• Practice
  • About 14 min
  • 5 practice questions

Mixed revision: statement, assertion-reason and multi-step questions on states of matter

Practise the question formats that close the chapter: checking several statements, assertion-reason items, and numerical questions that need two laws.

If something looks wrong, please tell us.

Competitive exams do not ask only for a number. They ask which statements are correct, whether an assertion is explained by its reason, or they chain two laws in one numerical question. The skill is to test each statement separately against one fact you know. This lesson shows how to do that with examples drawn from the whole chapter, and ends with a checklist of traps. Use it as a final revision before the self-check.

Method for statement questions

  • Read each statement alone and mark it true or false from one fact; do not look at the options yet.
  • Watch for absolute words such as 'always', 'only' and 'all', which usually make a statement false.
  • Check units and conditions in each statement (STP, kelvin, fixed amount of gas).
  • Only then match your marks to the options.

Worked example 1: statements on gases

Decide whether each statement is true. (i) At the same temperature all ideal gases have the same average kinetic energy per mole. True: it is (3/2)RT. (ii) 22.4 L is the volume of one mole of any gas at any temperature and 1 atm. False: it applies only at 0 °C and 1 atm. (iii) In Charles's law the temperature can be used in degrees Celsius. False: kelvin must be used. (iv) At a given temperature a lighter gas has a higher average speed. True, since speed depends on √(1/M). So the true statements are (i) and (iv).

Assertion-reason questions

An assertion-reason item has an Assertion (A) and a Reason (R). Decide whether A is true, whether R is true, and, if both are, whether R explains A. The four standard outcomes are: both true and R explains A; both true but R does not explain A; A true and R false; A false and R true.

Worked example 2: a pair where R explains A

A: Water boils at a lower temperature on a high mountain. R: The atmospheric pressure is lower at higher altitude. A is true. R is true. A liquid boils when its vapour pressure equals the external pressure, which is lower at altitude, so R explains A.

Worked example 3: a pair where R is false

A: Ice floats on water. R: The density of ice is greater than that of water. A is true, but R is false: ice floats because its density is less, as hydrogen bonds hold the molecules in an open pattern. The outcome is 'A true, R false'.

Worked example 4: a pair where both are true but unrelated

A: A gas has no fixed volume. R: A gas can be compressed. Both are true, but compressibility does not explain why a gas fills its whole container; that follows from the weak forces and free movement of particles. The outcome is 'both true, R does not explain A'.

Worked example 5: two laws in one question

3 L of a gas at 27 °C and 1 atm is heated to 127 °C and compressed to 2 atm. Step 1: T1 = 300 K, T2 = 400 K. Step 2: V2 = V1 × (P1 ÷ P2) × (T2 ÷ T1) = 3 × (1 ÷ 2) × (400 ÷ 300). Step 3: V2 = 3 × 0.5 × 1.333 = 2.0 L. Direction check: pressure doubled, which tends to halve the volume, while heating raised it by a third, so the volume is less than 3 L as found.

A checklist of traps

  • Using Celsius in a gas law, or 22.4 L/mol at a temperature other than 0 °C.
  • Treating evaporation like boiling: evaporation occurs at any temperature, at the surface only.
  • Believing the temperature rises during melting; it stays constant.
  • Mixing up rate and time in Graham's law.
  • Calling plasma 'a hot gas'; it contains free ions and electrons.

Test each statement on its own against a single known fact. In assertion-reason items, decide A, then R, then whether R explains A.

Key takeaways

  • Absolute words in a statement are a warning sign.
  • In an assertion-reason item, a true reason may still fail to explain the assertion.
  • Chain two laws by writing V2 = V1 × (P1/P2) × (T2/T1) and checking each factor's direction.
  • Revise the traps list before an exam.

Check your understanding

  1. 1. Which statement is correct?

    1. 22.4 L is the molar volume of any gas at any temperature
    2. At one temperature, all ideal gases have equal molar kinetic energy
    3. Charles's law works with temperatures in degrees Celsius
    4. Evaporation happens only at the boiling point of a liquid
    Show answer

    Answer: B. Molar kinetic energy is (3/2)RT. The others are false: 22.4 L applies at STP, Charles's law needs kelvin, and evaporation occurs at any temperature.

  2. 2. A: Water boils at a lower temperature on a mountain top. R: Atmospheric pressure is lower at high altitude. Choose the outcome.

    1. Both true, and R explains A
    2. Both true, but R does not explain A
    3. A true, R false
    4. A false, R true
    Show answer

    Answer: A. A liquid boils when its vapour pressure equals the external pressure. Lower pressure on a mountain means a lower boiling point, so R explains A.

  3. 3. A: Ice floats on water. R: The density of ice is greater than that of water. Choose the outcome.

    1. Both true, and R explains A
    2. Both true, but R does not explain A
    3. A true, R false
    4. A false, R true
    Show answer

    Answer: C. Ice floats because its density is lower than water's (open hydrogen-bonded pattern), so R is false.

  4. 4. 3 L of gas at 27 °C and 1 atm is heated to 127 °C and compressed to 2 atm. The final volume is:

    1. 4.0 L
    2. 1.5 L
    3. 2.0 L
    4. 2.7 L
    Show answer

    Answer: C. V2 = 3 × (1 ÷ 2) × (400 ÷ 300) = 2.0 L.

  5. 5. Which is true during the melting of a pure solid at its melting point?

    1. The temperature stays constant while heat is absorbed
    2. The temperature keeps rising steadily as heat is absorbed
    3. The solid gives out heat to its surroundings as it melts
    4. The particles of the solid stop moving completely
    Show answer

    Answer: A. The heat is used as latent heat to loosen the arrangement of particles, so the temperature of the pure substance stays constant until melting is complete.

Privacy · Terms · Refunds · Delivery