, Mg, Al | Electrolysis of the molten chloride or oxide |
| Medium (Zn to Pb) | Zn, Fe, Pb | Convert to oxide, then reduce with carbon or carbon monoxide |
| Low | Cu, Hg, Ag | Heating alone, or simple roasting, can be enough |
| Very low | Au, Pt | Found as the free element (native) |
Terms and equations
- Roasting: heating a sulfide ore strongly in excess air: 2 ZnS + 3 O2 gives 2 ZnO + 2 SO2.
- Calcination: heating a carbonate ore in limited or no air: ZnCO3 gives ZnO + CO2.
- Reduction: ZnO + C gives Zn + CO.
- Iron from haematite: Fe2O3 + 3 CO gives 2 Fe + 3 CO2 (in the blast furnace).
- Aluminium: electrolysis of molten alumina (Al2O3) dissolved in cryolite; aluminium forms at the cathode, oxygen at the anode.
- Thermit reaction: Fe2O3 + 2 Al gives Al2O3 + 2 Fe, strongly exothermic and used to weld railway tracks.
Worked examples
Example 1. Why is sodium obtained by electrolysis and not by carbon reduction? Working: sodium is very reactive, so carbon is too weak a reducing agent to take oxygen from its oxide. Electrolysis supplies enough energy.
Example 2. Why is a sulfide ore first converted into an oxide? Working: oxides are more easily reduced by carbon than sulfides, so roasting converts a sulfide to oxide.
Example 3. Calculate the mass of iron obtainable from 160 g of Fe2O3 (Fe = 56, O = 16). Working: molar mass of Fe2O3 = 2 x 56 + 3 x 16 = 160 g per mol. One mole gives 2 mol Fe = 112 g. So 160 g of Fe2O3 gives 112 g of iron.
Example 4. How is mercury extracted from cinnabar (HgS)? Working: by roasting: HgS + O2 gives Hg + SO2, as mercury oxide decomposes on heating.
Highly reactive metals: electrolysis. Middle: carbon reduction of the oxide. Least reactive: heating or found native.
Key takeaways: Pick the method by reactivity, convert sulfides and carbonates to oxides, and use mole ratios for yield.
Check your understanding
-
1. What mass of iron can be obtained from 320 g of Fe₂O₃? (Fe = 56, O = 16)
- 112 g
- 224 g
- 160 g
- 448 g
Show answer
Answer: B. Fe₂O₃ = 2 × 56 + 3 × 16 = 160 g/mol, so 320 g is 2 mol. Each mole gives 2 mol Fe, so 4 mol Fe = 4 × 56 = 224 g.
-
2. In the electrolysis of molten alumina dissolved in cryolite, where is aluminium formed?
- At the anode
- In the cryolite as a gas
- It is not formed; only oxygen is
- At the cathode
Show answer
Answer: D. Aluminium ions are positive and gain electrons at the cathode, forming aluminium metal; oxygen forms at the anode.
-
3. In Fe₂O₃ + 3CO → 2Fe + 3CO₂, which substance is the reducing agent?
- Fe₂O₃
- CO
- Fe
- CO₂
Show answer
Answer: B. Carbon monoxide takes oxygen from iron(III) oxide and becomes CO₂, so CO is the reducing agent and Fe₂O₃ is reduced.
-
4. Why is a sulphide ore roasted before the metal is extracted?
- Roasting turns the sulphide straight into pure metal for all ores
- Sulphides cannot be heated
- Roasting removes all oxygen from the ore
- Oxides are more easily reduced by carbon than sulphides
Show answer
Answer: D. Roasting converts the sulphide into an oxide (2ZnS + 3O₂ → 2ZnO + 2SO₂), which carbon can then reduce.
-
5. Which gas is released when zinc carbonate is calcined?
- Carbon dioxide
- Sulphur dioxide
- Oxygen
- Hydrogen
Show answer
Answer: A. Calcination: ZnCO₃ → ZnO + CO₂. The carbonate loses carbon dioxide.
Sign in to keep track of the lessons you finish.