• Practice
  • About 14 min
  • 5 practice questions

Boyle's and Charles's laws: solving gas problems

Solve numerical problems using Boyle's law and Charles's law, always converting temperature to kelvin and keeping units consistent.

If something looks wrong, please tell us.

Gas law numericals are some of the most scoring questions in chemistry. They need only two formulas, but marks are lost for one reason again and again: using degrees Celsius instead of kelvin. This lesson gives you a clean method.

The two laws

  • Boyle's law: at constant temperature, the volume of a fixed mass of gas is inversely proportional to its pressure. P1 x V1 = P2 x V2.
  • Charles's law: at constant pressure, the volume of a fixed mass of gas is directly proportional to its absolute temperature. V1 / T1 = V2 / T2, with T in kelvin.

Kelvin = degrees Celsius + 273. Never put a Celsius value into Charles's law.

Four-step method

  1. Write down what is constant (temperature or pressure) to choose the law.
  2. Convert every temperature to kelvin.
  3. Write the formula and substitute.
  4. Check the direction: more pressure should mean less volume; more temperature should mean more volume.

Worked examples

Example 1 (Boyle). A gas occupies 600 mL at 2 atm. What is its volume at 4 atm at the same temperature? Working: P1V1 = P2V2, so 2 x 600 = 4 x V2, giving V2 = 1200 / 4 = 300 mL. Pressure doubled, volume halved, as expected.

Example 2 (Charles). 2 L of a gas at 27 degrees C is heated to 127 degrees C at constant pressure. Find the new volume. Working: T1 = 27 + 273 = 300 K and T2 = 127 + 273 = 400 K. V2 = V1 x T2 / T1 = 2 x 400 / 300 = 2.67 L (about 8/3 L).

Example 3 (find the pressure). A cylinder holds 5 L of gas at 1 atm. It is compressed to 2 L at constant temperature. What is the pressure? Working: P2 = P1V1 / V2 = 1 x 5 / 2 = 2.5 atm.

Example 4 (find the temperature). A gas has volume 300 mL at 300 K. At what temperature will it have 450 mL at constant pressure? Working: T2 = T1 x V2 / V1 = 300 x 450 / 300 = 450 K, which is 177 degrees C.

Common traps

  • Forgetting to convert to kelvin. Doubling the Celsius temperature does NOT double the volume.
  • Using Boyle's law when temperature changes as well. Then you need the combined law (next lesson).
  • Mixing units, such as litres on one side and mL on the other. Keep both volumes in the same unit.

Key takeaways: Boyle is inverse (P times V constant), Charles is direct (V over T constant), and kelvin is compulsory. Always sanity-check the direction of change.

Check your understanding

  1. 1. A gas occupies 600 mL at 2 atm. What is its volume at 3 atm at the same temperature?

    1. 900 mL
    2. 400 mL
    3. 300 mL
    4. 1200 mL
    Show answer

    Answer: B. P₁V₁ = P₂V₂: 2 × 600 = 3 × V₂, so V₂ = 1200/3 = 400 mL. More pressure, less volume.

  2. 2. 3 L of a gas at 27 °C is heated to 127 °C at constant pressure. What is its new volume?

    1. 14.1 L
    2. 2.25 L
    3. 4 L
    4. 3 L
    Show answer

    Answer: C. T₁ = 300 K, T₂ = 400 K. V₂ = 3 × 400/300 = 4 L. Using Celsius (3 × 127/27) gives the wrong 14.1 L.

  3. 3. At what temperature will a gas at 27 °C double its volume at constant pressure?

    1. 54 °C
    2. 600 °C
    3. 150 °C
    4. 327 °C
    Show answer

    Answer: D. The kelvin temperature must double: 300 K → 600 K, which is 600 − 273 = 327 °C.

  4. 4. 8 L of a gas at 1.5 atm is compressed to 3 L at constant temperature. What is the new pressure?

    1. 4 atm
    2. 0.56 atm
    3. 16 atm
    4. 2 atm
    Show answer

    Answer: A. P₂ = P₁V₁/V₂ = 1.5 × 8/3 = 12/3 = 4 atm.

  5. 5. Which of these is a mistake when solving a Charles's law problem?

    1. Keeping both volumes in mL
    2. Converting 27 °C to 300 K
    3. Putting Celsius temperatures straight into V₁/T₁ = V₂/T₂
    4. Checking that the volume rises when the temperature rises
    Show answer

    Answer: C. Charles's law needs absolute (kelvin) temperature. The other three steps are correct practice.

Privacy · Terms · Refunds · Delivery