• Foundation
  • About 14 min
  • 5 practice questions

Pressure, temperature and volume of gases

Learn Boyle's law and Charles's law in simple form and use them to solve basic gas problems with correct units.

If something looks wrong, please tell us.

Gas volume depends on pressure and temperature. Two simple laws describe this, and numerical problems based on them are common. The key is to use the right units, especially temperature in kelvin.

Boyle's law: pressure and volume

At constant temperature, the volume of a fixed mass of gas is inversely proportional to its pressure. If you squeeze the gas to half the volume, the pressure doubles. In symbols: P₁V₁ = P₂V₂. Pressure and volume can be in any units as long as both sides use the same ones.

Charles's law: volume and temperature

At constant pressure, the volume of a fixed mass of gas is directly proportional to its absolute temperature (in kelvin). In symbols: V₁/T₁ = V₂/T₂. Never put Celsius values into this formula; first convert using K = °C + 273.

Why do these laws work?

Squeezing a gas into a smaller volume makes its particles hit the walls more often, so pressure rises (Boyle). Heating a gas makes particles move faster and hit the walls harder; if the container can expand, the volume grows to keep pressure the same (Charles).

Worked examples

Example 1 (Boyle). A gas occupies 2 L at 1 atm. It is compressed at constant temperature to 0.5 L. Find the new pressure. P₂ = P₁V₁/V₂ = (1 × 2)/0.5 = 4 atm.

Example 2 (Charles). 300 mL of a gas at 27 °C is heated to 327 °C at constant pressure. Find its new volume. T₁ = 27 + 273 = 300 K and T₂ = 327 + 273 = 600 K. V₂ = V₁ × T₂/T₁ = 300 × 600/300 = 600 mL.

Example 3 (Boyle). A gas at 6 atm has a volume of 4 L. What is its volume at 3 atm if temperature is constant? V₂ = (6 × 4)/3 = 8 L.

Boyle: P₁V₁ = P₂V₂ (constant T). Charles: V₁/T₁ = V₂/T₂ (constant P, T in kelvin).

— Remember

Key takeaways

  • Boyle's law: pressure and volume are inversely proportional at constant temperature.
  • Charles's law: volume is proportional to kelvin temperature at constant pressure.
  • Always convert °C to K before using Charles's law.

Check your understanding

  1. 1. A gas occupies 3 L at 2 atm. What is its volume at 1 atm if the temperature does not change?

    1. 1.5 L
    2. 3 L
    3. 6 L
    4. 12 L
    Show answer

    Answer: C. Boyle's law: V₂ = P₁V₁/P₂ = (2 × 3)/1 = 6 L. Lower pressure, larger volume.

  2. 2. 250 mL of a gas at 27 °C is heated to 177 °C at constant pressure. What is the new volume?

    1. 1640 mL
    2. 450 mL
    3. 167 mL
    4. 375 mL
    Show answer

    Answer: D. T₁ = 300 K, T₂ = 450 K. V₂ = 250 × 450/300 = 375 mL. Putting Celsius values in (250 × 177/27) gives the wrong 1640 mL.

  3. 3. In which unit must temperature be used in Charles's law?

    1. Kelvin
    2. Degrees Celsius
    3. Degrees Fahrenheit
    4. Any unit, as long as both match
    Show answer

    Answer: A. Volume is proportional to absolute temperature, so kelvin must be used. Celsius has an arbitrary zero, so its ratios are wrong.

  4. 4. At constant temperature, the volume of a gas is halved. What happens to its pressure?

    1. It halves
    2. It doubles
    3. It stays the same
    4. It becomes four times
    Show answer

    Answer: B. Boyle's law: P × V is constant, so halving V doubles P.

  5. 5. 600 mL of a gas at 600 K is cooled to 300 K at constant pressure. What is its new volume?

    1. 1200 mL
    2. 600 mL
    3. 300 mL
    4. 150 mL
    Show answer

    Answer: C. Charles's law: V₂ = 600 × 300/600 = 300 mL. Halving the kelvin temperature halves the volume.

Sign in to keep track of the lessons you finish.

Next lesson → Evaporation, boiling and diffusion

Privacy · Terms · Refunds · Delivery