• Practice
  • About 15 min
  • 5 practice questions

Conduction, convection and radiation

Compare the three modes of heat transfer and use the conduction formula and Stefan's law.

If something looks wrong, please tell us.

Heat can reach us from a stove by touch, by moving air, or across empty space from the Sun. These are conduction, convection and radiation. Numerical questions are mainly on conduction and radiation.

Three modes

  • Conduction: heat passes through a material from particle to particle without the material moving. Metals conduct best.
  • Convection: heat is carried by the movement of a fluid, as in sea breezes and heating water in a pan.
  • Radiation: heat travels as electromagnetic waves and needs no medium. All bodies emit radiation; dark, rough surfaces absorb and emit better than shiny, smooth ones.

Formulae

Conduction through a slab: Q/t = k A (T₁ − T₂)/L, where k is the thermal conductivity. Stefan-Boltzmann law: the power radiated by a perfect black body of area A at temperature T (in kelvin) is P = σ A T⁴. Doubling the absolute temperature multiplies the radiated power by 2⁴ = 16.

Worked examples

Example 1. A slab has k = 0.8 W/m K, area 2 m², thickness 0.1 m, and faces 20 K apart. Q/t = 0.8 × 2 × 20/0.1 = 320 W.

Example 2. The temperature of a black body is raised from 300 K to 600 K. The radiated power increases by (600/300)⁴ = 16 times.

Example 3. Two rods of the same material and length have areas in the ratio 1 : 2 and the same end temperatures. The rate of heat flow is in the ratio 1 : 2.

Example 4. Why is a cooking pan made of metal with a wooden handle? Metal has a high conductivity so heat reaches the food quickly, while wood has a low conductivity so the handle stays cool.

Q/t = kA ΔT/L. P ∝ T⁴ (T in kelvin). Radiation needs no medium; convection needs a fluid.

— Remember

Key takeaways

  • Conduction rate is proportional to area and temperature difference, and inversely proportional to thickness.
  • Radiated power depends on T⁴, with T in kelvin.
  • Only radiation can travel through a vacuum.

Check your understanding

  1. 1. A slab has k = 0.5 W/m K, area 4 m² and thickness 0.25 m. Its faces differ by 25 K. How much heat flows through it each second?

    1. 12.5 W
    2. 50 W
    3. 800 W
    4. 200 W
    Show answer

    Answer: D. Q/t = k A ΔT / L = 0.5 × 4 × 25 ÷ 0.25 = 50 ÷ 0.25 = 200 W.

  2. 2. A black body is heated from 200 K to 600 K. By what factor does its radiated power increase?

    1. 9
    2. 81
    3. 27
    4. 3
    Show answer

    Answer: B. P ∝ T⁴. (600/200)⁴ = 3⁴ = 81.

  3. 3. Two rods of the same material and cross-section have lengths in the ratio 1 : 2 and the same end temperatures. What is the ratio of their rates of heat flow?

    1. 2 : 1
    2. 1 : 2
    3. 1 : 4
    4. 4 : 1
    Show answer

    Answer: A. Q/t = kAΔT/L, so the rate is inversely proportional to length: 1/1 : 1/2 = 2 : 1.

  4. 4. A black body is heated from 27 °C to 327 °C. By what factor does its radiated power increase?

    1. About 21 500
    2. 12
    3. 2
    4. 16
    Show answer

    Answer: D. Use kelvin: 300 K to 600 K, a factor of 2. P ∝ T⁴, so 2⁴ = 16. Using Celsius (327/27 ≈ 12) gives the wrong 21 500.

  5. 5. Two identical kettles of boiling water are left to cool, one shiny and one dull black. Which loses heat faster by radiation?

    1. The shiny kettle
    2. Both lose heat at the same rate
    3. The dull black kettle
    4. Neither radiates, as they are not hot enough
    Show answer

    Answer: C. All bodies radiate. Dark, rough surfaces emit (and absorb) radiation better than shiny, smooth ones.

Privacy · Terms · Refunds · Delivery