• Foundation
  • About 14 min
  • 5 practice questions

The heating curve of water: temperature rises and flat sections with heat calculations

Read a heating curve of ice, water and steam, and calculate the heat needed for temperature changes (Q = m c ΔT) and for changes of state (Q = m L).

If something looks wrong, please tell us.

If you heat a block of ice steadily and plot temperature against time, you get a staircase-like line: sloping parts where the temperature rises and flat parts where it does not. The picture sums up everything you learned about states and latent heat, and it supports short calculations. This lesson shows how to read the curve and how to find the heat for each part. The constants are approximate textbook values.

Reading the curve

  • Sloping part: one state only (ice, water or steam). The heat supplied raises the temperature because the particles move faster.
  • First flat part, at 0 °C: ice is melting. The heat supplied (latent heat of fusion) loosens the pattern of particles, and the temperature does not change until all the ice has melted.
  • Second sloping part: the liquid water warms from 0 °C to 100 °C.
  • Second flat part, at 100 °C: water is boiling. The heat supplied (latent heat of vaporisation) separates the particles into a gas.
  • Last sloping part: steam warms above 100 °C.

A flat part means a change of state is in progress. The longer flat part is the boiling one, because a lot more heat is needed to separate particles completely than to loosen them.

Two formulas

For a temperature change: Q = m × c × ΔT, where m is mass in kg, c is the specific heat capacity (the heat to raise 1 kg by 1 K) and ΔT is the change in temperature. For a change of state: Q = m × L, where L is the latent heat. Approximate values used here: c for ice is 2100 J/(kg K), c for water is 4200 J/(kg K), the latent heat of fusion of ice is 3.34 × 10⁵ J/kg and the latent heat of vaporisation of water is 22.6 × 10⁵ J/kg.

Worked example 1: warming water

How much heat is needed to warm 2 kg of water from 20 °C to 70 °C? Step 1: ΔT = 70 − 20 = 50 K. Step 2: Q = 2 × 4200 × 50. Step 3: Q = 420,000 J, or 420 kJ.

Worked example 2: melting then warming

How much heat turns 1 kg of ice at 0 °C into water at 20 °C? Step 1: melting, Q1 = 1 × 3.34 × 10⁵ = 334,000 J. Step 2: warming the water, Q2 = 1 × 4200 × 20 = 84,000 J. Step 3: total = 334,000 + 84,000 = 418,000 J. Notice that melting needs about four times as much heat as warming the water by 20 K.

Worked example 3: boiling

How much heat is needed to turn 0.2 kg of water at 100 °C into steam at 100 °C? Step 1: Q = m × L = 0.2 × 22.6 × 10⁵ = 4.52 × 10⁵ J = 452,000 J. The temperature stays at 100 °C throughout.

Worked example 4: the whole staircase

What is the total heat to take 1 kg of ice at −10 °C all the way to steam at 100 °C? Step 1: warm ice from −10 °C to 0 °C: 1 × 2100 × 10 = 21,000 J. Step 2: melt: 334,000 J. Step 3: warm water from 0 °C to 100 °C: 1 × 4200 × 100 = 420,000 J. Step 4: boil: 2,260,000 J. Step 5: total = 21,000 + 334,000 + 420,000 + 2,260,000 = 3,035,000 J, about 3.0 × 10⁶ J. More than 70% of the total goes into boiling.

Sloping part: Q = m c ΔT. Flat part: Q = m L and the temperature does not change. Add the stages in order.

Key takeaways

  • A flat part of a heating curve shows a change of state; the heat goes into latent heat.
  • Use Q = m c ΔT when the temperature changes and Q = m L when the state changes.
  • The boiling stage needs far more heat than the melting stage.
  • Work through the curve stage by stage and add the results.

Check your understanding

  1. 1. Heat needed to warm 2 kg of water from 20 °C to 70 °C (c = 4200 J/kg K) is:

    1. 420,000 J
    2. 84,000 J
    3. 588,000 J
    4. 210,000 J
    Show answer

    Answer: A. Q = 2 × 4200 × 50 = 420,000 J.

  2. 2. Heat needed to melt 0.5 kg of ice at 0 °C (L = 3.34 × 10⁵ J/kg) is:

    1. 334,000 J
    2. 83,500 J
    3. 167,000 J
    4. 668,000 J
    Show answer

    Answer: C. Q = 0.5 × 3.34 × 10⁵ = 167,000 J.

  3. 3. A flat part on a heating curve of water shows that:

    1. The heat supply has stopped
    2. The substance is changing state
    3. The substance has no particles
    4. The temperature is being lowered
    Show answer

    Answer: B. Heat is being supplied, but it goes into latent heat for melting or boiling, so the temperature stays constant.

  4. 4. Heat to boil 0.2 kg of water already at 100 °C (L = 22.6 × 10⁵ J/kg) is:

    1. 45,200 J
    2. 226,000 J
    3. 904,000 J
    4. 452,000 J
    Show answer

    Answer: D. Q = 0.2 × 22.6 × 10⁵ = 4.52 × 10⁵ J = 452,000 J.

  5. 5. Heat to turn 1 kg of ice at 0 °C into water at 20 °C (L = 3.34 × 10⁵ J/kg, c = 4200 J/kg K) is:

    1. 334,000 J
    2. 84,000 J
    3. 418,000 J
    4. 754,000 J
    Show answer

    Answer: C. Melting 334,000 J + warming 1 × 4200 × 20 = 84,000 J gives 418,000 J.

Privacy · Terms · Refunds · Delivery