- Foundation
- About 13 min
- 5 practice questions
Changes of state and latent heat
Understand melting, boiling, freezing, condensation and sublimation, and why temperature stays constant while a substance changes state.
If something looks wrong, please tell us.
When you heat ice it becomes water and then steam. These are changes of state: the same substance, with the same particles, in a different arrangement. Knowing the names of the changes and the idea of latent heat is essential for exam questions on this chapter.
Names of the changes
| Change | Name | Heat |
|---|---|---|
| Solid to liquid | Melting (fusion) | Absorbed |
| Liquid to solid | Freezing (solidification) | Released |
| Liquid to gas | Boiling / vaporisation | Absorbed |
| Gas to liquid | Condensation | Released |
| Solid to gas directly | Sublimation | Absorbed |
| Gas to solid directly | Deposition | Released |
At normal atmospheric pressure, pure ice melts at 0 °C (273 K) and pure water boils at 100 °C (373 K). To convert Celsius to kelvin, add 273: K = °C + 273.
Latent heat: the hidden heat
If you heat melting ice with a thermometer in it, the temperature stays at 0 °C until all the ice has melted, even though you keep supplying heat. This heat is used to overcome the forces holding particles in the solid, not to raise the temperature. It is called latent heat (latent means hidden).
- Latent heat of fusion: heat needed to change 1 kg of a solid into liquid at its melting point, without any rise in temperature. For ice it is about 3.34 × 10⁵ J/kg.
- Latent heat of vaporisation: heat needed to change 1 kg of a liquid into gas at its boiling point. For water it is about 22.6 × 10⁵ J/kg.
This is why steam at 100 °C causes a worse burn than boiling water at 100 °C: steam carries the extra latent heat, which it releases when it condenses on the skin.
Sublimation
Some solids change directly to gas on heating. Camphor, naphthalene and ammonium chloride sublimate. Solid carbon dioxide (dry ice) also turns directly into gas at ordinary pressure, which is why it leaves no liquid behind.
Worked examples
Example 1. Convert 27 °C to kelvin. K = 27 + 273 = 300 K.
Example 2. How much heat is needed to melt 2 kg of ice at 0 °C? Q = m × L = 2 × 3.34 × 10⁵ = 6.68 × 10⁵ J.
Example 3. Convert 373 K to °C. °C = 373 − 273 = 100 °C, the boiling point of water.
During a change of state the temperature stays constant; the heat supplied goes into latent heat. Q = m × L.
Key takeaways
- Melting, boiling and sublimation absorb heat; freezing, condensation and deposition release it.
- K = °C + 273.
- Latent heat changes state without changing temperature.
- Steam burns more than boiling water because of latent heat.
Check your understanding
-
1. What is the direct change of a gas into a solid called?
- Sublimation
- Deposition
- Condensation
- Freezing
Show answer
Answer: B. Gas to solid directly is deposition. Sublimation is the reverse (solid to gas); condensation is gas to liquid.
-
2. What is 50 °C on the kelvin scale?
- 223 K
- 273 K
- 323 K
- 373 K
Show answer
Answer: C. K = °C + 273 = 50 + 273 = 323 K.
-
3. How much heat is needed to melt 5 kg of ice at 0 °C? (Latent heat of fusion = 3.34 × 10⁵ J/kg)
- 3.34 × 10⁵ J
- 6.68 × 10⁵ J
- 1.13 × 10⁷ J
- 1.67 × 10⁶ J
Show answer
Answer: D. Q = m × L = 5 × 3.34 × 10⁵ = 16.7 × 10⁵ J = 1.67 × 10⁶ J. The temperature does not change while it melts.
-
4. Why does steam at 100 °C cause a more severe burn than boiling water at 100 °C?
- Steam gives out extra latent heat when it condenses on the skin
- Steam is at a higher temperature
- Water does not carry any heat
- Steam particles are heavier
Show answer
Answer: A. Both are at 100 °C, but steam also releases its latent heat of vaporisation when it condenses on the skin.
-
5. Which of these does NOT sublime on heating?
- Camphor
- Common salt
- Naphthalene
- Ammonium chloride
Show answer
Answer: B. Camphor, naphthalene and ammonium chloride sublime. Common salt melts at a very high temperature instead.
Sign in to keep track of the lessons you finish.