• Foundation
  • About 12 min
  • 5 practice questions

Density of solids, liquids and gases: mass, volume and floating

Calculate density from mass and volume, use it to find mass or volume, compare the three states, and predict whether an object floats or sinks.

If something looks wrong, please tell us.

Why does a stone sink while a piece of wood floats, and why does a balloon filled with a light gas rise? The answer is density, a measure of how much matter is packed into a given space. It links the particle picture of solids, liquids and gases to simple calculations, and it is a standard topic in competitive exams. This lesson starts from the definition and builds up to floating and sinking.

What density is

Density is mass divided by volume: density = mass ÷ volume. If mass is in grams and volume in cubic centimetres (cm³), density is in g/cm³. In SI units mass is in kilograms and volume in cubic metres, so density is in kg/m³. A cubic centimetre is the same as a millilitre, so 1 mL = 1 cm³. To change units, remember that 1 g/cm³ = 1000 kg/m³. Water has a density of about 1 g/cm³, which is 1000 kg/m³.

Why the three states differ

In a solid the particles are packed tightly, so a given volume holds a lot of mass and the density is usually high. In a liquid the particles are slightly further apart, so the density is usually a little lower. In a gas the particles are very far apart, so a given volume holds very little mass and the density is very low. This is why a litre of air is far lighter than a litre of water. A well-known exception is water itself: ice has a lower density than liquid water, because its particles are held in an open pattern, and therefore ice floats.

Density in the three states
StateParticle spacingTypical density
SolidVery smallHigh (for example, metals)
LiquidSmallModerate
GasVery largeVery low

Floating and sinking

An object floats in a liquid if its density is less than the density of the liquid, and sinks if its density is greater. An object with the same density as the liquid stays at any depth. In water, anything with a density below 1 g/cm³ floats. A hot-air balloon rises because the hot air inside is less dense than the cooler air around it.

Worked example 1: finding density

A metal block has a mass of 54 g and a volume of 20 cm³. Step 1: write the formula, density = mass ÷ volume. Step 2: substitute, 54 ÷ 20. Step 3: the density is 2.7 g/cm³. In SI units that is 2.7 × 1000 = 2700 kg/m³.

Worked example 2: finding mass from density

A liquid has a density of 0.8 g/cm³. What is the mass of 250 mL of it? Step 1: rearrange, mass = density × volume. Step 2: substitute, 0.8 × 250 = 200. Step 3: the mass is 200 g, which is 0.2 kg.

Worked example 3: float or sink?

A wooden block of mass 120 g has a volume of 200 cm³. Does it float in water? Step 1: density = 120 ÷ 200 = 0.6 g/cm³. Step 2: compare with water, 1 g/cm³. Step 3: 0.6 is less than 1, so the block floats. A second block of mass 300 g and volume 100 cm³ has density 3 g/cm³, which is greater than 1, so it sinks.

Worked example 4: density of a gas

A gas of mass 2 g fills a 4 L container. Step 1: density = 2 ÷ 4 = 0.5 g/L. Step 2: in g/cm³ this is 0.5 ÷ 1000 = 0.0005 g/cm³ because 1 L = 1000 cm³. Compare this with water at 1 g/cm³: the gas is 2000 times less dense, which shows how far apart gas particles are.

Density = mass ÷ volume. Float if the object's density is less than the liquid's; sink if it is greater. 1 g/cm³ = 1000 kg/m³.

Key takeaways

  • Density measures how much mass is packed into a given volume.
  • Solids are usually densest, then liquids, then gases, which are far less dense.
  • Ice is less dense than liquid water and floats.
  • Compare densities to decide floating and sinking; keep units consistent.

Check your understanding

  1. 1. A block has mass 54 g and volume 20 cm³. Its density is:

    1. 0.37 g/cm³
    2. 74 g/cm³
    3. 1080 g/cm³
    4. 2.7 g/cm³
    Show answer

    Answer: D. Density = 54 ÷ 20 = 2.7 g/cm³.

  2. 2. A liquid has a density of 0.8 g/cm³. The mass of 250 cm³ of it is:

    1. 200 g
    2. 312.5 g
    3. 0.2 g
    4. 20 g
    Show answer

    Answer: A. Mass = density × volume = 0.8 × 250 = 200 g.

  3. 3. An object of mass 120 g and volume 200 cm³ is placed in water. It will:

    1. Sink, because it is heavy
    2. Float, because its density is 0.6 g/cm³
    3. Float, because it is large
    4. Sink, because its density is 1.67 g/cm³
    Show answer

    Answer: B. Density = 120 ÷ 200 = 0.6 g/cm³, less than that of water (1 g/cm³), so it floats.

  4. 4. The density of water is 1 g/cm³. In kg/m³ this is:

    1. 1 kg/m³
    2. 10 kg/m³
    3. 1000 kg/m³
    4. 0.001 kg/m³
    Show answer

    Answer: C. 1 g/cm³ = 1000 kg/m³, because 1 g = 0.001 kg and 1 cm³ = 10^−6 m³.

  5. 5. Why is the density of a gas much lower than that of a solid?

    1. Gas particles are very far apart
    2. Gas particles have no mass
    3. Gas particles are larger
    4. Gas particles are attracted strongly
    Show answer

    Answer: A. A given volume of gas contains few particles because they are far apart, so its mass per unit volume is very small.

Privacy · Terms · Refunds · Delivery