- Practice
- About 12 min
- 5 practice questions
Particle model and changes of state: exam problems
Apply the particle model to explain why solids, liquids and gases behave differently, and answer typical questions on melting, boiling, evaporation and sublimation.
If something looks wrong, please tell us.
Questions on states of matter often look easy but hide small traps: a temperature that does not change, a word like 'sublimation' used loosely, or a confusion between evaporation and boiling. This lesson sharpens the particle model so that you can answer such questions quickly and correctly.
The particle model in one table
| Property | Solid | Liquid | Gas |
|---|---|---|---|
| Spacing of particles | Very close | Close | Very far apart |
| Intermolecular force | Strongest | Moderate | Negligible |
| Movement | Vibrate about fixed positions | Slide past each other | Move freely and randomly |
| Shape | Fixed | Takes shape of container | Takes shape of container |
| Volume | Fixed | Fixed | Fills the container |
| Compressibility | Almost none | Very little | High |
Changes of state and the flat part of the graph
When a pure solid is heated, its temperature rises until it reaches the melting point. During melting the temperature stays constant even though heat is still supplied. This heat is called latent heat (latent means hidden). It is used to overcome the forces holding the particles together, not to make them move faster. The same happens at the boiling point.
- Melting: solid to liquid. Freezing: liquid to solid.
- Boiling or vaporisation: liquid to gas. Condensation: gas to liquid.
- Sublimation: solid directly to gas, for example camphor, naphthalene and ammonium chloride. The reverse (gas directly to solid) is called deposition.
- Evaporation happens at any temperature and only at the surface. Boiling happens at one fixed temperature (at a given pressure) throughout the liquid.
Worked examples
Example 1. A beaker holds ice and water at 0 degrees C and is heated gently while being stirred. What does the thermometer read until all the ice has melted? Working: Melting is in progress, so the heat supplied is used as latent heat. The reading stays at 0 degrees C until the last ice melts, and only then rises.
Example 2. Why does wet cloth dry faster on a windy, warm day? Working: Evaporation needs particles at the surface to escape. Higher temperature gives particles more energy, wind carries the vapour away so fewer return, and a larger surface exposes more particles. So the cloth dries faster.
Example 3. Why does evaporation cause cooling? Working: The fastest, most energetic particles escape, so the average kinetic energy of the particles left behind falls and the liquid cools. This is why sweating cools the body and an earthen pot keeps water cool.
During a change of state the temperature of a pure substance stays constant; heat supplied changes the arrangement of particles, not their average speed.
Key takeaways: Learn the table of properties, remember that temperature is flat during a change of state, and never confuse evaporation (surface, any temperature, cooling) with boiling (whole liquid, fixed temperature).
Check your understanding
-
1. A beaker of ice and water at 0 °C is heated gently and stirred. What does the thermometer read until the last of the ice melts?
- 0 °C, unchanged
- It rises slowly the whole time
- It falls below 0 °C
- It rises to 100 °C
Show answer
Answer: A. While melting is in progress the heat goes in as latent heat, so the reading stays at 0 °C and rises only after all the ice has melted.
-
2. Which of these is an example of sublimation?
- Ice melting into water
- Naphthalene balls slowly disappearing in a cupboard
- Dew forming on grass
- Candle wax melting
Show answer
Answer: B. Naphthalene turns directly from solid to vapour. Melting goes solid to liquid; dew is condensation (gas to liquid).
-
3. What is the change of a gas directly into a solid called?
- Sublimation
- Condensation
- Deposition
- Solidification
Show answer
Answer: C. Gas to solid directly is deposition, the reverse of sublimation. Condensation is gas to liquid; solidification is liquid to solid.
-
4. Why does evaporation cause cooling?
- Evaporation releases heat into the liquid
- The liquid's particles become heavier
- Air pushes heat into the liquid
- The most energetic particles escape, so the average kinetic energy of those left falls
Show answer
Answer: D. The fastest surface particles leave; the remaining particles have a lower average kinetic energy, so the liquid is cooler.
-
5. Why can a gas be compressed much more easily than a liquid?
- Gas particles are far apart with large empty spaces between them
- Gas particles are heavier
- Gas particles attract each other strongly
- Liquid particles are far apart
Show answer
Answer: A. There is a lot of empty space between gas particles to squeeze out; liquid particles are already close together.
Sign in to keep track of the lessons you finish.