- Practice
- About 15 min
- 5 practice questions
Gas problems with changing amounts: connected flasks, leaks and used cylinders
Solve exam problems in which the amount of gas changes: two flasks joined by a valve, a vessel heated while open, and a cylinder from which gas is drawn.
If something looks wrong, please tell us.
In the usual gas-law problem the amount of gas is fixed. Exam writers like to vary this: they join two vessels, let gas escape on heating, or draw gas from a cylinder. The method is still short once you use one idea: the product PV at a fixed temperature is proportional to the number of moles (PV = nRT). So you can add or subtract PV products to track the gas. This lesson works the four commonest patterns. All numbers are illustrative practice values.
The central idea
At constant temperature, n ∝ PV. If gas is neither added nor removed, total PV before equals total PV after. If the temperature changes, n ∝ PV ÷ T. The amount of gas is what is conserved, not the pressure or the volume. Always ask: what is the total volume afterwards, and is any gas lost?
Pattern 1: two flasks joined by a valve
Flask A of 2.0 L holds gas at 3.0 atm, and flask B of 3.0 L holds the same gas at 1.0 atm, at the same temperature. The valve is opened. Total PV before = 3.0 × 2.0 + 1.0 × 3.0 = 6.0 + 3.0 = 9.0 L atm. Total volume after = 2.0 + 3.0 = 5.0 L. Final pressure = 9.0 ÷ 5.0 = 1.8 atm. Check: the answer must lie between 1.0 and 3.0 atm, closer to the pressure in the larger flask. If two different non-reacting gases are in the flasks, the same calculation gives the pressure of each in the whole volume, and the total is the sum.
Pattern 2: an open vessel is heated
A rigid vessel open to the air at constant pressure is heated from 300 K to 450 K. Its volume is fixed, so the number of moles inside is proportional to 1 ÷ T. Moles remaining = 300 ÷ 450 = 2/3, so 1/3 of the gas escapes. To make 1/4 escape, the fraction remaining is 3/4 = 300 ÷ T2, so T2 = 400 K. A common mistake is to use Charles's law for the vessel as if it could expand.
Pattern 3: how many vessels can a cylinder fill?
A cylinder of 10 L holds gas at 20 atm. How many 2 L flasks can be filled to 1 atm at the same temperature? Total gas at 1 atm would occupy 10 × 20 ÷ 1 = 200 L. But the cylinder cannot be emptied below 1 atm: it still holds 10 L at 1 atm. So the usable volume = 200 − 10 = 190 L, and the number of flasks = 190 ÷ 2 = 95. Forgetting the gas that stays in the cylinder, which gives 100, is the usual trap.
Pattern 4: mass used from a cylinder
A cylinder of volume 4.926 L contains oxygen at 5 atm and 300 K. Moles = PV ÷ RT = 5 × 4.926 ÷ (0.0821 × 300) = 24.63 ÷ 24.63 = 1.0 mol, which is 32 g. After some gas is used the pressure falls to 3 atm at the same temperature. Moles now = 3 × 4.926 ÷ 24.63 = 0.6 mol. Gas used = 0.4 mol = 0.4 × 32 = 12.8 g. Since volume and temperature are fixed, the fraction used is (5 − 3) ÷ 5 = 0.4 without any need to compute R.
| Pattern | What is conserved | Formula |
|---|---|---|
| Joined flasks | Total moles | P = (P1V1 + P2V2) ÷ (V1 + V2) |
| Open vessel heated | Volume fixed, moles fall | n2 ÷ n1 = T1 ÷ T2 |
| Cylinder refilling vessels | Total PV at fixed T | (P1V1 − P_final V1) ÷ (P V of vessel) |
| Gas used from cylinder | Fixed V and T | Fraction used = (P1 − P2) ÷ P1 |
When the amount of gas changes, track PV (at constant T) or PV ÷ T. Do not apply Boyle's or Charles's law to the whole system unless the amount is fixed.
Key takeaways
- At constant T, n ∝ PV; add PV values to combine gases.
- A heated open rigid vessel loses gas in proportion to 1 − T1/T2.
- A cylinder cannot be emptied below the pressure of the outside; subtract the gas that remains.
- With fixed V and T, the fraction of gas used equals the fall in pressure divided by the original pressure.
Check your understanding
-
1. Flask A (4.0 L, 2.0 atm) is connected to flask B (6.0 L, 3.0 atm) containing the same gas at the same temperature. The final pressure is:
- 2.5 atm
- 2.6 atm
- 2.4 atm
- 5.0 atm
Show answer
Answer: B. Total PV = 4 × 2 + 6 × 3 = 8 + 18 = 26 L atm; volume = 10 L; P = 2.6 atm.
-
2. A rigid vessel open to the air is heated from 300 K to 600 K at constant pressure. The fraction of the original gas that escapes is:
- 1/4
- 1/3
- 2/3
- 1/2
Show answer
Answer: D. Moles remaining = 300 ÷ 600 = 1/2, so half of the gas escapes.
-
3. A 5 L cylinder holds gas at 12 atm. How many 1 L balloons can be filled to 1 atm at the same temperature, assuming the cylinder is emptied down to 1 atm?
- 60
- 55
- 12
- 65
Show answer
Answer: B. Total gas at 1 atm = 5 × 12 = 60 L; the cylinder keeps 5 L at 1 atm, so 55 L are usable: 55 balloons.
-
4. A 4.926 L cylinder of oxygen (32 g/mol) at 300 K falls from 5 atm to 3 atm after use. The mass of oxygen used is:
- 12.8 g
- 19.2 g
- 32 g
- 6.4 g
Show answer
Answer: A. Moles at 5 atm = 1.0 and at 3 atm = 0.6, so 0.4 mol = 12.8 g were used.
-
5. A gas at 27 °C and 2 atm in a closed rigid vessel is heated to 87 °C. The final pressure is:
- 2.4 atm
- 2.0 atm
- 6.5 atm
- 1.7 atm
Show answer
Answer: A. Volume and amount are fixed, so P ∝ T: P2 = 2 × 360 ÷ 300 = 2.4 atm.
Sign in to keep track of the lessons you finish.