• Practice
  • About 14 min
  • 5 practice questions

Gas law problems: combined law, moles and common traps

Solve the main types of gas-law question: before-and-after problems, finding moles, gas escaping from a vessel, density changes and gauge pressure.

If something looks wrong, please tell us.

Gas-law questions look different on the surface but fall into a few types. Each has a standard method and a standard trap. This lesson takes them one at a time. All data are made up for practice. Always change Celsius to kelvin first, using T = t + 273.

Type 1: before and after (fixed amount of gas)

Use P₁V₁/T₁ = P₂V₂/T₂. If a quantity does not change, cross it out. Then solve for the unknown. Pressure and volume can stay in any units, as long as both sides use the same ones, but T must be in kelvin.

Worked example 1: all three change

A gas occupies 5 L at 2 atm and 27 °C. It is changed to 4 atm and 127 °C. T₁ = 300 K and T₂ = 400 K. V₂ = P₁V₁T₂/(P₂T₁) = 2 × 5 × 400/(4 × 300) = 4000/1200 = 3.33 L.

Type 2: finding the amount of gas

Use PV = nRT with R = 8.31 J/mol K. Use SI units: P in pascal, V in m³, T in K. Remember 1 litre = 10⁻³ m³.

Worked example 2: how many moles?

A gas at 1 × 10⁵ Pa and 300 K occupies 5 litres = 5 × 10⁻³ m³. n = PV/RT = (1 × 10⁵ × 5 × 10⁻³)/(8.31 × 300) = 500/2493 = 0.20 mol.

Type 3: gas escaping from an open vessel

When an open vessel is heated, the pressure and volume stay the same, so PV = nRT shows that n ∝ 1/T. The number of moles left falls as the temperature rises.

Worked example 3: a heated flask

An open flask contains air at 300 K. It is heated to 400 K at the same pressure. The fraction of air remaining = n₂/n₁ = T₁/T₂ = 300/400 = 3/4. So one quarter of the air has escaped.

Type 4: density and bubbles

Since density = mass/volume and the mass is fixed, density ∝ P/T. For a bubble rising in a pond at constant temperature, PV is constant. At a depth of about 10 m, the water adds about 1 atm to the atmosphere's 1 atm (a round value), so the pressure is about 2 atm.

Worked example 4: a rising bubble

A bubble has a volume of 2 cm³ at a depth of 10 m, where the pressure is 2 atm. As it reaches the surface, where the pressure is 1 atm (assuming the temperature is the same), V₂ = P₁V₁/P₂ = 2 × 2/1 = 4 cm³. The bubble doubles in size. For the same pressure but a temperature rise from 300 K to 400 K, the density of a gas falls by the ratio 300/400, or to 75 percent.

Type 5: gauge pressure

A tyre gauge shows gauge pressure, which is the pressure above the atmosphere. The gas laws need absolute pressure = gauge + atmospheric pressure.

Worked example 5: a tyre

A tyre shows a gauge pressure of 2 atm at 300 K, so the absolute pressure is 3 atm (taking the atmosphere as 1 atm). On heating to 330 K at constant volume, P₂ = 3 × 330/300 = 3.3 atm absolute, which is a gauge reading of 2.3 atm. If the gauge value 2 had been used directly, the answer would have been 2.2 atm, which is wrong.

Convert to kelvin. Use absolute pressure. For an open vessel n ∝ 1/T. For a fixed mass, density ∝ P/T.

— Rule to remember

Key takeaways

  • Cross out the constant quantity and solve.
  • Use SI units for PV = nRT.
  • Add atmospheric pressure to a gauge reading.

Check your understanding

  1. 1. A gas has a volume of 6 L at 1 atm and 300 K. It is heated to 600 K at constant pressure. The new volume is:

    1. 3 L
    2. 6 L
    3. 24 L
    4. 12 L
    Show answer

    Answer: D. At constant pressure V ∝ T. The temperature doubles, so the volume doubles to 12 L.

  2. 2. An open vessel of air is heated from 300 K to 600 K at constant pressure. The fraction of the original air that remains is:

    1. 2
    2. 1/2
    3. 1/4
    4. 3/4
    Show answer

    Answer: B. n ∝ 1/T, so n₂/n₁ = 300/600 = 1/2.

  3. 3. A tyre gauge shows 1 atm above the atmosphere (1 atm). The absolute pressure of the air in it is:

    1. 1 atm
    2. 0 atm
    3. 3 atm
    4. 2 atm
    Show answer

    Answer: D. Absolute pressure = gauge + atmospheric = 1 + 1 = 2 atm.

  4. 4. A fixed mass of gas is kept at constant temperature. Its pressure is tripled. Its density becomes:

    1. three times
    2. one third
    3. unchanged
    4. nine times
    Show answer

    Answer: A. At constant T, V ∝ 1/P, so the volume falls to a third. The mass is the same, so the density triples.

  5. 5. The amount of gas in a container of 8.31 × 10⁻³ m³ at 1 × 10⁵ Pa and 100 K is (R = 8.31 J/mol K):

    1. 10 mol
    2. 1 mol
    3. 0.1 mol
    4. 8.31 mol
    Show answer

    Answer: B. n = PV/RT = (1 × 10⁵ × 8.31 × 10⁻³)/(8.31 × 100) = 831/831 = 1 mol.

Privacy · Terms · Refunds · Delivery