- Practice
- 15 practice questions
Final self-assessment: Heat and thermodynamics practice
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions on heat and thermodynamics practice first, then check your answers and read each explanation. The questions follow the lessons in order - questions 1-3: lesson 1 (Temperature scales and thermal expansion); questions 4-6: lesson 2 (Specific heat and calorimetry); questions 7-9: lesson 3 (Latent heat and change of state); questions 10-12: lesson 4 (Conduction, convection and radiation); questions 13-15: lesson 5 (Laws of thermodynamics and heat engines). Revisit the lesson for any question you missed.
Final self-assessment
-
1. At what temperature does a Fahrenheit thermometer read exactly twice the Celsius reading?
- 80 °C
- 160 °C
- −40 °C
- 320 °C
Show answer
Answer: B. F = (9/5)C + 32 = 2C, so 0.2C = 32 and C = 160 °C (F = 320 °F).
-
2. A metal sphere of volume 500 cm³ has α = 1 × 10⁻⁵ per °C. By how much does its volume increase when heated by 100 °C?
- 0.5 cm³
- 1.0 cm³
- 1.5 cm³
- 15 cm³
Show answer
Answer: C. γ = 3α = 3 × 10⁻⁵ per °C. ΔV = 3 × 10⁻⁵ × 500 × 100 = 1.5 cm³.
-
3. A beaker of water at 4 °C is cooled to 1 °C. What happens to its volume?
- It decreases
- It stays the same
- It decreases and the water freezes
- It increases
Show answer
Answer: D. Water is densest at 4 °C. Cooling it below 4 °C makes it expand (anomalous expansion), so its volume increases.
-
4. A 0.5 kg copper block (c = 400 J/kg K) at 100 °C is dropped into 0.5 kg of water (c = 4200 J/kg K) at 20 °C. What is the final temperature, ignoring losses?
- 60 °C
- About 23.6 °C
- About 33 °C
- About 27 °C
Show answer
Answer: D. 0.5 × 400 × (100 − T) = 0.5 × 4200 × (T − 20). 20 000 − 200T = 2100T − 42 000, so 2300T = 62 000 and T ≈ 27.0 °C.
-
5. A 1500 W heater warms 3 kg of water from 20 °C to 80 °C. How long does it take, ignoring losses? (c = 4200 J/kg K)
- 2.8 minutes
- 12.6 minutes
- 8.4 minutes
- 504 minutes
Show answer
Answer: C. Heat = 3 × 4200 × 60 = 756 000 J. Time = 756 000 ÷ 1500 = 504 s = 8.4 minutes.
-
6. How much water at 10 °C must be added to 2 kg of water at 70 °C to give a mixture at 30 °C?
- 4 kg
- 2 kg
- 1 kg
- 6 kg
Show answer
Answer: A. Heat gained = heat lost: m × (30 − 10) = 2 × (70 − 30), so 20m = 80 and m = 4 kg.
-
7. 20 g of steam at 100 °C is passed into 200 g of water at 20 °C until all the steam condenses. What is the final temperature? (vaporisation 540 cal/g)
- 100 °C
- About 76 °C
- About 27 °C
- About 54 °C
Show answer
Answer: B. Heat from steam: 20 × 540 + 20 × (100 − T). Heat to water: 200 × (T − 20). 10 800 + 2000 − 20T = 200T − 4000, so 220T = 16 800 and T ≈ 76.4 °C.
-
8. 30 g of ice at 0 °C is added to 100 g of water at 20 °C. How much ice is left when equilibrium is reached? (fusion 80 cal/g)
- None
- 5 g
- 25 g
- 10 g
Show answer
Answer: B. The water can give 100 × 20 = 2000 cal by cooling to 0 °C. That melts 2000 ÷ 80 = 25 g, so 30 − 25 = 5 g of ice remains, at 0 °C.
-
9. How much heat turns 5 g of ice at −20 °C into steam at 100 °C? (ice 0.5 cal/g °C, fusion 80 cal/g, water 1 cal/g °C, vaporisation 540 cal/g)
- 3600 cal
- 3150 cal
- 950 cal
- 3650 cal
Show answer
Answer: D. Warm ice: 5 × 0.5 × 20 = 50. Melt: 5 × 80 = 400. Warm water: 5 × 100 = 500. Boil: 5 × 540 = 2700. Total = 3650 cal.
-
10. A wall of area 15 m² and thickness 0.3 m has k = 0.8 W/m K. Inside is 25 °C and outside 5 °C. How much heat is conducted through it each second?
- 800 W
- 240 W
- 1600 W
- 400 W
Show answer
Answer: A. Q/t = k A ΔT / L = 0.8 × 15 × 20 ÷ 0.3 = 240 ÷ 0.3 = 800 W.
-
11. Two rods of the same material and length have radii in the ratio 1 : 2 and the same end temperatures. What is the ratio of their rates of heat flow?
- 1 : 2
- 2 : 1
- 1 : 4
- 4 : 1
Show answer
Answer: C. Rate ∝ area, and area ∝ radius². (1 : 2)² = 1 : 4.
-
12. A black body is heated from 27 °C to 127 °C. By what factor does its radiated power increase?
- 4/3, about 1.3
- 16/9, about 1.8
- 256/81, about 3.2
- About 490
Show answer
Answer: C. Use kelvin: 300 K to 400 K. P ∝ T⁴, so the factor is (4/3)⁴ = 256/81 ≈ 3.16. Using Celsius (127/27)⁴ gives the wrong 490.
-
13. The sink of a Carnot engine is at 27 °C. What source temperature gives an efficiency of 40%?
- 227 °C
- 500 °C
- 477 °C
- 67.5 °C
Show answer
Answer: A. T₂ = 300 K. 0.4 = 1 − 300/T₁, so T₁ = 300 ÷ 0.6 = 500 K = 227 °C.
-
14. An ideal gas expands isothermally and does 250 J of work. What are the heat absorbed and the change in internal energy?
- Q = 0 and ΔU = −250 J
- Q = 500 J and ΔU = 250 J
- Q = 250 J and ΔU = 250 J
- Q = 250 J and ΔU = 0
Show answer
Answer: D. In an isothermal process of an ideal gas ΔU = 0, so Q = W = 250 J.
-
15. An ideal gas at 27 °C is heated at constant pressure until its volume doubles. What is its final temperature?
- 54 °C
- 327 °C
- 600 °C
- 327 K
Show answer
Answer: B. PV = nRT with P constant, so V ∝ T (in kelvin). 300 K × 2 = 600 K = 327 °C. Doubling the Celsius value (54 °C) is wrong.
Sign in to keep track of the lessons you finish.