- Practice
- About 12 min
- 5 practice questions
Corrosion, alloys and metal compounds
Explain rusting and its prevention, and recall common alloys, their components and uses.
If something looks wrong, please tell us.
Metals are used everywhere, but they corrode, and pure metals often lack the right properties. This lesson covers how corrosion occurs, how to prevent it and what alloys are.
Corrosion and rusting
Rusting of iron requires both oxygen (air) and water. The rust is hydrated iron(III) oxide, Fe2O3.xH2O, a flaky reddish-brown solid. Iron in dry air or in boiled water without air does not rust. Salty water speeds up rusting. Silver tarnishes (black silver sulfide) and copper turns green (basic copper carbonate) in moist air.
Prevention of rusting
- Painting, oiling and greasing keep air and water away.
- Galvanising: coating iron with zinc. Zinc is more reactive and protects the iron even if the coating is scratched (sacrificial protection).
- Tin plating protects iron only while the coating stays intact.
- Making alloys, such as stainless steel, which contains chromium and nickel.
Common alloys
| Alloy | Main components | Notable use |
|---|---|---|
| Brass | Copper and zinc | Utensils, musical instruments |
| Bronze | Copper and tin | Statues, medals, bells |
| Solder | Lead and tin | Joining wires; low melting point |
| Stainless steel | Iron with chromium and nickel | Cutlery, surgical instruments; does not rust |
| Amalgam | Mercury with another metal | Dental fillings |
An alloy is a homogeneous mixture of a metal with other elements. Alloys are usually harder and more resistant to corrosion than pure metals, but they conduct electricity less well. Pure gold (24 carat) is too soft for jewellery, so it is alloyed with copper or silver.
Worked examples
Example 1. Why does a galvanised iron sheet not rust even when scratched? Working: zinc is more reactive than iron, so it corrodes in preference and protects the iron.
Example 2. Three test tubes hold iron nails: (a) in water with air, (b) in boiled water covered with oil, (c) in dry air with anhydrous calcium chloride. In which does it rust? Working: only in (a), which has both air and water. In (b) air is excluded and in (c) water is absent.
Example 3. Why is solder used to join wires? Working: its alloy of lead and tin has a lower melting point than either metal alone.
Rusting needs both air (oxygen) and water. Galvanising protects by sacrificial action of zinc.
Key takeaways: Rust needs air and water; keep both away or use a more reactive metal as a sacrificial coating; alloys improve strength and resistance.
Check your understanding
-
1. In which set-up will an iron nail rust?
- In dry air with anhydrous calcium chloride
- In boiled water covered with a layer of oil
- In tap water open to the air
- Fully coated with grease
Show answer
Answer: C. Rusting needs both air and water. Only the nail in tap water open to air has both; the others lack water or air.
-
2. Why does a scratched tin-plated sheet rust, while a scratched galvanised sheet does not?
- Tin is more reactive than zinc
- Zinc does not react with air
- Zinc is more reactive than iron and corrodes first, but tin protects only while its coating is unbroken
- Tin coatings are thicker than zinc coatings
Show answer
Answer: C. Galvanising gives sacrificial protection: the more reactive zinc corrodes in place of iron. Tin only blocks air and water, so once scratched the iron rusts.
-
3. What is an amalgam?
- An alloy of mercury with another metal
- An alloy of copper and zinc
- An alloy of lead and tin
- An oxide of mercury
Show answer
Answer: A. Any alloy in which one metal is mercury is called an amalgam; one use is in dental fillings.
-
4. Why is solder used to join electric wires?
- It is a very good insulator
- It has a higher melting point than iron
- It is pure tin and does not conduct
- Its alloy of lead and tin has a low melting point
Show answer
Answer: D. Solder, an alloy of lead and tin, melts at a low temperature, so it can join wires without damaging them.
-
5. Why is 24-carat gold usually alloyed with copper or silver for jewellery?
- Pure gold rusts quickly
- Pure gold is too soft
- Pure gold is brittle like sulphur
- Pure gold does not shine
Show answer
Answer: B. Pure (24-carat) gold is very soft; alloying it with copper or silver makes it harder.
Sign in to keep track of the lessons you finish.